- 6
- 12 395
Tired Tim FPV
Приєднався 3 бер 2014
Herzlich Wilkommen auf meinem Kanal.
Ich bin ein begeisterter Modellflieger aus Süddeutschland und mache Videos rund um mein Hobby.
Lasst gerne ein Like oder Abo da. Über Konstruktive Kritik freue ich mich ebenso.
Viel Spaß beim Anschauen.
Ich bin ein begeisterter Modellflieger aus Süddeutschland und mache Videos rund um mein Hobby.
Lasst gerne ein Like oder Abo da. Über Konstruktive Kritik freue ich mich ebenso.
Viel Spaß beim Anschauen.
DIY CNC Router milling 5083 Aluminium
Just a little Video about my DIY CNC Router milling a part for a soapbox out of 5083 Aluminium.
I designed the part in Fusion 360 and programmed it with Fusion 360 CAM.
The CNC Controller is a ESTLCAM breakoutboard.
I designed the part in Fusion 360 and programmed it with Fusion 360 CAM.
The CNC Controller is a ESTLCAM breakoutboard.
Переглядів: 11 004
Відео
Extreme Flight Edge 540 74"
Переглядів 9036 років тому
Pilot: Luis Baumhackl Setup: Motor: Hacker A60-5s Prop: Xoar 21x10 Regler: Master Basic 90-OPTO Servos: HS5565 BEC: Jeti Sender: Mz 24hott
Planechase and New Rates
Переглядів 1366 років тому
As it is finally Spring we went flying at the Teck and i chased my friends Durafly Tundra. I still have to get used to my New Rates. Setup: -Armattan Chameleon Frame -Rotor Riot Hypetrain Motors -DYS Aria escs -Runcam Split -Matek AIO -TBS Unify Race -Dalprop T5040C -Horus X10s -Crossfire Micro TX Nano RX -Fatshark HD3 Instagramm: ankeleti Musik: ua-cam.com/video/-K_YSjqKgvQ/v-de...
Wilder Kaiser Winter Dream
Переглядів 1006 років тому
Incredible scenery and weather but unfortunately Spektrum let me down so i didn´t get much footage. Setup: -Armattan Chameleon Frame -Rotor Riot Hypetrain Motors -DYS Aria escs -Runcam Split -Matek AIO -TBS Unify Race -Dalprop T5040C -Spektrum SPM4649T&DX7s -Fatshark HD3 Instagramm: ankeleti Musik: ua-cam.com/video/LHFXQ7Y2cos/v-deo.html
Streuobstwiesen Freestyle
Переглядів 1217 років тому
Just a view clips from last autumn. Setup: -Armattan Chameleon Frame -Rotor Riot Hypetrain Motors -DYS Aria escs -Runcam Split -Matek AIO -TBS Unify Race -Dalprop T5040C -Spektrum SPM4649T&DX7s -Fatshark HD3 Instagramm: ankeleti Musik: ua-cam.com/users/joakimkarud
I took my drone to an indoor racetrack
Переглядів 1327 років тому
I flew my drone with my friends at a lokal indoor racetrack. I hope you enjoy it as much as i did. Every constructive criticism is welcome. Setup: -Armattan Chameleon Frame -Rotor Riot Hypetrain Motors -DYS Aria escs -Runcam Split -Matek AIO -TBS Unify Race -Spektrum SPM4649T Musik: ua-cam.com/channels/HEioEoqyFPsOiW8CepDaYg.html ua-cam.com/users/joakimkarud
I am milling aluminium every day - and if i see your chips, i can only laughing. thats not milling ^^ when i see, that your tool is dancing on the part, instead of cutting. u should fix a few things ^^
I notice 5083 feels softer than 6061 when CNCing. You need to take it easy with DOC and STEPOVER compared to 6061. Notice the side hole edges are burred. You tend not to get that with 6061.... I find I get more aluminium stuck to the endmill (carbide) compared to 6061 dry cut.
Good job, What is this vice that you are using?
Thank you. It is a 88mm precision vise from Paulimot.
Wow , amazing .. can i know your cnc ?
Thx, it is a self developed CNC Router build by myself.
@@tiredtimfpv5356 could you do a in depth video about the design? I would be very interested
Hello, What kind and size are X, Y, Z axis?
The travels are (XYZ): 500mm, 550mm, 150mm
@@tiredtimfpv5356 I meant diameter of ball screw
@@ХристоАврамов-ф2х 1605 on X and Y Axis and 1204 on the Z Axis
@@tiredtimfpv5356 thank you very much
I love to watch its . It’s so satisfying:)
Interesting mill bit, can I ask what it is?
It is a relatively cheap DLC coated 6mm three flute endmill from a big chinese shop
nice, da nutzt du ja schon die leistungsgrenze aus :-)
impressive.
Woowwww it seems so good.... Which Spindle are you using actually I am planning to build one. I am sure I can but not sure about the Spindle that can work with Aluminium and MS
Thank you🙈 I am using a watercooled 800w chinese Spindle. I milled steel once but with very low speeds and feeds. I wouldn't use this spindle if i would mill steel more often.
@@tiredtimfpv5356 Thanks for replying. What was the problem with steel, the structure of machine or Spindle?
hey tim sag mal was sind das für führungen 15er? rexroth, hiwin? Was für eine CNC Steuerung hast du`(also welches breakoutboard, treiber, software usw)?
Hi, das sind billige Hiwin HGR 20 Nachbauten von ebay. Als Steuerung nutze ich den Estlcam Klemmen Adapter mit normalen Nema 23 Steppern und DM542 Endstufen. Programmiert wird mit dem Fusion 360 Cam Modul.
@@tiredtimfpv5356 What kind of tolerances are you holding with the Ebay rails? You mentioned you are maxing out the spindle already, so I think you must have done a great job on the frame. Would be great with a quick of overview of it at some time.
You got lucky your part moved on you 😥
Why? The vise was tightend properly.
@@tiredtimfpv5356 sorry man I thought the part moved but the whole camera is shaking. It looks like your machining was ok however I would of done a slower helical plunge into the work at first.
What are feeds and speeds? It looks awesome 🤔👍
Its a 6mm DLC coated 3 flute end mill at 24 000 rpm. The feed rate was 2500 mm/min for roughing and 1500mm/min for finishing. The max. Axial depth of cut was 10mm with 1mm radial depth of cut.
Yes, it would be great to see more about your machine. From the results it looks like you did good job. I'm very pleased to see that you can do that with an 800 Watt spindle. I wanted to use 800 Watt but I was concerned it was not sufficient for cutting aluminum at a decent rate. (for my needs)
Thank you. A bigger spindle is probably a lot better at drilling too. I already got to the limit and stalled my 800W spindle in 7075 with 12mm axial depth of cut and 1,2mm radial depth of cut. I probably have to upgrade in the future 😂
What size spindle do you have?
Its a watercooled chinese 800W high frequency spindle
Please do a review of your cnc
chegger wo bleibsch ? willsch mal wiedr a viedeo hochlada ?
von was denn....flieg nemme so oft
Awesome spot and very cool edit. The mix of the freestyle and the plane chase is really neat :-)
erst mal disliken
Nice Chegger
Gerade enddeckt und gleich gesubbed :) Der spot ist ja traumhaft
Vielen Dank, ja der Spot ist echt geil
Sweet follow footage!
Thank you m8
war echt ein super Tag Jungs, Danke nochmal!!
ja war geil müssen wir mal wieder machen
schöner spot
nice one ! subbed !
nice ;) wir müssen echt mal wieder zsm fliegen :D
Auf jeden Fall
Laaaangsamer :D War echt genial ;)