Відео

Our system is compatible with the Sub Woofer! This particular customer did not have a sub, but our current, standard Jeep Wrangler system does have accommodations for the sub woofer.

Absolutely! You can use code MIL100 at checkout and a discount will be applied!

Glad to hear it! Those CD30's come with just raw wires do the enormous variety of connectors available. Typically what we do and what we advise customers to do is utilize a cigarette-lighter style plug with butt-crimp connectors to attach to the wires.

thanks for the kind words, flat is the goal! We want the system to be as generally useful as possible, so you can choose which orientation works best for you.

​@@airdowngearupthe only other thing I'd like to see is something that locks the hinges or the platforms together so it stays flat, instead of using a blanket or 2x4 underneath it. Is this something in the works? Maybe something similar to the 5th Gen

@@Ill06Taco We wouldn't go to quite the extreme that is the 4runner sleeper, but we have an idea in mind that would change the orientation of the hinges, which would make the sleeper sit perfectly flat without any supports under

Thanks! That's on the list, eventually!

We haven't confirmed this in a 4XE. I suspect there's some differences in the cargo floor when compared to the standard versions?

We are excited to get our hands on one when they come out!

That's exactly what we intended the system for! Our sleeping platform can be used completely independently of the 2nd row seats. We can do exactly what you described with this. We have even added top-access panels in the sleeper before to help access that storage area underneath when deployed.

@@airdowngearup is there a separate slider for when seats are out? So, the seats-out version is longer with access hatches, and seats-in is shorter with no hatches?

@@paulvarese1405 The seat-delete system does have a longer sleeper, simply because the seats themselves occupy some of the length available inside the vehicle. As for the hatches, you can also add an access hatch to the convertible (seats in) sleeper.

When extended, we fill every inch of length available with the 2nd row seats in place. The platform itself is 68inches long, which nicely supports basically any available sleeping mattress available. We have had great results with the Kammock Ursa Minor sleep system and the Exped megamat line of products.

Absolutely! Our systems ship with all of the critical sub-assemblies made, and you complete a few simple steps to finish the build!

YotaMD and ADGU go together like peanut butter and jelly. haha.

We can chat through options via phone or email and you're certainly welcome to visit the shop as well! We just opened up a new expansion which will have some demo/showroom space soon. We're booking installations for April right now - lead times are 4-12 weeks right now, pending which configuration you have in mind. As an installed system, you'd fall on the shorter end of that lead time range. Reach out, we'd love to get you set up! -Andy

Thanks!

68" on the standard sliding sleeper shown here. We also have an optional 8" extension flap, but that requires seat bottom removal if you want to flip that extension open. Additionally, we have 73" of length on the 2nd row delete option which is not shown here, but is an existing design we have available for the 5th gen.

@@airdowngearup does the 73” require seat bottom removal? Thank you for your response.

@@marktracey3933 Yes, for the less common seat delete system, the seat bottoms AND backs have to come out to get that 73" length. You can do just the 60% or the full width, but the backs and bottoms must come out to use our seat delete system. If a semi-permanent seat delete isn't desirable you can do the more common convertible sleeper with the optional extension flaps which yield a 76" total length. Those extension flaps only require removal of the seat bottoms for either the 60%, 40% or both sides. Also keep in mind that if you're sleeping solo, you can sleep at a slight angle and get plenty of available length.

@@airdowngearup Sounds good that information comes in useful when trying to decide on something like this. At least for me. Thank you

Not for everyone, if you're looking for cheap that's not us!

Hello! In this particular customers case, they had a somewhat elaborate battery and power management system under the the platform itself (not provided by ADGU) what just about all of our customers do is run their fridges off one of the many available power stations (jackery, ecoflow, wagantech, bluetti, etc), and plug the power station into the vehicle. You can definitely start with the storage drawers and add the CD30 fridge later! You can even swap back and forth, modularity is one of our primary advantages.

1/2inch! We have an aluminum frame for all of the structural support, and the top panels and drawer boxes are 1/2in

Premium is not for everyone. If you are looking for something cheap that's not us!

Drawers are rated for 150 pounds, but we've tested then with nearly double that and no issues. Most people find they are running about 60-70pounds in a drawer (including recovery gear, tools, etc)

Very glad to hear that! We look forward to hearing from you!

Yes to both! Our standard sleeper is split down the middle and joined together with a tie-plate. You can simply remove the plate and use the sleeper as a half-width sleeper. We can also add access panels to the top panels which would allow access to gear in the drawers from inside.

Thanks! This is our Seat-Delete Mega Drawer system for an FJ Cruiser with one slide out table.

Thanks for the kind words! Updated pricing can be found here: airdowngearup.com/collections/jeep-jlu/products/ss1-jeep-jlu-sleeping-platform-drawers-fridge

We sure do!

About 68 inches!

Oh well you're definitely speaking our language, we would love to help make a trip like that more organized and comfortable for you. We can absolutely do the configuration you described. Reach out at info@airdowngearup.com and we can get you set up!

Oh we'll absolutely have our full suite of products available for the 6th Gen! That might have to be a shop-truck purchase right away.

Great question! In one word: shipping! One limitation that a lot of people may not be aware of is many drawer systems utilize large, single piece panels which require freight shipment, which requires liftgate service in residential capacity which can cost ALOT, adding a 'hidden' cost most are not aware of. We split the panels to allow ground shipping and then tie them back together with some aluminum brackets. All of our systems strength comes from the tubular aluminum frame underneath, so we have no compromise in strength doing it this way.

42x67

That's a great question! This is a MAJOR miss from toyota in our opinion not having a factory switch inside. Thanksfully there is an aftermarket company that provides a solution! We put a little video together on this fantastic solution: ua-cam.com/video/Aag361v3-qc/v-deo.html

thanks for the kind words!

DM sent! We can *probably* drop our JL system into a JK as well, just need to confirm in person! Anyone in CO with a JKU wrangler come on by so we can check!

That's a great question but ultimately it is not the same system. For each vehicle we try to maximize the drawer volume as much as possible, and we find that on the 3rd row 4Runners we can get a *little* more volume so we have the system sized for that. We do re-use the same floor cover and anchor bars though! Same sheet metal on the cargo area floor between the GX and 3rd row 4Runner