Відео

Thanks for an illustrative video. I respectfully think this is way more complicated that necessary. Just attach the a spare halyard to the Lifesling line (once secured to the MOB) and hoist. This adds extra purchase and is much faster to complete. With no sails up the boat will be an extra hazard. I would heave to and use motor for fine tuning. Heaving to will protect the MOB from wind and waves and make a more stable working environment for the remaining crew. The added heel will also assist in recovering the MOB. Practising this while clipped in and wearing a PFD would also be a more realistic simulation once the procedure is taught and understood. Thnaks again for the video. NOTE: If Lifesling line is too long, just shorten with a cleat hitch on the aft cleat.

Thanks Margaret, we have been teaching the heave to method on our 35 ft Seawind as the go to mob method. The fastest record recovery has been 40 seconds. I’ve also been teaching it on our monohulls at fairwind Yc with the same successful results. 2 things. First, like the figure 8, it work best when you are beam reach or higher. If lower ,start your engines to climb back up. Second, on a monohull, go 1 to 1.5 boat lengths before the heave to and you can sail back to the mob at 1 to 2 knots without engine. If you heave to immediately when an mob is called and on a close haul you could be too high to drift onto the mob. Then you have to tack or gybe again. Art Toye

The Douglas hitch I think is much better for tying to a bull rail for several reasons. First, if you have long lines you, don’t have to pass the whole length of the line around the bowl rail, which is a pain when you’re trying to disembark particularly if you have a strong current or wind. It’s very quick and simple. Check it out.

ua-cam.com/video/yyMHGvkiYlI/v-deo.html I think this product is better. The MOB can be raised horizontally so will be physiologically more stable. A vertical lift can crash a casualties blood pressure resulting in potential cardiac arrest.

Wow! How absolutely cool is that!!

If only we all could maintain such a calm demeanour when mooring. Nicely done...🫡

thats nothing compaired to Skookumchuck narrows it's incredible

Well I was hoping for a little more disaster but I'm glad you're all safe. Life jackets please..

Looks like big fun! :)

Great day for MOB training !

Nice work, crew!

Nice one!

This is a really good video, thank you! 🙌

Great video, spectacular course. Keep up the good work!!

We used basically the same knot only over top instead of under and we just pulled a loop through twice rather than the whole rope

Great Information.

I use a bowline because it is stronger and eiser to untie after at has been heavily loaded.

Wow! Pretty posh class conditions! NICE!

One crew, usually the one who sees the MOB first should always keep looking and pointing at the MOB as you can very easily lose sight of the MOB even in a small swell. You can also heave-to with just the mainsail and rudder in opposite direction in a catamaran. André in Sydney

This was a fun class!

It’s great to share with some instruction please.

Super cool!

Awesome impeller changing and injector bleeding action goin on!

Thank you but you went way to fast after the first wrap around. I do not understand!!

Great knot tying, but as a commercial fisherman you need be more careful on where you put your feet and hands

Wish their was better footage of that schooner ,

Thanks for the video. Great instructions. My wife and are scheduled to do a week sailing corse on a Catamaran in the sea of Cortez this December. I’m reading my study book and trying to understand Heaving-To. I learn much better watching videos and doing things hands on. I’m not to the part in the book about Man over board yet. I’m curious to see if ASA uses this technique. If you can keep your Witt’s and your headed into the wind, it seems like a quick maneuver to slow the boat and maintain controle then back away from the wind to the victim. I have had some self taught experience with a 16’ Hobbi Cat years ago. I wish I had read more about sailing. There is so much more to it than the I ever expected. I did experience that going into the wind a close haul (I didn’t know it was called that at the time) gets you the max speed! Flying a hull was the most exhilarating feeling of all!!! Thanks

Margaret, thank you for making these videos. So much to be learned from them.

Wow! Thank you for coming out on the boat with us, helping us learn, and putting the photos and video together. I really appreciate what you , Andy, and others are doing to help keep sailors safe.

Hi Margaret, this helped us Sonic’s today. Ended the mutinous bahaviour on the boat. Lol

Nicely done...but I'm not sure why your not using the cleats on the dock?

apparently, she is reversing against spring line. At the same time, reversing means that prop walk is forcing stern away from dock. Nicely done!

I was surprised you suggested putting the sails away. Why not heavy to? This is quick and will stabilize the boat. Once the MOB is secured in the sling I'd heavy to and start retrieving the line. Any thoughts?

Nice event. So cool you made a video!

Exellent mooring!

Thank you for the great hands-on experience! I'm glad that I participated that day.

I did it with the Woodbex plans.

Tremenda corriente q viene del Golfo y bordea hacia el norte se ve

Been there by boat also never a problem at least so far also my boat is very fastb

manico

Nice piece of seamanship!

Criticizing shows they don't sail. Beautifully done.

Chapucera

Not her first rodeo.

Oke, but yoj have to bring the rope back to your ship! Whe. You leave tou ca. do it from the i side.

Can you tell me if the salt water will have any corrosive effects on the metal in the heating furnace?

You make it look like its so easy...

God bless you all

All of you I hope you gays had a great trip

I live here in Louisville Ky