Відео

This was a GREAT video for helping me troubleshoot my Ninebot. I still dont know now what the problem is.. The motor or the motor cable. What is an easy way to test it? And if it is the motor, how do i know what cable? Everything is covered in that white silicone sealant

Your Killing Me Smalls! You tend to go down too many rabbit holes and get off topic, That being said, once you finally got around to it your method of testing helped me identify a bad controller. so thanks for the video! and have a great day!

O.L is Open Loop.

What if your issue is with the blue phase wire. When I unplug the blue phase wire the scooter runs, when the blue phase wire is plugged, the wheel stiffens up and rotate and stops. Sticking.

Hi! I have this issue, I have a ninebot max g30lp and the cable insulation where the motor and controller cables meet melted. I bought a replacement motor from Segway but I didn't realize the cables are the circular metal ring at then end. I was told on reddit that those cables can be clipped and bullet connectors connected. I am a university student so I don't have tools and much knowledge about fixing this properly. There is also no place where I can send my scooter to be serviced locally. Do you have any tutorials or product information on which tools I should get for this job and also how to complete the fix? I would greatly appreciate the help!

Very informative, thanks!

Too much talking go straight to the point please

Drone! Drone ! Get to the point .

Let us know how it goes. Nice idea.

Most boring... couldn't be! You dont talk to rocks...my god...speak less and say things with meaning

Buddy stop talking and get on with it you got ADHD obviously cuz you keep going on about other things and what you're trying to show us show us what you're trying to show us you're giving way too much information that we don't need

Job well done thanks

Kapton tape is the word you were searching for...😊

Fast forward to the 4 minute mark as I talk about a motor.

Why ramble like that. People click on because if what ur title says not to hear ramblings

Stfu already and do the damn test

You have to first paired with the controller it doesn't comes ready, I also had that issue it can take multiple tries before you get it to work I received 3 nfc and 3 of them do work but you need to paired to the scooter, there's a video on UA-cam of how to can do that, on my you need to turn one the scooter out the 1500 password and then quickly press mode button and up button at the same time, the little lock will start to blink once started to blinks put one of the nfc key touching the the center of the finger throttle keep the nfc in place until you see the lock stop blinking and then you press the m button until the screen goes to home that's when the nfc got configured to the scooter

I'm sorry about the major delay in replying , so this is Paul, and I do have a multi meter now and I'm not sure if there's a model name but the brand is called " speedrid " I check everything , but you said even though the battery reads correctly that still doesn't mean that it good or enough to power up the scooter. It's Two years old but I've only used it maybe 15 times never ran it down to empty the problem is it don't power up . I did Pierce a couple wires putting the hub cover cap back on the front wheel motor tire fix road it once and pulling into the driveway it stopped completely. Have any ideas? Thank you!

hello, good afternoon. I have a question, I have a ninebot g30 max scoter, the problem is the following: it starts well, you turn it into gear and it stays on, you have to turn off the scooter if it doesn't stay spinning. I already bought the new accelerator and it's still the same. Thank you very much in advance, I hope you can help me.

i have 4 different controllers that, each one at a different time, half broke with a very strange problem. One of them worked perfectly for 8 months, another for only 2 weeks. One is 100W, another is 500W, and i have a 350W and a big 3000W. And they are doing the same on 3 different engines, but these 3 engine works fine with a new 14$ cheap controller. Now my 4 controllers are all doing the same strange thing: they work fine to keep speed on flat or downhill. The faster the wheel turn, the more effort they can go while still working. But specially at low speed, if i put more "effort" on the engine, by trying to accelerate, or if i go uphill, they cause the engine to make a strange sharp noise, and go no power (free-wheel), and if i don't let go of the accelerator, then these controllers goes into safety mode and turn off. I can't find anything about that on internet. But my 4 totally different controllers are doing this, it's so strange. Using them with or without the hall sensor does not change anything. And my new 14$ controller works perfectly on all my engine without hall sensors connected. if anyone has any clue or any internet link to the same problem, that would be much appreciated.

I have been watching your UA-cam which are great, and was hoping id be able to diagnose my son's iscooter, but am still struggling. About a year ago now, my son complained about his iscooter. upon inspection, the electronic dashboard would light up and immediately turn back off when switching on. I would attempt to turn it on again, but nothing would happen until approx 5 minutes later when it would do the same again. I attempted to charge the battery, but the charger would flash, indicating that it was not charging. I disconnected all wires, ran out of time and completely forgot about it until I came across your videos. Since then, I had lost the charger but found a compatible one that just needed the charging port plug to be changed. I connected the battery to the charging port of the scooter, and the battery started charging until fully charged. After it was charged, I removed the charger and reconnected all the other wires, and it all turned on and worked perfectly. Then today, I went to put it all back together, so I placed the battery and controller back into the scooter and thought I'd double-check that everything was working one last time before I continued. I turned the iscooter on, and history repeated itself where the display would light up and immediately turn off. Any help would be greatly appreciated. Many thanks

Hello dear sir baizifu conversion kit brushless kit moto 😊😅

Hello dear sir one of the moto sensor wire the yellow one 😊😅

I now have a multi meter where do I start considering it's 36v battery and doesn't power up I've only rode this thing about 15- 17 hours total in a eight month period.

9:02 Western mountain. My scooter read E1. I got into the motor saw a loose wire fix it it cleared the problem and I took it out ran great the second time I tried to ride it , it powered down while riding and now I have zero power. You have any ideas? And I'm getting a voltage thing tomorrow.

Great video, but I like your key board more

Thank you very helpful

OKI hope you caught that butt where it said Homestead. It was supposed to say ohm setting.

I like how you explain that it makes sense to someone who doesn't necessarily know exactly what they're looking at. Thank you, I have one question. Because my multimeter is different than yours. And the Homestead doesn't have just one setting it has. 2m 2ook 20k 2k 200 And one that looks sort of like a sideways Wi-Fi icon on your phone. Since I don't really understand a lot of tricks to really great.I have one question.Which one of those settings is appropriate for the task ? Cause I don't actually understand what those settings mean. And this pulcivo multimeter. Well, the people that solve it cheat doubt and it did not come with an instruction manual.

How do you know if the scooter slows down then shuts off if its the battery or controller? Thanks

Hi 😊 I have watched all your videos very helpful I have come to the conclusion after checking the resistance on the wires you said to check it's open circuit no good any where. Also since it happened the battery charger goes red green and the display beeps while charging the display goes in and out. Can you help me find a circuit board for my G30LP scooter thanks ❤

Have you ever had the e10 error on a mantis?