Відео

@@JB-TM-2023 I don’t work on the cards for customers, but I make these videos to help guys that work on cards with my products.

@@joepatterson2424 you have to dry it flat between the mats. It can take several days and then you wanna transfer it to a sleeve and into a case. That will keep it nice and flat and it will stay that way.

@@SG-gc7mn yes, same technique ✌🏼

@@mannyramirez9152 no

@@christopherpalmer4524 I have never done that. I’m holding the cards between drying mats so an external dehumidifier probably wouldn’t do much based on the way I work on these. I also work in a guitar studio so it’s crucial that I have 45% humidity at all times for my instruments

@@Nate100 no, this is how you fix a corner

@@jorgealbertoguzmanrodrigue5775 let me show you some good TCG stuff www.kurtscardcare.com/tcgcardcleaning

@kurtscardcare sir, I don't have any instrument for humidity. I just purchase for polish and spray

@@RonLarhz no

@@Nate100 I’ve never had a problem getting cards graded. My customers grade their cards too. This is not something you leave on your card. It just cleans them up. Or if you’re working on dents or stuff like that, it’s just getting stuff back to the original shape.

@@HarriTheBear I use new applicators each session.

@@beckhitcards9792 I just like to show a variety. All of these work sometimes you just have to combo these techniques.

And I'm willing to share , it only has a bent corner. Other than that it's mint

@@jsnm4520 good question. watch this demonstration, you can just use light mist of Card spray on each pad and hold the card for a couple days that should make it flat. It’s easy to do. ua-cam.com/video/bZLDbmt0w4I/v-deo.htmlsi=kJrLwZVXA37pd0EY

@@kurtscardcare I'm already doing that with singles and it really does work! but this time I have like 100 of them, so wondering if there is a 'bulk' method for flattening them simultaneously

@@quentin6274 that is unfortunate, can Topps offer you anything for the damage?

@@SteveOwens-z3t yes good question, I’ve never had a problem with getting cards graded after cleaning them up. I’m not sure if you’ve worked on your cards yet, but my products are not something that stick or stay with it. It’s something that you’ll use to clean up the issues you’re working on and it doesn’t stay with the card.

Check this out - www.kurtscardcare.com/post/fix-cards-damaged-in-screw-cases

You can find them linked here - www.kurtscardcare.com/products-we-love

I appreciate you watching!

@@stevetrippier I’ll drop you his Facebook page. facebook.com/share/1EekBm5Dak/?mibextid=wwXIfr

@@NostalgicNolan I knew that one of my smart viewers would know the answer. I appreciate it Nolan.

@@RP-dv3pw thank you

@@bobbyhowell5754 I’ve been able to make creases look a little better. But if they have cracks or missing paint or both, it doesn’t really do anything. If you’re on Instagram, you can always send me a picture.

@kurtscardcare thank you sir whenever I get home I'll send you pictures. Thank you!

@galvanizedgnome I agree, it was altered by somebody’s fingernail, but good thing we know how to fix them back to the original position. Not altered anymore.

@@TCG-DEALZ-PLUS if you use too much spray and get the card saturated you can mess it up. But light spray with repetition on the pads produces great results.

@@Bergacci88 I get them on Amazon www.kurtscardcare.com/products-we-love

@@mikeyspikey Yes. It’s toolbox liner like I put in the Card Care kit. They have a couple options. I use quarter inch and eighth of an inch thick. I use them both so you must have noticed the quarter inch thick.

@kurtscardcare that makes sense. 2 different thickness. 👍

@@mikeyspikey in my opinion, I don’t think one is better than the other. I use them both interchangeably.

@@Ludacradumfn no but thank you for asking. I did not do this card personally either, this is a customer sharing their feedback with. I can teach you how to do this, it’s easy. Take a look at my TCG playlist here on UA-cam. If you need any products are available at my website and I’m always here to help you with support and customer service.

@@kurtscardcare Ok thank you, i will check out your website

@@TCG-DEALZ-PLUS ✌🏼You spray it on the black card mats and put the card in between. You hold the card and it will move it back to the original position. This one took over a week.

@@HarriTheBear I can’t say I totally understand, but I fix every corner on every vintage card that I can to the best of my ability.

@@NathanBurnichon I don’t know, do you have any other metal cards you can try to test on? I assume it would be easy to clean, but I don’t know all the specifics.

@@MKultraInstinct I make the card spray, but the other products come from Amazon www.kurtscardcare.com/products-we-love

@@GrumbleGamer18 iPhone

@@GrumbleGamer18 great question, I do not do that. I throw those away. I get them on Amazon they’re affordable and using a clean one as important so you don’t scratch anything up. Great question. www.kurtscardcare.com/products-we-love

@@delsonmorris5903 if it’s sellable, is it for sale? Shoot me a picture through my email. I might buy it off you.

@ it was in 1958 that I made the scrap book And not sure how to send pictures

@ trying to learn to send pictures Also have Hank Aaron and 10 other ones

@@Ludacradumfn yes, I’ve never had any pushback from grading services on Card Care projects like this.

@@kurtscardcare Thank you

@@DaddyBerns137 yes same ones, if you need to pick up more of those, it comes in a roll. I get it on Amazon. www.kurtscardcare.com/products-we-love

@ thanks for the response. I just bought some 👊👌

@@ay_bicboi5087 the Card Care kit comes with one, my vintage combo I put eight of them in there. They are disposable and you will go through them. But you can get this material on Amazon in a roll. I cut it into 6 x 6 squares. www.kurtscardcare.com/products-we-love

@@kurtscardcarecan you post the link to the pads? I have one of your kits but need more.

@@joshredl3543 yes I put it in the link above in the previous reply. Happy new year.

@@kurtscardcarethanks I ended up getting some! Happy new year!

@@TedWilliams1959Fleer thanks man, I appreciate you watching this one. Logical steps for logical collectors🤘🏼🤘🏼

@@amen_ra6926 I agree with you for sure. If you ever find them, you’re welcome to email me a picture or shoot me a picture on Instagram. I could always give you some advice.

@@Fișħng-Frenzy yes, you can. But a semi soak might be better. That way you can hold the spray on the card for a few hours. That might break it down. If you’re on Instagram, you can always shoot me a picture.