- 141
- 64 664
Ethan Cho
United States
Приєднався 19 тра 2013
I like 7x7
4x4 29.26 PR Average
Unfortunate that the DNF on first might have costed a potential 28 average, but I'm pretty happy with these solves overall. It's good to see that I got something decent the one time I actually practiced this event, so hopefully I can get something better with a bit more practice and lucky parity counts.
(DNF) 30.01 (26.87) 28.13 29.63
Ohio State Winter 2025
(DNF) 30.01 (26.87) 28.13 29.63
Ohio State Winter 2025
Переглядів: 77
Відео
the weirdest 6x6 solve ever...
Переглядів 18014 годин тому
14 seconds between starting l8e and parity... I don’t think I've gotten edges that fast ever. Sub 70 pace with insane centers, and that's even including the "double parity" and mediocre 3x3 stage.
1:16.44 Official 6x6 Single! WR30
Переглядів 36914 годин тому
It's sad that the mean also had a 1:29 and 1:39, but good solve nonetheless. Shoutout to Henry though for telling me to full send on last after getting bad first 2 solves. Ohio State Winter 2025
7x7 1:53.19 Single
Переглядів 76814 днів тому
I think I'm finally getting better at edges. First good single that's not carried by centers.
6x6 1:18.62 PB Mean!
Переглядів 25621 день тому
Finally a decent sub 80 mean. I think I can get a sub 70 single once all the stars align. Cube: Purple core mag AoShi Generated By csTimer on 2025-01-04 mean of 3: 1:18.62 Time List: 1:15.71, 1:16.38, 1:23.77
How to use Angstrom and FZ Lubes in Big Cubes
Переглядів 1,1 тис.21 день тому
A good way to use Angstrom and FZ lubes in big cubes to maximize performance in the long run. 0:00 Introduction 2:03 Don't use DNM 2:39 Angstrom lubes 6:03 FZ lubes www.thecubicle.com/collections/premium-lube/products/fz-lube-bundle www.thecubicle.com/collections/premium-lube/products/fz-glide?variant=42085141905491 www.thecubicle.com/products/angstrom-lube-bundle-1?_pos=1&_sid=98e5f0c00&_ss=r ...
XMD Spark v2 Review + Solve
Переглядів 1,5 тис.Місяць тому
Thanks @Henrylichner for giving me motivation to finish this review; I hope it helps! www.thecubicle.com/products/x-man-spark-7x7-v2-m?_pos=1&_sid=08f8972c1&_ss=r
Mitch saved my 3x3 average | First sub-8 Average!
Переглядів 181Місяць тому
Definitely carried by luck, but I don't care at this point since I've lost a lot of possible sub-8 averages to nerves and bad luck. Hopefully I can improve more now that I overcame this second barrier, and get an average that doesn't count a 9.3. Also it's funny that a 7.9 average got third in a Nebraskan comp ☠️ 7.17 (9.59) 7.32 9.30 (6.25)
9x9 5:14.65 PB Single #qytoys #qiyi @MoFangGeQiYi
Переглядів 212Місяць тому
The spoon or aochuang couldn't stop me from improving my 9x9 PB today.
5:37.02 9x9 Speedsolve #qytoys #qiyi @MoFangGeQiYi
Переглядів 365Місяць тому
Solve starts at around 1:10 Sorry that my hair was blocking the half of the cube, won't happen again 💀 I really like this 9x9, it is very nice to turn and really smooth.
7x7 1:58 Single | XMD Spark v2
Переглядів 786Місяць тому
I really like turning this cube, but it has a hard time retaining a cubic shape during edges and 3x3 stage. I'll try swapping to the stronger springs and seeing if that helps. Sorry that the camera is out of focus for the first half of the solve, but luckily I won't be using this setup for much longer.
Tied 6x6 PB Mean 🫵💀
Переглядів 1862 місяці тому
if this video gets 1 billion likes i will get wr at my next comp
My best official 6x6 solve
Переглядів 1872 місяці тому
I have an official 1:22.00 and 1:22.21 but they only had 0 and 1 parity so this solve was better other than luck. Overall I was solving alright, but my hands were cold and shaky and I made some dumb mistakes in the other 2 solves. SPAMtown III MN 2024
8x8 3:46 PB | DianSheng Galaxy Ballcore
Переглядів 6332 місяці тому
Can't wait to practice 9x9 too. This cube is good but the magnets are too strong.
luckiest 5x5 solve ever (ft. l2c skip and blastoise)
Переглядів 1792 місяці тому
luckiest 5x5 solve ever (ft. l2c skip and blastoise)
42 second 5x5 solve to watch before going to sleep
Переглядів 1,1 тис.2 місяці тому
42 second 5x5 solve to watch before going to sleep
this is how fast you need to turn for sub 75
Переглядів 4893 місяці тому
this is how fast you need to turn for sub 75
6x6 1:19 mo3 except it's all luck (first sub 80!)
Переглядів 5163 місяці тому
6x6 1:19 mo3 except it's all luck (first sub 80!)
The AoChuang v6 is good but expensive... How you can make one for half the cost
Переглядів 1,6 тис.3 місяці тому
The AoChuang v6 is good but expensive... How you can make one for half the cost
Some fast 6x6 solves (featuring 1:14 single)
Переглядів 3523 місяці тому
Some fast 6x6 solves (featuring 1:14 single)
29.69 Official 4x4 Average! First Sub-30
Переглядів 1963 місяці тому
29.69 Official 4x4 Average! First Sub-30
former top 60 clock solver attempts clock again
Переглядів 2653 місяці тому
former top 60 clock solver attempts clock again
would the rs3m cores work on a v7 even though its a different mechanism?
no, since even layered cubes have a different core
exellent
Triple or double track?
double track
Does anyone know of some washers that fit? I don't have a 3D printer
i heard that yuhu washers work but havent tested that myself
@@EthanCho they are perfect from a yuhu v2m, thank you!
This mod is very good i was able to get sub 9 official average with it
Nice B)
6x6 model ?
core mag aoshi
aoChouang
cube?
ballcore aoshi (cho 6)
@@EthanCho thnks man, congratulations for the single bro, youre a reference for me
@@EthanCho no its a gan 6x6!!!!
This is pretty weird
youre weird
in one year 14 second l8e will be bad for you 🔥
insane 🔥
What is the reason for cutting the triangle?
it reduces friction/weight and makes the turning feel faster
Fast balls
top player soon
tough solve boy
You get good solves with edge permutations so maybe practice your edging algs
thank you. I just wanted to let you know i was a big fan of your acting in squid game
speedy
lets goooo
😮
🐐
nah i just prayed to the goat before this round
the goat
Does XMT10 is necessary? whay i skip it?
it isnt necessary, you can use any light silicone
any recommend?
@clementse5107 maybe like cubicle weight 1, 2 or 3, or lubicle speedy
@@EthanCho thankss broo
What magnet strengths would you suggest for the magnetic core?
i like n50, but n42 might be better if you prefer weaker magnets
I'm a fan of stronger magnets just wanted to be sure about this cause I'm on my second meilong v2 cause the first one used seemed to make them waaaay too strong but I also wasn't using your stl file. Saw your video comparing the spark v2 to your meilong and I'd rather just make my meilong better at that point. Thank you!
Fast fr
so if i can buy a rs3m v5 core mag kit i can use it in AoChuang? also can it fit in aosu v7? thanks
v7 might not fit as well but it will work for the v6
fasttt 😎
becoming mark
Meilong?
yeah
i was hoping to see hoyra
don’t worry i would never use hoyra
@@EthanCho 😢
Getting better at edging indeed!!
💀
Get nr
NR=WR
@sultanbekovchyngyz-speedcuber yes
How much gravitas do you have?
i have a lot but this one is nearly empty
Ok I haven't bought gravitas yet but will in the future
Can I use this 3D printed core to do the same thing with a single track AoSu v7?
yes
If you have a rs super ball core lying around, the core of that fits as well so you don't need to 3d print.
kiss me ethan cho
😄
its definitely a rubiks brand!
youre definitely a rubiks brand
wow, very insightful video ethan! now I can make my own timer to time my solves! youre a life saver!
this video applies to everyone except you
Niceeee Thank you very much, good video!!
what does pb3 mean?
third fastest solve
Is the picube core magnetic meilong 7x7 the best Cube? I want to order one
theirs will still have problems with the centers breaking, but other than that the cube is solid from what ive heard
@EthanCho how much is your custom made weilong?
currently its 70 dollars for us shipping
@EthanCho how much is it for hungary shipping?
you can see what shipping comes out to here www.ebay.com/itm/315547461657?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j38HxRxAScG&sssrc=4429486&ssuid=j38HxRxAScG&var=&widget_ver=artemis&media=COPY
3d printing object scale?
sorry, im not completely sure i understand what youre asking but i didnt change the scale of the object at all
like the size, does stl include object size?
edging like zimmer 🔥
Nice
Sub-60 when?
ill get sub 1 when the vin 6x6 is released 😳
This is a nice angle
i tried both setups and really like them alot! fz setup on the 5x5 and angstrom setup on the 7x7
I'm going to do these as I like this cube a lot. would the LBL Designs core mag kit work as well?
yeah it would, but i wouldnt recommend it because the magnet strength is very weak
@@EthanCho glad I asked, thank you I'll go with the picube one :D
Watched this while going to sleep 🫡
Lubest is the goat