Відео

It was all in the kit

Correct

If you replace battery and keep original BMS it might say recalibrate health in settings if your lucky.

Hi thanks for watching. You will need the original type of display for it to work again. If not available you will need to replace the inverter that’s in the wheel and do what I have done. Good luck

Have you cleaned all the pins on the back of the display?

Thank you. The display is missing so i will replace the controler.

Yes. Try and keep it cool. Extra heat sink if you can will help.

@@smartazz ok, thanks

If done before iOS 17.4.1 then your battery health will stay reset.

It’s very good and economical and I can say I don’t even notice it running on my digital meter . Unlike the solis 3000 that seems to drain the battery even if you’re not using any power and I noticed a 10-50w power draw at night with a flat battery.

@@smartazz What do you recommend between Sofar 3000, Solis 3000 and Victron Multiplus 3000?

@@cinelerraeasyI’d have to say Sofar but Iv not had a Victron to compare to

New app it might be 000000000000

@@smartazz ​​⁠sadly doesn’t work and I don’t get any pop up message confirming a level change or any error when trying these passwords. Guess I need to source an android phone and use a different app.

Yea it is possible to reconnect but it will probably take more time and cost too much to repair economically and safely.

Quite possible.

I’ll have to have a look. thanks . it’s a bit expensive but I’d love to check it out

No idea m8.

No I haven’t sorry. I will have to try it. I’ll let you know asap.

I have a xs max on 17.4.1 and JCID and Qianli not working :(

Hi sorry I don’t have the phone to check that information sorry.

In this case you need to leave the tag on. You can do this job another way now, I’ll send the link.

ua-cam.com/video/1IVrvysDq_Q/v-deo.htmlsi=r_SooExzqbBv8-bQ

Thank you

Yes perfectly

Chatting on here is good ;) or we can email, I can advise parts or battery options and it might help other people if it’s on UA-cam :)

After 17.5 dosent change too 100 %?

Iv got one for sale. It’s on ebay I’ll post the link tomorrow if you want. I can post to France no problem. It will be a auction listing :)

www.ebay.co.uk/itm/176321562098?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Fbu6jerAQ6-&sssrc=4429486&ssuid=Fbu6jerAQ6-&var=&widget_ver=artemis&media=COPY

Full uncut iPhone 11 battery replacement 100% health reset battery warning message original BMS weld ua-cam.com/video/p7zc1Sq4JdU/v-deo.html

So the phone will work if you remove it but the health will be at the old level. The new video I just posted will show how to reset the battery health without the repair cable ;)

I have a video coming out about it in detail soon. Keep the original BMS and reset it to 100% (no need tag on or any extra flex :)

The board powers the phone with the connecting cable when the battery is connected with the board. My other battery is the spot welder battery.

How get this board ?

​@@smartazzhow by this board

@@Lyngvegen10b will only work if iOS is 17.3 or less 17.4.1 will not reset the health. They are on AliExpress

@@smartazz You still can. If you do the same repair as you did in this video and later on do a flash with 3utools to 17.4 and pressing "restore battery health"

For doing this particular job right now this is the best tool to do it.

It’s a KC02 board I’ll do a more detailed video about it asap

ua-cam.com/video/MP8mh6mlLy4/v-deo.htmlsi=NQi74j0pZnP29i5l Check this video out. I believe it will fix your original BMS problem :)

I can upload the after install video if this will help ? It’s definitely a shoehorn job that’s for sure. But once in place it’s ok.

@smartazz that would be very much appreciated, as I've got the same battery and I'm trying to get it working with my sofar me 3000 .. it will give you legendary status in my eyes 🙏😂

@@sparrowsends ok I’ll try and go the extra mile and show the me3000sp working with this battery ;)

@smartazz words fail me of just how amazing that would be I've been struggling for a while now , I've almost been at a point of giving up until now , it's hard to explain how happy I'll be if I can get it working as I ain't got a clue .

@smartazz sorry to nag like a old woman but have you had a chance to do it , also can you include the can cable connection to the sofar and what battery setting you selected on the sofar please I.e pylon dafron thanks in advance

Yea absolutely

It will work but for how long ??

This is a better option ua-cam.com/video/MP8mh6mlLy4/v-deo.htmlsi=WedVNN6Z-thPO0_S

Have you tried all the 0000s ? 13 of them.

@@smartazz Yes I have tried with the 12 zero and it doesn't work for me

What happened with this BMS was that a friend made some changes to those levels and he doesn't remember the password he put on my BMS and now it only has level 1 and I can't make changes. I can't find how to do a factory reset this BMS

Only level 1 with 00000000 works for me. 8 of them

@@smartazz level 5 only supports 12 digits

If it’s a Ant BMS you will probably need 3-5v to turn it back on.

+86 188 2343 2523 Lulu-Bizbee What’s app her and she will help you :)

@@smartazz ok

Awesome more information please

Many hobbyists have offered solutions for visualising and storing battery data. Unfortunately, there is no way to use this data for other purposes. I use this US2000C for the power supply of a SERVO drive and constantly need to know how long I can move this vehicle module without recharging. For this I need this software that I have developed.

SLD8S27a is ESD Suppressors / TVS Diodes 27V 7kW UNI-DIR SLD8S AEC-Q101 SLD8S28A is ESD Suppressors / TVS Diodes 28V 7kW UNI-DIR SLD8S AEC-Q101 So apart from the 7 and the 8 been different there is no difference

What version have you got? Also have you updated the app or had a new phone ?

Sorry I don’t know the names :(

Yes it gets extremely hot and will burn if overloaded

@@smartazz wonderfull test you did :) , I wanted to run the hoverboard motor( 350W) on 60V to give more power but I think it will over heat , I also though of rewinding it for more power , But I see that the is no space in the stator to increase number of turns .

@@amrmansour4947 correct 👍

I can’t remember the setting I used but I do know it was delivering 1440A per weld.

Still working perfectly well :)

@@smartazz glad to hear it's still running well. I'll order the same controller and hook up a 52v pack. Thanks!