Відео

Slum lord special ? 😅

You have 2 people running the place. They do the best can can. They have a right to take a breather after a rush. If you think it's so "nasty" then "you" clean it up.

They clean when they end their shifts. Sometimes food drops on the floor accidentally and if possible is cleaned up right away, but sometimes later when things slow down.

Uh yea most fast/casual restaurants are like that, stuff falls on the ground, it’s gravity. It’s only a problem if they still serve those off the floor

Only for 35$ for one burger and fry

Ingenuity the mother of invention, nice fact work..

I know it’s fast and dirty, but it’s just an old work van and if it’s wheels aren’t turning, my bank account isn’t growing lol

Holy shit brother! 😅

So far, we haven’t had any icing problems the duct on the top and on the side seem to be flowing sufficient air I think mainly because there is no real duct there if there was 30 feet of piping hooked to it I don’t think it would be sufficient due to air resistance but since there is only the one fitting there hasn’t been a really issue I was going to add some more at the time of install, but the homeowner didn’t want to i’m thinking they’ll probably do it themselves later just to save cash

It’s gonna ice up if you don’t add more supply duct. That round 90 on top isn’t rated 1600 cfm!

I actually like that comment that’s funny. I’m a start using that in the future hillbilly savings account.

Making a withdrawal from the old hillbilly savings acct i see 👌

It's definitely the water propeller. I didn't see anything out of the exhaust either. Cheap fix. Have to pull the foot though but it's still easy. Good luck

Where do you live, in a junkyard?

Yes we took the blower out and apart and took it down to the car wash to clean the wheel

What’s the best way to add or replace the ceiling insulation in a mobile home?

If the fan motor look like that what did the coil look like

I'd like the smell and the pollution in my lungs😋👍😈💪🤣

Nice mann.. Please make a really slow idle and struggled video from this truck Best Regards J.

Nice sound.. Can it stay running at really Slow idle nearly going out but still stay running Best regards J.

Meter looks brand new too Crazy

Spraying soapy water will reveal leaks if lacking the tool.

All 7.3 power stroke vans come with no intercooler and all 7.3 power stroke from 1994.5-1997 come with no intercooler. Only superduty pickups 1999-2003 come intercooled

The pre 1999 7.3 powerstrokes had no intercooler

Problem is it's a ford

Take the plastic terminal covers off BEFORE setting cables.

Almost had me but I noticed it right at the end... Ain't got no gas in it.😅 Something is wrong with that battery, hmm looks like some type of red... IDK ask a professional

Well if u anything but a self employed mechanic u charge em for 2 new batteries and change all the fluids and then tell him he needs a new motor 😂

The positive turmoil caps still on

R u 4 real? U really don't see that? What dummy did that?

Ain't got no gas in it

😂

Bet 90% of the people that watch the video won’t catch that 😊

Get a chevy

You have the red cap on the positive terninals

I want mine completely removed out of the trailer. Doesn't work, it's useless.

But why is the truck so dirty😂

5 degrees 😅, just had -30 snap in Wyoming, hard starting if not plugged in, oil like molasses

I love cold starts. Didn’t do too bad,

That was useless

Since u solved my problem I been having with mine 25hp just like this one I'll help u out im pretty sure your right on that water hole back there there's like a vacuum hose going down to it inside the housing there if you r standing at the back out the motor there that hose will b coming from the left of the engine block down to that hole there n the middle yours must b an older model because mine water shoots out the right of the motor there where the hood latch is if your standing at the back of the motor mines water shoots out beside that latch on the right through a white peace but I'll save u from keep buying the rubber impeller n there I found out that these boat places u take them to wont tell u anything about these types of motors and they will give u a run around on these types of motors wanting u to bring it to them and then fix it how I found out they was saling me a water impeller that looks the same as the one that comes out of this motor they look identical but one thing the rubber impeller that comes factory n these types of motors r thin propeller I call the finger and on the new one they give u to replace this impeller has thick ones and they will get hot and when you tighten the bolts down of the water pump housing it will kinda lock your shaft maki g it hard to turn the shaft that will cause the rubber impeller to get your housing g hot and melt you housing again and u will never figure out why your motor keeps melting the housing of the water pump and then having to keep fixing it because you can't figure it out and u no there going to do this to u at least once to get more cash out of u when these places that fix these types of motors know damn well the thin water impeller goes n there instead of the thick ones I found out on mine I bought new water pump housing rubber impeller and the hole none yards burnt it up so I go to a different place but this time I buy the water pump kit again and they had an old motor out back that they took the motor out of the housing and through the rest of the motor n there jump Pyle so I bought the hole motor housing the lower unit everything but the motor for extra parts for mine but this housing with no motor was like brand new but had been welded on the lower unit I by this housing with no motor from them for $100 bucks but it's a long shaft but all I needed was the lower unit parts they all looked brand new i get this housing home and got all the lower unit gears out of it and it had like a brand new water pump with the factory rubber impeller n it so I compared the two rubber impeller the factory one that was brand new n the old housing I bought had a thin rubber impeller as it's fingers and the new one had thick rubber impeller so i changed the bearing that's under the water pump from from the housing I bought like new bearing under the water pump got the thin rubber impeller that came factory that Nissan put n there and put that rubber impeller n there and it turned the shaft a hole lot better with the thinner finger rubber impeller that came factory n the old junk housing I bought when the new thick rubber impeller locked the shaft when I tightened the bolts back up and I got the reverse gear n the lower unit with bearing brand new and the hole forward gear housing n the lower unit brand new and changed all this from the old junk housing I got from there junk Pyle that I gave they $100 for it made mine brand new lower unit water impeller turned a lot smoother and did not lock the shaft when u tightened the bolts down and I got the bearing under the water pump brand new hope this helps u as these types of motors parts r getting harder and harder to find

take the motors.

Depends on how bad you need the cash . I'm poor so I'd be getting rid of it. Lol

Remove motors and transformers first, evaporators and condensers next...the steel is the last to go.

I'd love to have that old f150

I would weight I Scrap for living at the price and right now sucks

Cuz you're doing it wrong bro You're doing two things wrong... Haven't you played video games😂😂😂

I've been saving any that look newer to try to resell them. Definitely worth more as a working motor than scrap.

Better so strip them down

They don't need u to do it.. They have plenty of illegal and drug addics doing it for cheap....