Відео

We are temporarily sold out but will have more units shortly. A solid FW upgrade is in the works as well so good things coming! Units will be available for purchase here: www.ailightshow.com/store-MFHja

Yes, since your LED strips are DMX compatible there’s no problem.

That’s a custom built booth by the DJ. His name is Travis McGuire. He has built a number for some of his customers. You can find him here: www.kyweddingdj.com/meet-the-dj

Yup, we have units available. You can purchase directly through our website: www.ailightshow.com/store-MFHja

These are the same OPPSK bar lights used in the other video where they were stacked one on top of the other. I don’t have the model name but maybe Travis McGuire will chime in or you can find them on OPPSK’s website. Yes, we are currently providing support through email. We are a small team, almost entirely made up of engineers. We don’t outsource our customer support in order to ensure folks get the necessary help. We do setup direct calls if email isn’t sufficient for a particular inquiry.

@@A.I.Lightshow - Thank you!

Those are from OPPSK. He is actually using 8 of them. He stacked two together and mounted them in a way to eliminate any obvious space between them. The Force 1.0 is able to treat the two stacked bars as if they were one giant fixture. This result can be achieved with just about any DMX bar light fixture out there with the Force 1.0

Hi Josh, The unit is available for sale here: www.ailightshow.com/store-MFHja Fixtures in this video: Prost Lighting DoppelBar Pix (two vertical mounted bar lights) American DJ UB 12h (two horizontal mounted bars) Unbranded light bar (horizontal bar in the center) Eliminator Stealth Wash Zoom (moving heads on truss) Chauvet DJ Intimidator Spot 360 (moving heads on totem stands) Rockville Rockwedge (uplights positioned in totem stands)

We have a Labor Day sale going on for this weekend only ($100 off) www.ailightshow.com/store-MFHja

We don’t sell the lights but you can achieve a similar setup with many options out there. These bars are from OPPSK. There’s actually 8 OPPSK bar lights in his setup. Each of those four sections includes two, one mounted directly on top of the other. The Force 1.0 can treat both as if they were one giant single fixture as you see here. This would work with any other DMX bar type fixture as well. The Force 1.0 builds/generates effects in real time. The effects are based entirely on the fixtures in use. In other words, nothing is preprogrammed and it decides what type of effects to generate based on what is in use.

@@A.I.Lightshow Awesome I will be buying your product once my gym is complete:-) thanks

This is bad ass!!!!

@@A.I.Lightshow Do you have set the fixture placement ID to the same on when you have 2x bars acting one big?

There’s actually 8 OPPSK bar lights in his setup. Each of those four sections includes two, one mounted directly on top of the other. The Force 1.0 can treat both as if they were one giant single fixture as you see here. This would work with any other DMX bar type fixture as well.

As long as the interface is compatible with your particular computer and the visualizer then there shouldn’t be a difference in terms of performance from one to another. We’ve personally used the ENTTEC DMX USB Pro with Capture. We haven’t used the eDMX1 Max so we’d recommend reaching out to the company producing the visualizer you are using to confirm.

@@A.I.Lightshow thanks for that information! Just been looking around to get one, just couldn’t figure which interface to get. Appreciate your input! 🙏🏻🙏🏻🙏🏻

Still a few weeks away from the next FW upgrade but definitely some cool and useful elements in the works. Travis was using some of them during his live sets at our booth...with a pre-release version of the FW. Thanks Derrick!!

@@A.I.Lightshow hell! Thats awesome! Currently having a blast, got some new moving heads to add to the mix and its just so much better with everything working together.

@OmegaDerrick Awesome to hear Derrick! Yeah, we find the more you throw at it the better it does.

@@A.I.Lightshow def noticed that, loving it even more :D

Absolutely. If that particular fixture isn’t already in our library then you can submit a fixture profile request via our website and we’ll add it in. www.ailightshow.com/fixture-request

@@A.I.Lightshow Awesome. Thank you for not only creating a great product, but also providing great customer interaction/support!

@RonBudLlamaDrama Absolutely! Appreciate the kind words!

They are currently available for sale: www.ailightshow.com/store-MFHja

Yes, the controller will take in a live audio feed and control your lights autonomously. You can interact with the controller as little or as much as you’d like. As long as your lighting fixtures are DMX compatible the Force 1.0 can control them.

Absolutely. Those are American DJ 3D Vision Plus panels.

Thank you! Greatly appreciate you taking the time to swing by our booth!

Thanks! Yeah, Travis was fire as usual!

It was great catching up with you in person Mike! Looking forward to meeting up again down the road…thanks for taking the time to swing by the booth. Can’t wait to see some footage when time allows on your end. Talk soon Mike!

Good question, no idea 😂! Thanks for the kind words!

Absolutely, the only issue you’ll run into here is that the Aux port is almost certainly a unbalanced stereo signal. The Force 1.0 requires a balanced input. There’s numerous devices you can grab to convert unbalanced stereo to mono balanced. If you grabbed one of those you’re golden.

Thank you. Could you please suggest a specific converter device that I would need to purchase?

@dragomirmijic5237 There’s many options out there but here’s one to consider: www.sweetwater.com/store/detail/ISOPOD--whirlwind-isopod?msockid=35030fc15e1c64ce07b01b7b5f036546

Thank you!

This coming Tuesday: August 5th. Sales will open at 11am (EST).

We’ll be opening up sales again on August 5th.

A typical laptop headphone jack output is unbalanced stereo. There’s certainly many options out there to convert that output to a mono balanced signal. You could also consider splitting one of your balanced outputs and feeding one to the controller. The controller input is high impedance and won’t noticeably load down the signal so there should be no audible impact.

@@A.I.Lightshow you’re the best🤗 can’t wait to try your product out!

Appreciate the kind words and interest! The AI piece of the unit is primarily focused on building / tuning effects. It takes in a set of data describing the lighting rig being controlled, and iterates through numerous pre-trained algorithms to generate a blueprint collection of effects. Some require numerous iterations to build successfully or to determine insufficient control elements for an adequate outcome, resulting in that effect being discarded. The effects then require additional iterative processes that occur in real-time to adjust timing, speed, etc. The end result is a library of effects that look preprogrammed for the actual lighting rig being used. That’s the concept in a nutshell! Thanks for asking.

@@A.I.Lightshow Wow that is insane. I can't say I fully understand but that's impressive. I'm looking forward to following this project further

We’re pushing to have units ready to ship by the end of this month. We will open up sales at that time. If you’d like to be notified you can jump on our mailing list: www.ailightshow.com/waitlist

Speed was dialed down. It all boils down to personal preference. Can crank things up to get very aggressive as well.

Which model laser used and price???

!!!!! 👍

@@A.I.LightshowLooking excellent!! 🫡

Yes you can. That’s done using the Fixture Group Overrides. If you assign your Pars to 1 of the 6 fixture groups then you can use the Fixture Group Overrides to assign your Pars to an Attribute Bank. The Para will then be statically set to however you configured that particular Attribute Bank while the rest of your rig is under autonomous control.

HA!! Joking aside, this is MAX mode at full speed. You can dial things down significantly.

Is this currently available? How much is it and where do I go to get it? Thanks.

@joshuaharper4439 Yes, they are currently available here: www.ailightshow.com/store-MFHja

@joshuaharper4439 we still have units available: www.ailightshow.com/store-MFHja

@@joshuaharper4439 Hi yes it is currently available! Price is $1099.99 www.ailightshow.com/store-MFHja

We will have another round of units at the end of this month: www.ailightshow.com

@@A.I.Lightshow do you know when? Would love to have this before the 27th

@joshjchong As of today, we’re still on track and aiming for the tail end of July….Closer to the 31st.

Hi David. Absolutely. A lot comes down to personal taste so what is "correct" in our minds may not be the right decision for you, all subjective! In this video we used two GigBAR Move fixtures so I'll provide feedback based on the GigBAR ILS. The first thing I would personally do is to make sure the Laser and the Strobe of the GigBAR ILS aren't active during slower subtle slower moving effects. This is done in the DMX Universe editor page of the App. For the "FLASH" (strobe) sub fixture you would set the "Strobe or Blinder Fixture" column to "YES". For the Laser sub fixture you would set the "Active During Mood" column to "No". In addition, I would likely also disable the Derby's during the slower subtle moving effects as well. Derby's aren't Strobe or Blinder fixtures but if you set the "Strobe or Blinder Fixture" column to "Yes" for these, then the Force 1.0 will turn them off during those subtle slow moving effects, whether your in Mood mode specifically or the Force 1.0 transitions to it automatically. If you do all of the above, then your GigBAR ILS will be configured as close as possible to how we configured the GigBAR Move fixtures in this video. Hope that helps!

@@A.I.Lightshow Hi Guys, thank you very much for your reply, appreciated.

Yes, you can use the “Color Overrides” function to do this (new addition). You can pick a single color or a combination of up to 10…this includes settings for gobo wheels, prisms, color wheels, and other attributes of fixtures that go beyond just simple Red, Green, Blue, Amber, White, UV color settings.

It sounds like you don’t have a DMX Universe currently loaded on your unit. Without a Universe loaded, there’s no lighting fixture information so the ability to create Attribute Banks or Scenes is not possible. You need to start with the Force1 App in order to create your DMX Universe(s). Once created, you can transfer/save them to the unit and then you’ll be able to access the Attribute Banks | Scenes.

@@A.I.Lightshow Thank you for the prompt answer, I will work on it thanks.

A future App update will allow for all Attribute settings to be made directly within the App with real-time feedback from your lights. We certainly considered what you are describing but opted against it due to the amount of inconsistencies we’ve come across with “identical” fixtures (majority being the inexpensive unbranded reproductions) having different color wheel arrangements, gobos, etc. Many people are buying these unbranded fixtures and we’d like to offer a universal fixture profile library without having to resort to numerous revisions due to those inconsistencies. We are certainly still considering this option. However, you can use the Attribute Banks to dial in specific colors across your rig and use the Color Theme Overrides to select those at any time. Good comments/questions!

Hi Niko. Please reach out to help@ailightshow.com and we’ll get you going.

@@A.I.Lightshow Just emailed! Looking forward to chatting!

Yes, you can set any color combo you’d like and force it to just use those indefinitely. The effects engine was designed to be as creative as possible in both the effects generation and its decision making process. We may design in an option to allow users to select the frequency it is allowed to transition if there’s enough requests. Here’s an example of how it performs unconstrained as it is now: Force 1.0 Office Demo (Fully Automated) ua-cam.com/video/MWJBHoy2Lrc/v-deo.html

Hey Derrick. Solid questions as always… Yes, the intension was to guarantee that any Attribute Bank that is called would operate exactly as it was created, regardless of the global control knob settings. If there’s enough requests to have Global Brightness control applied for this as well we will certainly consider doing so! There’s some options for moving heads. If you override a fixture group containing moving heads, they will move to whatever position you defined for that attribute bank and will generate whatever color, gobo, focus setting, etc., that was defined. An intended use case example would be if you wanted to focus a spotlight on a drummer or guitarist for a solo while keeping all other lights in your rig responding to the audio feed. Now, if you apply one or more Color Overrides instead, then all lights in your rig will only utilize those colors and other attributes defined in those chosen banks. However, your moving heads will still react as normal in this case. I will certainly take note of your request to provide the ability for your moving heads to still react in movement when a fixture group override is applied. We can work that into a future upgrade. Thanks for that feedback…great idea!

@@A.I.Lightshow thanks for the thorough explanation and examples! Appreciate that! 😎 makes complete sense now. Yeah in my head this is how i was thinking it, what if we could assign via override group fixtures for example, a purple color to Washes(fixture group 1), then all moving heads(fixture group 2) a yellow color that has already been defined through the attribute banks. Then all washes would only use purple and moving heads would only use yellow, while on any of the 3 mood modes still generating patterns according to the music. That was my thought process when i first saw the fixture group overrides. Change each group to a specific color and still have the internal ai engine generate patterns. Thanks for taking the time to hear me out🤘🏼🤘🏼🤘🏼 you all rock!

Great to hear you’re back in the saddle Lenny! Appreciate the kind words! Hope your Charity events continue to go well…very respectable!