Mine is a PNP version that does not include the WingGuard gyro. The whole machine is highly finished when it leaves the factory. All electronic equipment has been installed in place. Except for the connecting rod of the full-motion horizontal tail, other connecting rods have been installed. And the length is adjusted appropriately. It only takes 15 minutes to install after you get it. It requires no glue and is very easy to install. The wings are installed using Feiyi's Quik 2 generation quick-release structure. Each wing only needs to press two switches to unlock, and field installation only takes 1 minute.
This aircraft uses the combat paint of F-22. The three-color camouflage spray paint is even, but it may be affected by the foam structure. Some foam shapes can still be seen, but with the real engraved structure and water on the upper surface, The transfer sticker has a very good texture when flying in the air. The retractable landing gear uses an all-metal structure, which is very strong, has a long shock absorber stroke and good support, and can withstand heavy landings.
In terms of flight performance, this aircraft is designed with a wing-body fusion lift body, so it can complete low-speed, large-angle maneuvers with medium and low throttle, and can fly in a perfect nose-wheel-raising attitude when landing. Paired with the 70mm ducted power of the powerful 6S battery, it can complete vertical climbs and other large-angle movements. In terms of overall flight performance, I think it is a relatively easy-to-fly type among modern fighter jets. However, due to its size, the wind reached level 4 on the day of the test flight, so shaking often occurred during flight. It was greatly affected by the wind at low speeds, but with ground effect or maintaining a certain speed, the overall flight feel was not affected.
In general, Feiyi's new 70-channel F-22 aircraft is an aircraft model that is easy to disassemble and assemble in the field, is moderate in size, and has certain real details. It also has excellent flight performance and good wind resistance. It is a It is a good choice for casual players who want to advance to ducting like real machine players or masters.
Brand: Freewing
Aircraft: F-22 Raptor
Power: 70mm EDF
Requires battery: 6S 3300-5000mAh 45C
Equipment used by Haozi:
@FrSkyRClive X20RS remote control, Gens New Avionics 6S 3700mAh 75C Lipo battery
我的是一架PNP配置不含飞翼卫士陀螺仪的版本，全机出厂完成度很高，所有的电子设备均已安装到位，除了全动平尾的连杆外，其他连杆已安装完毕，而且长度调整合适。到手后仅需15分钟即可安装完毕，0胶水装机，十分简便。机翼的安装使用了飞翼的快客2代快拆结构，每侧机翼仅需按动两个开关即可解锁，外场装机仅需1分钟。
这架飞机使用了F-22的作战涂装，三色迷彩喷漆均匀，但可能是收到泡沫结构的影响，仍能看出一些泡沫的形状，不过搭配上表面的像真刻线结构和水转印贴纸，空中飞行时的质感非常好。可收放的起落架使用了全金属的结构，非常粗壮，而且避震行程长，支撑力度好，可以抗的住重着陆。
飞行性能上，这架飞机为翼身融合的升力体设计，所以可以完成中低油门的低速大角度机动，并且在着陆时可以飞出完美的抬前轮姿态。搭配上强劲的6S电池的70mm涵道动力，可以完成垂直爬升等大角度动作。整体的飞行性能上，我觉得它在现代战斗机中属于比较好飞的类型。不过受其尺寸影响，试飞当天达到了4级风，所以飞行中经常出现晃动的情况，低速时受风影响较大，但有地效后或者是保持一定速度还是可以不影响整体飞行手感的。
总的来说飞翼这款70涵道的F-22新机，属于一架外场拆装简单、尺寸适中、有一定像真细节的航模，而且飞行性能出色，抗风性不错，是一款想进阶涵道像真机玩家或者高手休闲的不错选择。
品牌：飞翼模型
机型：F-22猛禽
动力：70mm涵道
需要电池：6S 3300-5000mAh 45C
昊子使用的设备：
睿思凯X20RS遥控器，格氏新航电6S 3700mAh 75C Lipo电池