Відео

@melted_cheetah Thanks, yeah the o3 is not so great in the low light situations. Im seeing positive news about o4 low light and capabilities. As soon as they start shipping im grab 2. 👏🫡

@flat-earther Hey 👋 Thanks for checking it out 💯 I cant get enough of these fpv flights. Lol

@salisburyrc thanks pilot! You right. 😂 did you get snow at your place? 🥶

@ No snow this far south. Just cold.

@salisburyrc oh That makes sense. Hopefully it all warms up for both of us soon here in the next month or so.

@bloodflow82 😆👌 yeah cracks me up, thanks. it was chilly around 29⁰f most of the day. I really just wanted to get up and see from above quick and get back warmed up. ❄️

@itzjoeylo4501 Thanks pilot! It was a cold and fun flight out there on the water. 👍

@salisburyrc 👋Thank you Pilot! It did turn out better than i expected.😅 I cant wait to get out again when it warms up. 🫡 currently sick and weather cold.

@capitancairlblandford5785 hey pilot, so if you want to get a speedybee fc with combination spektrum radio, so you can buy one of many spektrum receivers that are capable of connecting to the FC through the Sbus port or Srxl2 or serial receiver.

Use an SRXL2 capable receiver like a Spektrum 4651T. The INAV documentation will have the how-to’s for the set up, but it isn’t very complicated.

@demetrimorales8996 hey pilot, thanks for checking into it, I would say most 1meter and larger scale can handle the o3 air unit. This was a 1.2m p51 from horizon hobby. I had about 3 or 4 of the same model, and yes they did great with the o3. 🫡

@ so I would imagine it would be too much weight with all the components installed for a 750mm scale, incase I end up getting a less expensive scale/ plane

@demetrimorales8996 exactly, I would say the 750mm range is certainly capable with a smaller camera system. Maybe an analog tiny whoop drone camera system. But yes, the o3 unit is a little bulky for the smaller models to carry.

@ how were you able to push record without a DJI controller cause I have the o3 air unit and the controller 3 fpv controller for avata 2, so since I’ll have a separate set up on a scale airplane how would I know to record when I just have my goggles connected to air unit.

So in this video i was just powering the air unit with balance connector i soldered on the other end comming from the air unit. Then the goggles v2 i would bind them to the air unit and then i can see things like the dji overlay showing the air unit mbps and the record time. But i just press rec button on the goggles and make sure setting in the air unit are to record both air unit and goggles. Then just record and fly and the video will record on both air unit and goggles. Although i was not arming the air unit. It had to stay close range with that old setup. 😅

@salisburyrc Thanks Pilot!👏yeah, It was alot of fun, and always bring the plane with you, in case you get the chance to fly somewhere new. ✅️ I love flying new locations when i can.

@FreeEditsForYou Awesome! I hope it works great ill like to see that video asap✅️. I may end up getting one online from rctoys. Its a nice festure to have in cockpit. ✅️🫡

@TNT_FPV yessir, you definitely can print a whole plane if you want to. ive printed fpv gimbles and tons of plane parts over the past year . I use tinkercad for 3d modeling. Its free and it can export in stl. You will enjoy the 3d printing hobby. ✅️

@TNT_FPV Hey bro, thanks. The jets are easier than warbirds, turns out. I been enjoying the ease of flying and when the weather is good im trying to get out. I been sick about 5 weeks and then got some metal in my eye. So im just taking these things 1 problem at a time. 😅✅️ keep posting aswell, ill be popping in to check on the flights aswell. ✈️ 🫡

Thanks Bro, I would like to fly fpv with you one day. If we were closer i would let you try them out on your setup. 👏 And yes if you wanna change up to G3s, Ill tell you its night and day difference. the FOV is really not noticeable, unless you fly all day every day you may notice something that i don't. But I feel like i see more, due to the screen being alittle sharper picture and i can see all edges of screen clearly. The goggles 3 will not disappoint in comfort either as they are much more comfy imo.

@ That’s really good to hear. I know you liked your V2 goggles. I’ll probably pull the trigger soon on them since you recommend them. I agree. We need to figure a way to meet up some time and fly.

@salisburyrc yeah that would be awesome to get some tips off you aswell. 🫡 I think you will be impressed with the g3. I also like the controls are almost identical. Including video pass thru to see the field outside without pulling them off. 🫡

@@Streetreaper89 You sold me. I ordered the Goggles 3 and a new Tally-Ho head tracker to go on it. Merry Christmas to me. 🤣

@salisburyrc thats awesome! Congrats i cant wait to see your videos with the g3s its nice that the osd is recorded to the goggles aswell.

Thanks Pilot 🫡 your right ✅️ haha I actually have yet to install them because, when i transport the model i am afraid the winglet will get damaged or fall off, also the canopy cracked and was un useable.

@ I actually haven’t flown my ASW 28 yet. Just every time I try to move it with the wings on, the winglets get caught on something. It’s really great to see how well the plane flies. I’m using 1.3 GHz analog FPV, and I have my camera mounted in the same position on the tail. I can’t wait to fly it.

@joslinnick oh nice, well i hope you can maiden the asw soon. thats a be great view. I really enjoy the asw even on windy days its real fun to surf around. 👏

@salisburyrc Thanks Pilot! Yeah, I love that area aswell and the riverwalk is nice. Im about an hour half south, and yes the sickness is getting better day by day by day. Lolol seems like forever, Itching to fly.

Hey Pilot! Same here buddy! I have been sick past 2 weeks unfortunately. I haven't been feeling good. but things will turn around here soon. I've been spending time fixing my HT pan servo drift issue also about to maiden a Cirrus sr22t eflite with Timber floats i finally finished up building. looking foward to some water action again. How about you? everything been good?

Thanks for mention that. I speed up the video around 4 to 6x in most of the clips. But it will otherwise be around 30min video. But i may upload a full length video now you mention that. 👏✅️🫡

@ cool I will be looking forward to that

@ what printer do you have?

@Jmnp08 Thanks! Yeah, you definitely should do it if you enjoy planes. its alot of fun and expensive, although if you dont already fly rc planes, it's all about learning to fly first. Then you can add a camera and goggles and make it even more fun. Although even small planes are expensive if you crash them you can download Realflight simulator on pc and practice flying rc planes. 👏🫡

@@zfrozen-3d thanks ❤️

@salisburyrc Thank you, you been doing good stuff my man, I just been try to keep my thumbs sharp. 😅👏 ill be back in the honda in the next couple of months, even tho i love the jeep, i dont like driving it further than across town, It's like 11mpg 🤦‍♂️. I loaned honda to my stepmom since her engine went out.

@@Streetreaper89 Thanks! I understand about the Jeeps. Its all I drive. 😆

@salisburyrc Oh for sure, they are alot of fun though! 👏✅️

@blacksheep933 thank you pilot🫡

@ my Dji air unit 03 arrives today, it’s going in my turbo timber to learn on. Than into my Hangar 9 RV 4

@@blacksheep933 oh shoot, that's awesome. well i think you will be hooked. I really started on an apprentice 1.2 and then I was addicted ever since. lol

@salisburysm Thanks Pilot, i wish his voice was on capcut. 😂

@kwboost Thanks bro, its definitely a blast. 👏🤙

@mikechappell2377 Thank you for joining! 👏👏 We all had a great time flying.

@tonyyimbo thanks bro. Ive got around 80 flights on it and its got soo much easier now.

@Whip_Productions thanks for checking it out, the timber evo umx is gonna be too small to run the dji o3 but maybe a smaller analog setup. I actually love the 1.5m timber evo. But then, go grab any of your favorite 1-meter scale size plane or larger for best performance and fun and connect up to dji o3 and goggles. Some wiring and modification are required to install the camera and components in a mount of some kind but its all good fun learning along the way.

@@Streetreaper89 so are you saying that the battery is too small to run the o3 air unit or it doesn’t have enough thrust to carry it?

@Whip_Productions yes i think both of those situations is going be cut it close. The plane may not fit an o3 air unit on it without compromising the ability to fly and also dont quote me, the o3 input power required may be around 8 or 9v to 25v

@@Streetreaper89 ok thank you for your advice

@Whip_Productions anytime, 🫡 you will definitely enjoy flying fpv planes. I also play in the Realflight evolution simulator game on Steam. I can fly most of my planes in the simulator before i buy them or try them first. ✅️

@celaleddinozer144 Hello Pilot, great to hear you are interested in fpv. Its a great experience to add to your skills. You may want to try out the Dji system or theres many other good systems like hd zero, walksnail and runcam. I dont know what setup would be easiest. This setup i used Inav software which is open source free and theres lots of video help from other people. But i would say you may enjoy the setup like Motionsic or Fpvdogfights.com which may allow you to use your current radio and reciver system. 👏 cant wait to see when you switch to fpv.

@Kat-hi5ti Yeah, lockheed martin design. 🫡

@Vadderr 👏😅 I got hooked after seeing someone fly rc jet locally. Its a fun hobby if you like to tinker and work on your models often. 🫡

@Pretend_pilotFPV Thanks bro, thing is on rails just perfect for speed or slow cruise with its ultra lightweight design.👏👌

Hey, Thanks for checking it out, yes check out @0to400DroneServices channel or tiktok i belive he has some videos somewhere of his build. its really similar to my f22 90mm except the f18 model is a 70mm edf. ill update my specs into the description for you. 🤙🤙

Nice flying! We have some F-22 FPV electronic tutorials! ua-cam.com/video/62z3Cl9MA04/v-deo.html

@edwardpetersen3437 🫡 Thanks for checking it out, its alot of fun and you will enjoy it.👏👏

@mizz9841 Thanks pilot 🫡 this plane is sorta floaty, so it's much more ease of stress than the f16. Also about half weight of the v1 f16. And yes, i would love to keep flying at ama location, unfortunately i was a part of a club, and both areas i flew did not allow Fpv without a spotter per ama rules, even tho im ama member i dont have any spotter unless i hire someone. There is permission in some of the spots i fly like this location. If i like the location, I'll do my best to make sure i have full permission to fly. 👏🫡🫡

@@Streetreaper89 you gonna make me buy that bird - it's so expensive but I LOVE EVERYTHING I'm hearing about it... Anything you can share about this bird? I love floaty jets as I can do so much with it... How's the power on it?

@mizz9841 Yeah, if you havent got one yet, now is the time. 💯I HIGHLY recommend it bc of how much control you have and the gear are great. I haven't done grass takeoff, but you can also land belly in soft grass and no scratches or damage. Also, i upgraded the motor and fan and found no significant difference. I really like the f22 i may grab a 2nd one here soon make one 12s or v2 F16 model. Ive had only a few rough landings 😅 and it was actually no problem for the gear on the 22. Im satified already in the quality. Now i have had around 67 flights with 6000 mah zee battery. Today i flew 5 packs, i collected 7 flights yesterday ,and 7 day before that. Its addicting to fly this model. 🤣😆

@@Streetreaper89 wow thank you for this helpful information. Salute

@NathanDog-ns2mx Thank you bro🤙🤙👏👏 🫡

@Mr-crimson776 Thanks pilot! Yeah you did great on the futura, the Day 2 video is comming soon. 👏🤙

@swellmel771 Thank you. Glad you enjoyed that clip🫡

@lamarwilson8608 😅😅 And here i thought it was a fire 🔥 🤣🤣

@M4rkmcc21 🤣 you right i always call it motion rc planes. Lol

@@M4rkmcc21 thanks i went and changed the title also 🫡👏

@RECK_Adventures 😅 yesir, you are correct!. I was using the sliders bc yes i try to aim my patch antenna at the plane. But closer flights i turn my head. Lol 👏

@salisburysm thanks bro. Yeah this lil plane using a 3200mah 4s 50c i get about 8to 10min, if i slow down and less wind i could maybe reach 15mins if i run the battery down around 15%

@@Streetreaper89 Nice!

@antonsokol4008 hey, best way is to use a flight controller to plug the camera directly in. But, in these days i was using a o3 unit, i soldered the black and red power ground wires to a 4s balance lead extension cable ordered from amazon, then plug the other end of the extension into the battery balance lead and the camera will power on. Its still limited to short range half mile without using the flight controller.