Відео

@joaobastistafereira45 Muito obrigado :)!

Thank you! I don’t usually use a program-most of the time, I use pencil and paper to draw the pattern. But if I have more than one idea, I like to compare them to see which looks better. For example, I originally planned a pixelated wave pattern with three different wood tones for this video, but after checking it in the program, it didn’t look as good as I imagined. That’s why I went with this final design. For the comparison, I actually used PowerPoint 😅.

@Xanderbelle Yeah, they’re basically just 4-way pressure clamps. That’s the search term you want to use. When I first saw them in another video, I spent a lot of time figuring out what they were called, so hopefully, this saves you the trouble! They’re great because you can apply pressure from the sides while simultaneously preventing the strips from slipping vertically. Super useful for keeping everything in place during glue-ups!

Thanks :). I made it from 4 pieces of aluminum profile 30x90 L B Type Slot 8, and they are connected in 4 places with 90-degree internal brackets to secure the frame and maintain its perpendicularity. This allows it to adjust to any rectangle, depending on the size of the board.

@@stammherz Thank you! Do you mind telling me where you get the brackets from? I’m not sure I’m seeing the right ones

@willhaberkorn2356 Yes, of course! Here is the link to the correct brackets: Yeepeo 8 × T-Nut Innenwinkel 3030... www.amazon.de/dp/B0C7L52RBL?ref=ppx_pop_mob_ap_share Feel free to check them out!

That’s a valuable tip because I was also trying to figure out the reason for the burn marks. I thought it might be due to a dull blade or something like that, but I’ll definitely try your advice. Thanks again!

You bet! Love the video.

Thanks so much! Glad you enjoyed the video :)

Thanks so much! I really appreciate you always taking the time to comment on my work.

@@stammherz I know that it helps your channel to leave a 'like' and a comment. I do it because you very much deserve it. Those little tidbits that you attached to make your glue-up right and tight was going the extra mile. I liked that. Take care.

I'm truly delighted that you noticed this small detail! It means a lot to me, and I appreciate knowing it could inspire others and be helpful to viewers by sharing small tips that could make a big difference in their projects. Thanks so much for your kind words!

Dziękuję bardzo! Cieszę się, że podobało Ci się wideo!

Thanks! Glad the board makes up for the dust storm! :)

Yes, I know! 😄 Dust flying over the table saw just adds to the workshop vibe, right? 😎

Which clamps do you mean, 0:45 or 5:30?

​@stammherz 0.45. Great work btw!

@slackjaw4817 Thank you! I'm glad you liked the video. The clamps are homemade, but you can search online for '4-way pressure clamps.' Here’s a link where you can find the accessories to build them with minimal effort: www.ebay.com/itm/405024609202?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9jhmv___rgi&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY

Спасибо

Thanks :)

Thank you! That’s an interesting suggestion. Reversing the two woods could definitely create a different look. I’ll give it a try in one of the upcoming projects to see how the contrast and overall design turn out. Thanks for the idea!

😅😅

Thank you 🙏

Purpleheart and Ash

Appreciate the thumbs ups! Glad you liked it :)

Thank you so much for your kind words! I really appreciate it, and your comment motivates me even more to keep pushing and improving with each project. I’m glad the work resonates with you!

Thanks a lot! Glad you noticed the homemade clamps - they’ve proven to be super useful. Glad you enjoyed the video!

Good eye! Glad you noticed! That’s awesome! It’s my favorite machine too. It’s the Hammer A3 41 with the spiral cutterblock, and it’s been a real game-changer in my workshop! www.felder-group.com/en-us/products/jointer-planers-jointers-planers-c1948/jointer-a3-41a-p3148

@@stammherz I really wish it wasn't a starting price of $8770AUD though. Maybe one day...

I know the feeling! It took me some time before I could get mine too. Keep the dream alive :)

Thank you so much! Glad you enjoyed it :)

Appreciate the feedback! Was there anything specific you think I should add to make it more detailed?

@@stammherz no, it is a chopping board.... they rank only just above river tables in the ' done to death' on UA-cam. Not a personal slight at all it's just the thought of someone who has made high-end furniture for 30+ years but still has a passion for woodworking...

Thanks for the perspective! I get it-chopping boards are everywhere. For me, it’s about sharing the process and passion, no matter the project. Appreciate your experience!

Muito obrigado pelo seu ótimo feedback! O seu apoio realmente significa muito para mim e me motiva a continuar criando mais conteúdos como este. Fico feliz que tenha gostado do ritmo acelerado!

Thank you so much for subscribing and for your support! I’m really happy you enjoyed the chopping board and clamp setup. Your encouragement means a lot, and I’m excited to keep bringing more quality content as the channel grows!

Thank you for your comment :). I use Mirka Deros II

Thanks for the suggestion! I'll make sure to include a still frame of the top in future videos so you can clearly see the grain and final product. Appreciate the feedback!

Thank you so much! The light-colored wood is actually white ash, while the darker one is walnut, and the other is cherry. Glad you liked the combination!

@@stammherz Thanks.

Thanks for the comment! On the positive side, the leftover you saw in the video will be used for a new project-minimum goes to waste! Cheers! :)

Thanks! I really appreciate your positive feedback :)

Thank you! I truly appreciate your kind feedback :)

Thank you :)

Thanks a lot, glad you liked it :)

Cieszę się, że ci się podobało :)

Thank you! I’m glad you like it. You can check out my shops in the description for a variety of different designs :)

Hello! I used ash and walnut for this project.

Do you mean the one at 00:40 or 05:35?

00:40. I see what you have on the second, I am just still looking for, I think it is aluminum side paneling of some sort.

You can only make them yourself. They're customized, and I haven't seen anything like them on the market, or they're too expensive. They automatically hold the wood down while pressing, preventing vertical slippage. This video would definitely help you: ua-cam.com/video/y_EMBOYlN54/v-deo.html

Thank you! Glad you enjoyed it, and appreciate the subscription :)

Danke dir! Freut mich, dass dir das Brett und das neue Logo zusagen :)

Glad you like it!

Thanks :)

If you’re referring to the setup at 3:09, I constructed it using 40x80 mm slot 8 aluminum profiles and Bessey GTR30B6 clamps. Link for clamps: www.amazon.com/s?k=Bessey+GTR30B6+clamps

Thanks! So glad you liked the colors, the dark wood turned out great! And haha, the ‘carrot king’ was a fun little detail we threw in there!

Vielen Dank für das tolle Feedback! Es ist schön zu hören, dass das Brett deinen Vorstellungen entspricht. Ich hoffe, es wird gut in deiner Küche zur Geltung kommen.

Thank you for your feedback. I used boiled linseed oil for the finishing.

Thank you for pointing this out. Do you mean the walnut board at 00:19?

Danke Matthias :)

Thanks for your nice feedback. I built these using 40x80 mm slot 8 aluminum profiles and Bessey GTR30B6 clamps. Good luck with your projects :)

Thanks 😊