Відео

thank you!!!!! 🙏. asked my ass!

Did this on my 2017 Golf 7.5 GTi which has Automatic Parking Brake. Instructions are perfect, no issues. Thanks so much for the instructional video.

Thanks to your video i did this job perfectly today! Vw golf 7

Hows the fitment of the Rugged 9mm Tri Lug adapter on the integrated B and T tri lugs? Any wobble?

I KNEW I’d find some work around vs going the computer way blah blah. Thank you so much for this. My s3 rear brakes will now be going on thanks to you!

Drove it all day then out of nowhere this happened. Not even a warning.

Huge thank you, this made it easy and worked like a charm.

Hmmm... There is nothing easier than use VCDS or other good car diagnostic tool. You can't call yourself "car mechanic" if you dont owe one... But it is good to know an "opposite" way for emergency situations. So thanks for your video.

If I were your coach I would tell you that you’re turning in early often, you are also not using all of the track. Turn one is a great example,,once you have apexed start feeding some throttle and unwind the wheel a bit.

Bigman you just saved me some bread 💰 💙

Hi thanks so much for this tutorial i tried to attempt this with no knowledge and freaked out when i couldent do it and the car was left on my friends hoist for a couple of days. Much appreciated 🙏

Where can I get the seat please? Great video thanks. 😃👍

7:00 Clockwise , but even on the other side ?

Great video but never , never put copper grease on the back of break pads. That was something our parents did years ago. No need now and it bleeds through any holes in the back plate and melts when hot.

🇬🇧 2017MY Golf GTI DSG Keyless Stop/Start These instructions worked great. It was only on the second side that I realised it wasn’t necessary to remove the pad carrier bolts in order to replace the brake discs. As others have described, the EPB is disabled by putting your foot on the brake and turning on the ignition/ pressing start-stop. Remove your foot from the brake. With the gear lever in park, switch off the auto-hold feature and then the parking brake before turning off the ignition/ pressing start-stop. I found that it wasn’t necessary to leave the ignition on whilst working on the brakes. I did unplug the EPB module whilst I was working on it but I’m not sure that’s strictly necessary. Fitted Brembo discs and pads front and rear for £275 versus £1100 for parts and labour at the VW dealer. 🙌🏻

God bless you brother.

Is it just a regular 9mm socket to wind back the spline

Great job, thanks for the video!

Dude this is going to save me few hundred bucks.even replacing rotors too 👍 cheers guys 😉

Playing with brakes ??? Good job

Just wanna say thanks for this video. Followed this tutorial today on my Golf R MK7 and it worked a treat at a fraction of the ridiculous cost that I would have been charged (£35 as opposed to £150+) Thanks again buddy!

Pfusch vom feinsten. Golf R fahren aber keine Kohle für nen anständigea Diagnose System

Very good idea, but use 12v to the motor , when the piston turns ,you can pull the piston in.

Great video done my 2014 audi a3 tdi sline following these steps no fault codes thanks👍

gootです。

I have a 2016 Audi A3 8V Quattro and I can’t find rear brake kits for my car. Any help suggestions from anyone would be greatly appreciated!

Thanks for this... worked perfect. Simple allen wrench works best for loosening the pins. Also, confirming what some other commenters said - you don’t need to remove the carrier with the special 14mm triple square to swap in new rotors. Used a similar clamp to push the piston back in and it also worked perfect. Remove the electric plug on the motor to free up the caliper to make it easy to work on. So, basically no special tools required!

Great tutorial 👍. Still can't understand why VW didn't just add the handbrake (e-brake) rewind function to the in-car system menu.

I'm in canada. Whats the cheapest tool I can get to deal with this electric parking brake issue.

Rather than removing the motor, using a jump start pack you can unplug the electrical connector and apply 12v power. Only two wires and you simply connect in the orientation to rewind. When reinstalling, from the drivers seat simply keep applying the park brake until it winds enough. It only winds a small amount each time, so it takes a few goes.

Very nice work. Thank you for the vidéo.

Awesome cheers, completed this morning on a MY17 DSG 1.4 Auto. Test drove and no problems or codes etc. (took an angle grinder to my 7mm socket to make it 5mm shorter lol) That was the trickest bit. 1hr on 1st wheel, 30mins on 2nd . . .taking it slow and easy.

Vag com 0% / hand Made 100% Great 👌🏼

One of the best tutorials for brake pad replacement with e brake I've seen so far. 👌

Buy a 25€ VDCS from AliExpress, save time and allow you to do so many other thing.

Excellent tip on the handbrake motor worked perfectly ,with lockdown happening ,saved me a lot of hassle Many Thanks 10/10

Cool video. What mount did u need to mount on B&T 3 lug?

Great video and well explained. Thanks.

Great video!

Hi, would this method of pushing the piston hack in with my Mark 7 golf 2013 blue motion model. car sat for a week as winter temperatures came in. was working fine prior to this. but it has left the drivers rear sticking. 150 for a new caliper surely pushing the piston back slightly would be enough?

Great tutorial. Have to do discs and pads on mk7.5 GTD in coming weeks. Thanks guy.

Procedure worked perfectly on a Mk7 golf gtd without vag com

Just bought mine...Freaked me out too :/. 2017 Golf R. Battery did last 3.5yrs so...oh well. There is an indicator on the battery for when it's dead or about to die. I have to pay more attention to it because the dealership ain't. LOL

Thank you 👍👍👍 lifesaver

This was a massive help! Saved me a big chunk of money. Works perfectly!

This made me think my ecu went bye bye but thank god it’s just a dead batt

Literally happened to me at 1am last night and I freaked out had no idea why this was happening. I was hoping just battery problem, this video is exactly what I was seeing. Thanks for posting

great video! i have just one question... at the end... it is important if you first lock or unlock parking brake...? first tighten ?

Great video.Would this be the same for DSG Transmission?

Thank you! This was helpful :)