Reef Knot Sailing
Reef Knot Sailing
  • 13
  • 20 185
Reef Knot gets new Velox Antifouling.
In this video, we’ve taken Reef Knot out of the water after 7-8 months to inspect the anti-fouling we applied earlier. While the Hempel Olympic product has performed in some areas, its ablative nature has made regular underwater scrubbing difficult, creating a black cloud that obstructs visibility after just a few wipes. To address this, we’re switching the anti-fouling on the keel, rudder, prop shaft, and prop to VELOX, a hard, non-ablative surface that allows for easier and more effective cleaning. We hope that VELOX will also perform better as an anti-fouling product. In this first part, we apply the VELOX and re-coat the rest of the hull with Hempel Olympic before putting Reef Knot back in the water. Stay tuned for part 2 in a few months, where we’ll check in to see how everything is holding up.
Переглядів: 102

Відео

Sailing Eastern coast of Tasmania from Flinders island to the stunning Wineglass Bay.
Переглядів 3 тис.10 місяців тому
Embark on a captivating sailing expedition with us in this episode as we set sail from Lady Barron on Flinders Island to the enchanting Wine Glass Bay. Navigate through Schouten Passage into the tranquil Oyster Bay, facing challenges like light winds and bumpy conditions. Join us as we share the thrill of overcoming overnight engine troubles and immerse ourselves in the breathtaking beauty of W...
30 minutes of down wind sailing
Переглядів 36310 місяців тому
Embark on a serene 30-minute escape as we invite you to join us on a tranquil sailing journey in Gustaf Musselton Bay, nestled in the enchanting northeast tip of Tasmania. In this blissful video, witness the simple joy of sitting back on our boat, letting the wind gracefully fill the sails, and feeling the gentle embrace of the sea against the sides. We've set the camera, pressed record, and no...
Sailing Eastern coast of Tasmania into Eddystone Point
Переглядів 32110 місяців тому
Join us on an adrenaline-fueled sailing adventure along the northeast coast of Tasmania in this gripping episode! Brace yourself as we navigate treacherous rocks aboard our boat, Reef Knot, battling big seas and challenging conditions. With precision and caution, we thread the needle, opting for the risky path between a distant point and its outer reef rocks. Watch as we rely on Navionics for p...
Sailing to Flinders island with a 3 day stopover.
Переглядів 38010 місяців тому
Join us in this exhilarating episode of Reef Knot Sailing as we set sail between Prime Seal Island and Flinders Island nestled in the picturesque Bass Strait. Immerse yourself in the breathtaking vistas as we spend blissful days exploring Flinders Island, indulging in tantalizing local cuisine, and engaging with the warm-hearted locals. From scenic walks unveiling nature's marvels to capturing ...
How to tie a bowline knot the easy way. If you like this please subscribe?
Переглядів 19510 місяців тому
PLEASE if you like this video and it's been helpful to you please subscribe to our channel?
Alone on the uninhabited island of Prime Seal in Bass Strait Sailing.
Переглядів 80111 місяців тому
Prime Seal Island is a long island, with a high central ridge and an area of 1220 ha, in south-eastern Australia. It is part of Tasmania’s Prime Seal Island Group, lying in eastern Bass Strait west of Flinders island in the Furneaux Group. The island is at the time of this recording uninhabited. We tried to find out the current status of who owns the lease for this amazing island so if anyone k...
Sailing across Bass Strait from Geelong to Prime Seal Island Tasmania.
Переглядів 3 тис.11 місяців тому
this week on reef knot sailing waycross the mighty Bass Strait in our go anywhere boat Reef Knot.
Honda 2.3 HP 'small' Outboard Engine Review.- Personaly Do not like the Centrifugal clutch☹️👎
Переглядів 7 тис.Рік тому
Dive into the performance-packed world of the Honda 2.3 HP Outboard Engine with our comprehensive review! If this video helped you PLEASE LIKE AND SUBSCRIBE? MY RECOMMENDATION - "DON'T BUY IT" We've been using this outboard for a few days now and honestly I would rather return it! ☹️ why? because of the centrifugal clutch. I don't like it. you can't give the engine a few revs to warm it up. if ...

КОМЕНТАРІ

  • @motorenbastler9289
    @motorenbastler9289 12 днів тому

    A honda is the best thing you can get, it will outlive the most of the other engines. Of course you wont notice a difference if you onlyy drive 3 hours a year

  • @trredston
    @trredston 21 день тому

    I’m going now!!

  • @rainerneumeister5239
    @rainerneumeister5239 2 місяці тому

    Also very low powered. Compared to other 2.5 HP outboards. Only good for short distances.

  • @mattwaters6987
    @mattwaters6987 2 місяці тому

    2018 😊

  • @mattwaters6987
    @mattwaters6987 2 місяці тому

    I've had mine since 2018 and luv it. I always fire it up at home first before launching. Carry 5 ltr. of extra fuel. Good for around 6 hrs at full speed. Maintenance is key as well. Cheers! 🚤🎣😊

  • @flyingfox10001
    @flyingfox10001 3 місяці тому

    Once again we see people with a nice boat/had some cash and not much of an idea on sailing!

  • @shadboy
    @shadboy 3 місяці тому

    too loud

  • @GrantRollerson
    @GrantRollerson 3 місяці тому

    Insightful! Thx you Pete

  • @russelldieterle8846
    @russelldieterle8846 4 місяці тому

    local honda outboard service would not work on bearing clutch. he said it was too labor intensive and not worth it. he told me too throw it out and but a new motor for about $1000. worked on it myself found out the bearing was rusted all i did was soak the bearing with jd blaster and now it works. free of charge.

  • @mnp3713
    @mnp3713 5 місяців тому

    well i love mine best small outbord ever, perfect 4 what i need - though i agree some of the bolts will rust but they dont stuck. If you need revers turn it 180 or you got too big a boat for the tiny engine. even have the same boat

  • @AnthonyParr-do5jk
    @AnthonyParr-do5jk 7 місяців тому

    I had one about 10 years ago it was a great little motor for a few years and then it wasn't. The tin tappet cover rusted out when I went to investigate two of nuts deep in the bottom cowl were to rusted to remove i threw it under the boat for later investigation it got stolen which solved the problem. Not all the nuts were non stainless so if you have one replace all suspect one's

  • @JohnSmith-gm3qm
    @JohnSmith-gm3qm 8 місяців тому

    That motor is far from being straight

  • @John-ck1fd
    @John-ck1fd 8 місяців тому

    Facinating. Thanks so much for this video. I'm now a subscriber.

  • @jimthorleydronefootage
    @jimthorleydronefootage 8 місяців тому

    For a start, your title is very misleading. I would not recommend, I have ran the same engine for 8 years and its a brilliant reliable wee outboard Yes it is a bit different to other outboards with the clutch system but you get use to it, but if you are going to put up misleading titles in your videos because it comes across as you dont Recommend the engine when really thats not the case, then you have lost a possible sub from me friend nobody likes click bait enjoy your weekend

    • @Reefknotsailing
      @Reefknotsailing 8 місяців тому

      Actually I don't recommend it. I think it's rubbish, it's cheap in price but also build quality. Mine has been back to supplier for over 2 weeks. Also the centrifugal clutch is a silly idea, it's difficult to use and more importantly dangerous. We will be reselling ours once we sort out why it takes 40 pulls to starts and stops.

    • @Gator1699
      @Gator1699 8 місяців тому

      You may have laid it on the wrong side that will bring oil and fuel to the top and choke the carb.🐊Cheers@@Reefknotsailing

  • @itsmePassport
    @itsmePassport 9 місяців тому

    Very noisy

  • @SailingFanatic
    @SailingFanatic 9 місяців тому

    I have that same engine. Two tips: start the engine with the throttle set just above idle. It will start in “neutral” that way. If you run at half throttle you will get 2 hours of run time but only lose about 20% speed

  • @stevebarlow3154
    @stevebarlow3154 10 місяців тому

    I would suggest getting some moveable pan clamps to use on your gimballed cooker. Then you can safely leave your kettle until it boils.

    • @Reefknotsailing
      @Reefknotsailing 10 місяців тому

      Yes thankyou I've been trying to buy, next on the list!!!

  • @dennisfromoz6436
    @dennisfromoz6436 10 місяців тому

    Hi guys....very sedate casual video...thanks. Have you done a description of "Reef Knot ?" Love to know more. Cheers

    • @Reefknotsailing
      @Reefknotsailing 10 місяців тому

      We shall do we've just unpacked the boat and now we can see everything 😊 thanks for commenting 😁

  • @GavinMoor-k7f
    @GavinMoor-k7f 10 місяців тому

    Should say motoring not sailing.

    • @Reefknotsailing
      @Reefknotsailing 10 місяців тому

      A lot of the times we do. A lot we don't. Our goal is to sail as much as possible. On our return from Tassie across Bass Strait it took 40 hours and we motored for 4. Thanks for commenting 🙂

  • @RozKlumpp
    @RozKlumpp 10 місяців тому

    Bought one for the lake. Pushes a 12ft tinny only criticism not Honda quality it's made in China

    • @Reefknotsailing
      @Reefknotsailing 10 місяців тому

      We think the quality is rubbish, engine cover already shows significant damage and the other is the compression kickback is dangerous. And I can't stand the centrifugal clutch

    • @RozKlumpp
      @RozKlumpp 10 місяців тому

      Yes will be handled with kid gloves very gently and carefully LoL

  • @stephenreardon2205
    @stephenreardon2205 10 місяців тому

    We were there 1 January..Killicrankie. great spot.

  • @johncallow22
    @johncallow22 11 місяців тому

    The bitter end should be inside the loop, so that's not a bowline.

    • @Reefknotsailing
      @Reefknotsailing 10 місяців тому

      It's a bowline, may not be tied the normal way but bowline she is

  • @RobertRegan-ie2zm
    @RobertRegan-ie2zm 11 місяців тому

    Thanks you enjoyed this very much will follow your journey.

  • @SMart7751
    @SMart7751 11 місяців тому

    Yep, that’s mostly how I do it too. Occasionally I’ll use another method as required. Nice quick vid.😊

  • @davetaylor73
    @davetaylor73 11 місяців тому

    Yessss

  • @finnegan9197
    @finnegan9197 11 місяців тому

    😒 'promosm'

  • @davetaylor73
    @davetaylor73 11 місяців тому

    Love it guys

  • @aishakerr47
    @aishakerr47 Рік тому

    Go Dani and Pete !! ❤