![T&M Farms](/img/default-banner.jpg)
- 55
- 61 939
T&M Farms
Canada
Приєднався 19 бер 2019
Welcome to T&M Farms, we are estiblished in 2016 making us sixth year farmers. Hope you enjoy all of our videos and enjoy the journey we embark on together as we share our farming experience with you. We currently farm 110 acres of cash crop and 85 acres of hay all in the Sudbury area. Check out our website for more details.
The Harvest Fun Continues! Major Breakdown | Harvesting Beans #2
The fun of harvest continues, we knocked out another field and now only have 12 acres left to do. If you watched till the end you would've seen the bent header shaft, this is going to delay us big time. Hopefully the weather co-operates and we'll get this breakdown fixed. So far the bean crop this year has been amazing and we're all very impressed with it!
Also a big thanks to Robert Gauthier Trucking for helping us with the transportation of our grain! There is still more content to come for harvest, so stay tuned and subscribe!!
-----------------------------------------------------------------------------
Website: www.tmfarms.ca/
Merchandise: www.tmfarms.ca/store/c3/Merchandise.html
Instagram: tandm_farms?hl=en
E-Mail: tandm@tmfarms.ca
Also a big thanks to Robert Gauthier Trucking for helping us with the transportation of our grain! There is still more content to come for harvest, so stay tuned and subscribe!!
-----------------------------------------------------------------------------
Website: www.tmfarms.ca/
Merchandise: www.tmfarms.ca/store/c3/Merchandise.html
Instagram: tandm_farms?hl=en
E-Mail: tandm@tmfarms.ca
Переглядів: 157
Відео
Delivering Beans! Verner CO-OP
Переглядів 1552 роки тому
This is just a little video to show the delivery process for the beans this year!! We are sending them to the CO-OP in Verner, ON for storage and we will sell them once the prices are to our liking! We managed to get 31 metric tons in this truck wich is the highest to date. All of them have been close to 30 though, so we are very happy. There is still a few harvest videos to come, so stay tuned...
Harvesting Soybeans! The moment we've been waiting for! #1
Переглядів 2932 роки тому
Finally, I can say that harvest 2021 has started! We knocked out ~85 acres and have another 25 to go! We've obtained 3 trucks so far and should be able to get one more! The beans are looking great, we're yielding about 50bu/acre and the moisture is around 12.3%. It's a really exiting time of the year and also very busy, but we're all thrilled to be out in the field harvesting our crop that we p...
Let Harvest Begin!! Harvesting Oats!
Переглядів 2762 роки тому
Well we had a friend of ours calls us to do some custom harvesting. So, we're kicking this year's harvest off with 10 acres of oats! We had the combine in town so I could work on it, as it would not fit in the shop and we had lots of work to do. The oats turned out really well, the moisture was around 11% and we were yielding around 50bu/acre! This was a great opportunity to get the combine out...
Baling Hay - Finishing up Hay 2021!
Переглядів 1633 роки тому
We're finished up hay for the 2021 season and it feels great to finally be done, but it wasn't easy. For the last bit of hay we had the worse weather, mind you it never got rained on but the humdity was very high leading to severe dew in the mornings. This lead to a very difficult time in drying the hay. Now that it's all finished we are waiting for the beans to turn and be ready for harvest! W...
More Spraying and a Final Push for Hay! (Cutting Hay + Spraying Fungicide On Soybeans)
Переглядів 863 роки тому
We sprayed our beans for the last time this year! We applied Stratego Pro Fungicide to protect our beans from various diseases that could affect our yield. We also gave it a shot of liquid fertilizer which contains mostly potash! This will help the beans while they are in the podding stage. On another note, we are giving a final puch for hay. We cut our remaining 45 acres of hay and once we bal...
Baling Hay - Squares & Rounds
Переглядів 1643 роки тому
We ended up baling 550 small square bales with our BC5060 baler and 152 rounds with the RB450. It took us 4 long days to complete this 55 acres of hay, from cut to delivery. I'm just glad that its over and now we can take a small break! I want the thank our crew for coming out and helping us with the squares! We still have another 40 acres left to cut, but that will all be round baled (thank go...
Get'er Done - Spraying Beans and Raking Hay!
Переглядів 873 роки тому
It's a very busy time of year! We are in the middle of finishing our second round of srpaying on the soybeans and hay season is underway! The classic herbicide worked wonders on the canola problem and now we just have to apply our fungicide next round of spraying. In terms of hay, we got it all raked and ready to be round and square baled next video. It's looking like a great yield on both crop...
Hay! It's time to cut!
Переглядів 843 роки тому
We had a 4 day weather window, so it's time to cut hay! We cut 55 acres in about 4 hours with the Pottinger mower. After we finished cutting, we had to deal with the volunteer canola problem we are facing, so I went and sprayed two of our fields with Roundup again but this time at added Classic Herbicide to the mix to knock out the canola! Website: www.tmfarms.ca/ Merchandise: www.tmfarms.ca/st...
Canada Day 2021 Fireworks
Переглядів 1733 роки тому
I know this is a little different than our normal content, but we had an amazing Canada Day long weekend and I wanted to put this up to share with friends and family, so I decided why not put it up on our channel to share with all you guys! We try to always do a firework show every year on Canada Day and this is probably our best one yet! A big thank you to the Cacciotti family for hosting us t...
Killing Weeds with Roundup? Post Emergence Spraying!
Переглядів 873 роки тому
The soybean crops has emerged and now we need to kill all the broadeafs and grass weeds that are trying to take over our fields. Our soybeans are Roundup Ready so we are spraying Roundup on our fields. The Gregson 750 sprayer is ready to go, so lets get to work. Roundup Transorb is the chemical we chose to get the job done! Thank you to all who have subscribed and support our channel. Website: ...
Putting Seed in the Ground! Planting Soybeans
Переглядів 3523 роки тому
#plant21 It's time to plant! The Case SDX30 air drill with concord 2400 air cart are ready to go! For our seed we are using Dekalb 003-29 round-up ready soybeans and with the seed we are applying MAP fertilizer (11-52-0). This has got to be one of the most special times of year! All the planting is done for the 2021 season and hopefully should be ready to harvest be the begining of September! T...
Let's get to work! Spreading Potash
Переглядів 1533 роки тому
So, we are in the field for the first time this year on camera! We have to spread 6 tons of Potash (0-0-62) over 110 acres! The all new refurbished Mobility 500 fertilizer spreader looks great and works better than ever! I showed a brief clip of the Ag Leader autosteer, but I will go into more detail in the next video. Planting should be right around the corner, as long as the weather holds we ...
Installing Depth Adjuster Kit From Red E
Переглядів 983 роки тому
Since we had some play in the gauge wheel high adjustment on our Case SDX30, we looked around for a way to fix it, when I stumbled upon Red E. They had the exact kit we needed, so I picked up 3 of them just to try them out, if all works well during planting we may redo the entire drill! Website: www.tmfarms.ca/ Merchandise: www.tmfarms.ca/store/c3/Merchandise.html Instagram: tandm...
Merlo Telehandler + Seed Delivery!
Переглядів 5363 роки тому
So we ended up leasing a Merlo 27.6 telehandler for a month! Our first job was to level the fuel tank with it which was no problem at all!! About a week after we did that, our Dekalb 003-29 soybean seed and 0-0-60 fertilizer showed up form the CO-OP in Earlton, ON! So we took delivery and unloaded all that, I couldn't imagine doing it without a telehandler!! Because the truck did not have enoug...
Installing Ag Leader Auto Steer on our Deutz 6210!
Переглядів 4,9 тис.3 роки тому
Installing Ag Leader Auto Steer on our Deutz 6210!
Finishing up the Disc + One Last Thing on the Spreader
Переглядів 723 роки тому
Finishing up the Disc One Last Thing on the Spreader
It's Back...AGAIN!! Getting the Disc Ready for the Season
Переглядів 1013 роки тому
It's Back...AGAIN!! Getting the Disc Ready for the Season
How to Change Transmission and Engine Oil on Polaris Sportsman 850
Переглядів 14 тис.3 роки тому
How to Change Transmission and Engine Oil on Polaris Sportsman 850
Painting Our Mobility Fertilizer Spreader!!
Переглядів 1233 роки тому
Painting Our Mobility Fertilizer Spreader!!
Still Prepping the Mobility 500 Spreader
Переглядів 553 роки тому
Still Prepping the Mobility 500 Spreader
nice work but you guys are not wearing any safety overalls
I changed my deutz fahr 7250 ttv transmission oil yesterday and while unplugging the three bottom plugs underneath I lost about 20-30 liters of old transmission oil What a mess I made
Great video!
How well does that tractor handle air seeder? Im looking to buy similar seeder and have tractors in same hp and weight range. However everything thing ive read is i need 250+ horsepower. I farm all flat ground in kansas.
My 2013 to change oil dealer says have to burp it to add the oil. How come you didnt. What difference.
the girl in the back dancing tiktok hahaha
Nice video, man! I work at AGL South America in Brazil and enjoy watching this install! Congrats!
How do you guys like it thinking of getting one
Dude don't sell the tractor it is still new. You're the only channel using Deutz I could find so far.
Yeah, we haven't sold it yet and if we do we plan on replacing it with another Deutz, probably a 7250TTV!!
@@TMFarms. New 7 series Deutz is great. Loads more features. Keep up the hard work.
@@TractorChamp. Yessir, that’s the plan!
I have a 6190TTV. Not enough videos online about service and use of newer Deutz stuff. I appreciate you guys putting this up.
Have a 5080, is a little smaller but about the only deutz video I could find.
cool to see local content!!
Yessir!! Thanks for watching!
@@TMFarms what type of tractors brands are run in your area mostly?
@@matteoricci1449 For the most part Deere and New Holland seem to be the majority of fleet, since they are the closest dealers around here. We run Deutz and I know a few other people who do as well.
@@TMFarms cool stuff
I would have tryed to straighten that shaft. Those bend back easily if you can get a jack or chain on it. The bracket usually pushes back in place easily too.
Yeah, that probably would've worked in the short term, but we ended up finding a local guy who made the shaft for $200, so now we don't have to worry about premature bearing failure or damage to the feeder house.
Shell spirax s6 txme very good
What size wrench did they use to open the oil cap of the polaris sportman
Awesome!
great video Trevor!
Thanks!
Nah!!! You surely don't want one of those things called a LICENSE! 😁😁😁
I know, what good are they, but apparently you can get in a lot of trouble if you don’t have one!
@@TMFarms,You can get in a lot of trouble with one too! Please be careful with it , a lot of people's lives are forever changed from mistakes and misfortunes.
And what about reset service interval?
Do you mean codes? If so, we never had to reset it, but we had a problem with the DEF and we had a tech out for that, I think he reset it then! Let me know if you’re talking about something else!
@@TMFarms yes codes, thanks for your answer.
What's part number?
Sorry for the late reply, I can’t seem to find the invoice with the part number on it! I’ll let you know if I find it!
yes Kuhn rotary rake is the way to go!
Oh no, you’ve been spending too much time with Devonte, if you’re gonna go with a rotary rake you should get a two wheel Pottinger or just get a V-rake! :)
Good job Dr. Meek and family, from Jason. G in the maintenance department at NBRHC.
nice job brother
Why were they carrying square bales around the side of the hayrack?
They were doing that because we ended up borrowing our friends rack. He has a thrower on his baler and he ended up welding the front of the rack so we could not flip it. Our only option was to load from the side
Our racks flip over and we can load from the front, but we had already filled both of ours up!
Yes Murray, that's how you wash out the jugs.😁😁😁
Superb!!! Glad I found your videos! I recommend checking promosm. It’s the fastest way to grow your channel!!!
that cam that dropped off be like finding a GoPro in a hayfield!
It was a GoPro lol! It took me a few rounds to even realize that it fell off. Finding it was not fun!
Looks like you had a neighbor racing you with his hay mower in the field beside yours.
Yup, we won the race though! Everyone is trying to get it done whithin the weather window
Hey man, 64mm oil filter wrench is what you needed 🤣.
Yeah, good idea, but I don't think it would've fit in there
@@TMFarms it does fit lol I just did mine on my 17 scrambler with one I ordered off of ebay
@@shawnperry9499 Oh ok, good to know, I will order one then, as I have to change the oil on our sportsman 550 soon!
Nice!
yes the kverneland best plow for sure.....
:)
Getting er done!
Great video!
Just like pro. Good job on the video. I really liked the footage especially the different angles and good explanations on how things work. I really got how the process of seeding works with that equipment. I also appreciated knowing about that auto-steer system on the Deutz tractor. Thanks for the content. Looking forward to seeing more.
Thanks for the awesome feedback! Glad you enjoyed this video!
Sometimes washing fertilizer equipment is more corrosive than blowing it off and keeping it dry. Keep an eye on it for awhile and make sure everything came clean.
Yeah I know what you mean, but it’s gonna get rained on anyways because we don’t have a building to store it in, so I think it might be better if all the dust is washed off immediately, instead of waiting for it to get rained on
Use a out bord motor gear oil pump works mint 6 bucks
Making it work and #keeponfarming. Love it.
Couldn't have said it better myself! Well done.
Must have done something right, the paint didn't wash off with the power washer. Try your welder after it cools down, sometimes the thermal overload will kick out from exceeding the duty cycle.
Yeah, we tried the welder multiple times, and it still doesn't turn on, we're testing the circuit board now!
When we remove a disk gang we lower the entire unit down close to the floor and remove the hanger bolts from the rectangle tube. Then we raise up the disk and slide out the gang, hangers and all. You have two hanger bolts instead of three bearing bolts and it moves the hangers out of the way. During reassembly you can start the hanger bolts without having the gang lifted up completely tight against the frame. This allows you to adjust its position slightly.
I've never thought of that! That would make it easier, I might try that next time!
Also, our cylinders leaked, making it hard for us to do that. Now that we have new ones, that should work! Thanks for the tip!
Weld up the shaft burrs and smooth down to square the shaft with an angle head grinder.
That's exactly what I plan on doing! Thanks!
Great job guys! What's the next project? 😃
Honestly, I don't know yet! We have a little work to do on the tractor.
Looking Good Trevor!
😁😁😁 Union Break! 😁😁😁
No, you don't have enough tape! 😁😁😁
Looking good Trevor!
There's no such thing as a drain nut unless you're talking about the person performing the work! 😁😁😁 By the way, you can come change my oil next!
Nice job Trevor
Thanks!
Great video!
Somebody's a little camera shy! 😁
Trevor, your just gonna have to talk to that pilot that keeps parking in the way! 😁😁😁 I'd have flew it around the pattern for him.
I was thinking about doing that :)
Looks like the booth worked well. You will want to repaint the wear surfaces again when the snow season ends.
Ok, thanks for the tip!