Відео

Hello yes the battery can be used. But you need a BMS for the battery it's a 6S 24v battery. You need a BMS for 6 Cell battery. I think the cell's are quite good.

@RahmatullahRezai Thank you! They are going to send me a new mainboard and I'll try and swap that out first and then if that doesn't work, I'll get a BMS and try and at least make a 24v system out of it. Like you said, those are good cells, worth using them for something!

Hi. I didn't film when I opened it. But it's not too difficult. You need to use a plastic tool to open it. Don't use metal because metal will break the plastic.

Yes. But you can try to make a battery pack yourself. If you have the tools and spare batteries.

Sorry to hear that. It's super bad quality. And the company is a joke. Because it's dangerous to open it. The customer should not disassemble the power station. Risk of high voltage. I guess I will never buy from the company again.

Ok I will do that. Thanks for the interest But it's and old alloowers power station. There's many videos on UA-cam

Sorry for the late reply. I will upload it for you.

Hello the size of the Dash cam are 3.7cm x 6cm x9cm.

Black lcd screen how i can fix it

@@abduilrahmanabumostafa4753 have you tried to open the dash cam ? Check if there's loose cable?

@@RahmatullahRezai can you give the contact number for asked

Hi. If you don't have Xiaomi devices it will only charge at 15w rate. Yes it does support but only at 50w rate.

hi. sorry for the late reply. I only recommend this if you can attach it securely to the dashboard. otherwise it will loosen.

Good job 😊

It's just a wireless charger. It doesn't have any batteries.

Yes. The power station are made of cheap components. They are the worst

What happened? Can you tell me?

@@RahmatullahRezai we felt a light electric burn, while it was solar charging and parallel a small fan on it. Then it was dead, no more charging solar or other.

It charges very fast. Xiaomi 12 pro takes about 45 min from 0% to 100%

Hello. The problem was with the battery cell. I kind of fixed. But do you have any problems with yours?

@@RahmatullahRezai No I don't have any problems with mine but I was shocked to see the poor build quality on the main board. What did you do to 'fix' the cell?

@@russoliver4101 I contact the Elechive. They told me to send the board back to China for inspection and repair. I had a 6 cell battery from a power bank that I used to test the board. The board was fine. After back and forth emails they agreed to send a new battery's cells. But they sent a defective battery . Because the new battery's balance cable was cutt off during the shipment. They told me to try to fix the cable. But it's not possible because the original cables were soldered with Lazer. Tried using multiple soldering iron. I even tried using a tab welding. It didn't stick to the aluminium tabs. I give up. Since the support team stopped answering my emails . They are the worst company. They don't care about their customers. I never heard of an electronic equipment company telling their customers to disassemble the dangerous equipment by themselves. I live in Norway. If I lived in the us I would sue them. The quality of the board is like a child's work. All the components are the lowest quality. I don't think you can find any cheaper quality components than what they used on Elechive. But I am working on a solution to fix the cables. I will probably make a video about it soon.

@@RahmatullahRezai I'm sorry to hear that and yes, it shows they aren't interested once they've made a sale and it's a big safety issue. Would a conductive paste be able to make the connections, together with a non-conductive 'clamp' to attach the balancing lead? I would be interested to see a follow-up video if you can do one. All the best, Russ

@@russoliver4101 thank you. Yes I will make a video. It would be easier if there were any room to work. There's almost no free room. Because of the negative other battery terminals. I think it's 4mm in between the. I hope u understand what I am trying to explain. I will make a video then you will understand me 😊

Hello yes the battery cells are bad. Do you have problems with yours?

@@RahmatullahRezai Could you share how did you fixed your unit?Thanks for sharing its disassembly, great video!

@@NelsonAntunes-kf5un hello good day. The battery pack was the problem. You need to replace the battery pack.

@@RahmatullahRezai thanks! Did you built a new pack or where did you sourced? Having a issue with mine... suppose battery pack is gone too...

@@NelsonAntunes-kf5un you can contact the zero breeze. Maybe they will help you. If not you can build it. It's a 6 cell battery. But if the battery cells are expensive it's not worth the money.

Thank you

Yes, let's ban all French and German youtube channels too. Totally agree.

It only supports 50 watts if it's used with Xiaomi phones that support fast wireless charging. It doesn't charge other phones at 50 W rate. Only Xiaomi. I only use the Xiaomi original silicone case. I have an old Xiaomi 12 pro. Yes the 100w baseus is a good choice.

Hello. I bought it on Aliexpress. here is the link to the store. a.aliexpress.com/_EJ7Fbqb

Yes this is a good one.

Sorry for late reply. Yes I will definitely make a video

Hello friend sorry for the late reply. Yes you can . But only support 15w

​@@RahmatullahRezai Why only 15W when Edge 30 Ultra phone supports 50W wireless charging?

@@VaroomKrish because Motorola doesn't support Xiaomi fast charging technology. Motorola does support Qi2 wireless quick charge. But it's not as fast as Xiaomi. I think it will change faster if you get a Motorola or Lenovo wireless charger.

Ok thanks for the video review and quick reply! ​@@RahmatullahRezai

Yes . You can replace it.

Hi. Sad to hear that . But I think you should wait. Because the R4000 is more complicated than this one. I don't trust this brand. So don't be surprised if they don't reply to you. At the end if they didn't answer you. You can carefully open it. I am sure you can retrofit some other board that allows you to charge the batteries. Keep me posted if I can be of any help to you. Good luck 🤞

@@RahmatullahRezai thank you, will keep you posted...

Yes there's a very low fan sound. It sounds like white noise.

Sorry for late reply. It's definitely the BMS. But remember it's 3s BMS. It's 3 cells in series'. The voltage should not be 14 volts. It's 3.7 volt per cell Wich is 11.1 volt in total.

Yes you are absolutely correct. It's a pure sine wave. But it has a lot of distortion. 7ts Pure sine but not a good one :).

Allpowers are using cheap quality products. Not recommended.

Sorry for late reply. Have you tried to charge using USB c port ?

@@RahmatullahRezai no power from the USB C port

@@mnhim001 do you want med to make another video about the usb port?

Ok. I will make a video about the usb port.

Hello sorry for late reply. Do you have the us version? You want 220 volt out of it ?:)

Sorry for the late reply. I am not sure. I can check it out for you.

Just be carefu,l the 21700 inside the powerbanks are not rated for High discharge.

Hello. Iam going to check it out and find a solution to fix your unit.

Doesn't have any fuse at all ? Could you upload a picture?

@@RahmatullahRezai Can't seem to upload a picture on here. If i take the fuse cover off the front there is nothing there, only the circuit board.When AC is selected one of the fans stays on all the time

@@wand8626 do you know the model number? Could you check if you can disassemble it?

@@RahmatullahRezai it's the S300 V2.0 ( AP SS-005) il try and take it apart and show pictures

Did you resolve this .. I have the same model that shuts down when unplugged

Sorry for kate reply. I will make another video soon. Then i will go over every components.

@@stevo2992sorry to hear that. Have you checked the fuse? There are 2 fuses one is for DC output and one is for the Ac.

Hello sorry late replay. If you still have the problem let me know i will make a video

@@RahmatullahRezai yes, I still have the problem. It won't charge through any port.

@@RahmatullahRezai I have the same problem😢. Can you help please 🥺?

@@RahmatullahRezai I have the same issue - can you guide or help what can be done? all charging ports don't work.

@@9829246959 sorry for not posting any video. Can you describe your problem? Then i will try my best to find a solution.

Hello sorry for late reply. The battery are connected in series. There's 3s configuration. It's 11.1 volt.

Hello. The power station only charging? There is 3 buttons on the front side. No one is working?

@@RahmatullahRezai thank you for your reply, yes, AC and DC buttons are not working, when I press on them they are lighting for 20 seconds and then switching off by themselves, WiFi button seems to be ok and torch buttons are working.

@@RahmatullahRezai I have changed the fuses and now DC button started to work but AC still not working, any idea what to do?

Hello i will be back from vacation next week. I will check it for you. Maybe quick fix. But not sure. I will let you know when I get home. Have a wonderful day (night)

@@RahmatullahRezai Hi, DC button is not working again so I decided to buy another generator as this one is 3 years old and seems to reach the end of its life, but thank you anyway, best wishes

Hi. I will check it for you. Sorry for late answer. I am on vacation. I will let you know when I get back. Hva a wonderful day.

Hi. So sorry I have not released any videos. I will release more videos soon. When I get home from vacation. Have a wonderful day

Hello sorry for late reply. You can remove the fuses there is 2 of them in the front of the device. If that didn't work you have to disassemble the unit. Hope it helps