Відео

@@adampye905 totally agree if we spend 8-9 hrs together per day we have to get along

@richardbusby7141 I'm OK with the products. My issue was colour matching, the camera said it was a match and when you sprayed it, it was different. They had their camera replaced while I was there, and the rep came out a few times. Nothing changed tho. I asked how to get the best out of visualise but it wasn't much better.

@Porphis-Group thank you, I really appreciate that. Your spray guns are amazing and I will be buying more, I really want to try the PRD 627 vs type. Keep up the good work 👏 👏👏

@MichaelNeiland to be completely honest I haven't heard many good things about ppg lol

@@sphdg thank you 👍

There were no colour chips at this shop, we were using the camera with the latest computer updates. The one visit modifier is T4900 there are videos about it on UA-cam. The grey shade on the car is the shade the computer suggested for the colour we were applying. Also I don't understand why I would seal anything as the correct primer shade was applied, it's just adding an extra step for no reason. In the UK we only put sealer on new panels. I have never seen anyone seal over primer?

@lutra7670 never lol. It was more of a thing at college but now we just follow the mixing ratio and is always good enough.

@glen4407 The paint can make colour matching better or worse. The reason I sing the praises of spies hecker and standox is the camera is really accurate, if it tells you it's good then it's good and I can trust it. Just saw your short. There are quite a lot of variants. Those last 3 looked much closer than the first 3

@@paulphillipspaintwork I always joke that the beep when the camera is done should say good luck. The paint rep just tells me I need to learn how to pick the right one. I use the one it says is the best. Global match is never good. I just wish they made color decks.

@glen4407 lol everyone said to me "just pick what you think is best" the problem was I didn't have time to make a spray out prior to painting so I didn't have a starting point. I.e it needs to be redder or bluer ect.

@JohnWD40TC02 thanks mate, yea it's a shame. It wasn't a bad place, but you would the we would all work together for the good of the team, but there was none of that there. I enjoy doing the voice overs that way but sometimes I forget that some people may be new to the channel and might be wanting to learn and I'm just rambling on about something else lol.

@JonathanCox94 thanks mate, I really appreciate that. I have found a good place, close to home and everyone is really friendly. Which is a massive plus. I prefer the tinted clear coat version of these colours. I completely get what you are saying. If you have to put a lot of base on like that, it's probably worth baking for 10 -15 mins before applying clear coat to try and avoid dye back. 👍

@robborobbo8174 who ever was priming the car had the responsibility to camera the car and then use the grey shade that was suggested so it should always be the correct grey shade. But I have heard guys the the gunman complaining that ppg doesn't always give the correct grey shade.

@sbr1160 that's bull sh*t man you don't need that at work. I always joke "what do I know, I've only been doing it for 20 years." And I do asked other people's opinions and for help if I need it. But sometimes they know best 🤣 I did get advice from a painter once who said "if they tell you to do something a certain way and you know it's wrong, just do it because it's their mistake. If you then do it your way and there is an issue for whatever reason it's your falt for not listening, so put the responsibility on them"

@@paulphillipspaintwork That painters advice was spot on, the reason I got laid off was the stupid carpenter was good friends of the boss, the boss even knew he was in the wrong haha so better of our and sane than in a job and ready to cause physical harm to a tosser.

@@sbr1160 🤣 did you find somewhere better to go? Things like that are usually a blessing in disguise

@@paulphillipspaintwork yeah opened a vape shop in Belgium, at that point I'd had enough of working as a welder in the UK thanks to Tom the twat haha

@sbr1160 that's awesome 👏👏👏 congratulations. I kinda want out of the trade, I started PainTeX selling paint products to painters using my knowledge of the trade. I'm not sure I can work for people lol. I've had enough bad bosses lol

@thistledewoutdoors3331 yea I totally agree mate sometimes you have to walk away.

@@thistledewoutdoors3331 totally agree

@thistledewoutdoors3331 yea I agree but 98% of spies hecker colours aren't an issue so in faster paint environments it allows the painter to just get on woth what he need sto do. 👍

1 and a half my a$$. It's a scam to get companies to use there crap. It's so thick it takes forever to dry. I never used solvent and I would rather use that than the crap waterborne paint that's out there. I used ppg and we had cars in and out the door in no time. Trust me when you switch you will be begging for ppg

@thistledewoutdoors3331 yes it was sanded primer, we don't tend to seal stuff much in the UK, but I can see a need for it with ppg lol.

@BoundByHonor700 I like sikkens it's good stuff. But I am starting to worry about the industry the dinosaurs won't change and there isn't many people coming into the trade who want to learn. We all would like a perfect gun finish with no nibbs but it's just no realistic they do happen from time to time. I think you have been spoiling your polisher and he expects to much now lol

@Ulr149tw21 no worries thanks for watching 👍

@Ontheroadbrogymgo it was alright and if I give it enough time I'm sure I'd get the hang of ppg but nobody was really that helpful in there and that just compounded the problems.

@@jamessharr8095 I literally have the same experience in reverse. I can tag you in a standoblue video where I was sharing how I get excellent results with the camera. We hardly ever had colour issues using that method.

@@paulphillipspaintwork I've use the camera and it gives me say 97 do a spray out card and the colours miles off, especially black and greys. I did toyota 202 last week it gave me 99.7 and it was really gray, I did 3 more spray out cards on different shade and all miles off.

@jamessharr8095 have your recalibrated the camera? When it asks for the blue effect tile, scan the white until it says there is a problem (3 times) then it asks you to scan the white then the blue (do that as normal) we realised our camera hadn't asked to scan the white tile for 3 months and were noticing our colour weren't match well any more. Recalibrated this way and they were perfect again.

@lesliwells5433 I have the 715 too, I really like that for base coat.

@paulphillipspaintwork ME too

PUT ASIDE TO GET YOUR OWN SHOP,OR A BIGGER YARD AND START THEIR, YOU GOT THIS

@lesliwells5433 absolutely that's part of the reason I started PainTeX, I did paint a lot for myself a few years back crash helmets for racing drivers they were really cool. If you look back at my 1st videos you a few of them 😎 see what I can really do with paint

@@paulphillipspaintwork COOL DEAL 😎 👌

@lesliwells5433 yea it's a shame, but there is just no talking to those kinds of people 💪

@paulphillipspaintwork I know, I worked for a oilfield company 12yrs.,same mindset,wouldn't listen to me, THEY LOST a 200 million dollar contract,because they didn't want to PAY ME,I LOST A JOB,THEY FIRED ME,BUT THEY LOST THE COMPANY,Do that make any sense, SO VERY SAD,what hurts the most, Many FAMILIES out of WORK.......

@lesliwells5433 yea it's sad, especially as these places have so much potential if they would just listen.

@Sovereign80 thanks, sometimes you got to say what's on your mind

@grantssmartrepairs thanks mate, that's partly why I have started PainTeX so I can work for myself. I joke that I'm unemployable in that sense.

@jasonevans6720 I just couldn't match the stuff. The visualise said it was good then when I sprayed it, it was pants lol

Absolutely 💯! Try spraying other brands, and you will quickly find out that PPG is overpriced, and other brands are more user friendly.

@@Ontheroadbrogymgo totally agree 👍🏻

PPG is like every other paint out there. Spies has more color chips to match from but,, PPG has us custom tinting ourselves......

This is why I went on to Baslac

@orkengoss1315 thanks I really appreciate that, just the initial cost of a big ol compressor and a booth is gonna be a huge investment then the paint schemes are pricey too. It's a lot to pay out.

@@ANDY-we7mr no mate, I don't have any iwatas

@srodgie alright mate 👍 thanks I really appreciate it 💪

@bartekl01 thank you, the gloves trick is using the back of your hand to check the level of orange peel in your clear coat by looking at the level of reflection 💪

@@paulphillipspaintwork hah, just like that. Ok

@@bartekl01 easy peasy

@@HRob73 👍👍

@midnighttutor yes, come to think of it, it does seem backwards. The 1.2 used to be a clear coat gun that I now use for base coat. And my new clear coat gun is a 1.3 because they don't offer a 1.2 but the atomization is so fine it leaves a perfect plat factory peel in the clear coat.

@benjaminchu6699 thanks, I really appreciate it👍

@@quikie1984 ohhhh yeaaaa! Lol

@JohnWD40TC02 dude that's awesome, it sounds a little like making carbon fibre parts. They had to take care of the moulds and they checked the gloss level after I had applied the satin clear coat. 😎

@@Ulr149tw21 you're welcome 👍

@glen4407 Oh, I've only been in a few places like that. I'm mostly the booth monkey lol

@@paulphillipspaintwork We had painters and body, body guys took over painting. We do too many things outside of paint. We do a lot of fabrication and welding.

@glen4407 wow I wish I could fabricate and weld, I do often feel like because "I am good at painting" and very consistent most places don't let me out of the booth lol so I miss out on learning things like that.

​@paulphillipspaintwork why you spraying that PPG junk -- and not spraying glasurit / spies hecker / standox / sikken / debeer

@refinishtechnology2529 mostly because I am an employee and absolutely no say in what paint we use. But I did pack up my kit and move to a shop that's on the almighty Spies Hekker 🤘

@markdonaghy3801 yea lol

@Ontheroadbrogymgo having good paint to work with, makes painting a pleasure too. I agree totally it's worth every penny.

@Ontheroadbrogymgo Thank you. I already have lol, I'm back on spies hekker and it's fantastic

@donproctor4480 I'm 6"2 so I'm OK with roofs lol.

@@sphdg thank you 👍

@sphdg no it's t4900, you should see it when you click add reducer

@@paulphillipspaintwork huh we don't have that at shop I'm working at were spraying ppg enviobase water

@@sphdg we are on envirobase too, this shop I'm at has close ties to ppg so we get all the latest products. Maybe ask your rep about.

@ashleymcanaw6073 thanks mate. 👍

@johnbecker5213 yea it's good fun lol. Especially when we are under pressure, we seem to be painting the cars the day the need to be finished 😆

@rafalkronig505 thank you 👍

@cpr83 thanks, yes I love mine. I'd love to know how to get sponsorships too, I bought mine 🤣

Well i just assumed some Of the bigger paint channels to be sponsored 😂

@cpr83 yea, I know a few guys who guys who get free stuff and even some who have been paid to make videos too

@@paulphillipspaintworkyeah thats How it works, But Nice to hear you still like it, paid with your own hard earned money :)

@cpr83 honestly it's my favourite spray gun. I'm looking to get more.

@JohnWD40TC02 lol I'd love for a company to just change paint but in reality they are often tide to contacts plus they cost a fortune lol. Ppg is good paint and I would love to do spray outs to check the colour before I paint every job but just doesn't happen. I'm getting the hang of ppg tho it's just you can't trust the system like I trust Axelta systems lol

@@ANDY-we7mr no worries andy 👍🏻