Huepar Laser Level
Huepar Laser Level
  • 131
  • 825 759
How To Use The Huepar Tools Heat Gun HG02
How To Use The Huepar Tools Heat Gun HG02
Firstly, let's know about the advantages of heat gun HG02
The heat gun HG02 has dual temperature and speed settings - 752°F(400°C) low speed & heat for delicate or detail work; 1022°F(550°C) high speed & heat for heavy duty or high volume work.
Next, let's give a quick overview of all parts of HG02!
Heat Gun
Reflector Nozzle
Glass Protector Nozzle
Reducing Nozzle
Fishtail Nozzle
Use Precautions
● Smoke may appear during the initial start-up due to the burning of manufactured oils. The smoke should disappear in less than a minute.
● Do not touch the hot nozzle in after using.
● Exercise special care when working close to inflammable materials. The hot air jet or the hot nozzle can ignite dust or gases.
● Do not operate or work with the power tool in areas where there is a danger of explosion. The jet or the hot nozzle can ignite dust or gases.
● Store idle power tools out of the reach of children.
● Do not expose the power tool to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
● If you need to remove the power cord, you can use a screwdriver or other tool to pry open the connection between the power cord and the heat gun, and the power cord can be unplugged.
Переглядів: 98

Відео

How to Replace Window Cover Parts for 2D/3D/4D Laser Levels
Переглядів 95День тому
This repair method is applicable to most Huepar 2D/3D/4D laser levels (except models 603CG/602CG). Preparation: Check the screw threads and prepare the corresponding screwdriver. Please note: Different model series of window covers match different types of screws. You need to check the matching screwdriver before repair. How To Detect Accuracy: ua-cam.com/play/PLoElzyEUD12tM3D9pcGMWtyuOFKLaotm9...
How to Install the Battery of the Huepar BOX-1G/BOX-1R Laser Level
Переглядів 52День тому
How to Install the Battery of the Huepar BOX-1G/BOX-1R Laser Level Correctly Please note the position of the positive and negative terminals. Follow the instructions on the battery compartment cover to install the battery correctly. ‘ ’ indicates that the positive battery terminal is facing up, and ‘-’ indicates that the negative battery terminal is facing up. Tip: Although our safety design ca...
Huepar Peace Month💚 Spreading Peace and Warmth!
Переглядів 3114 днів тому
🌍✨ Join Huepar in Spreading Peace and Warmth! ✨🌍 At Huepar, we believe in more than just providing top-notch tools for decorators. We stand for happiness, harmony, and the right to a better life for everyone. This June, we're turning our values into action with Huepar Peace Month. 🤝 Your Support Matters: For every like on this video, Huepar will donate 1 HKD to UNICEF. Each like helps us suppor...
How to Install the Battery of the Huepar BOX-1G/BOX-1R Laser Level Correctly
Переглядів 7221 день тому
How to Install the Battery of the Huepar BOX-1G/BOX-1R Laser Level Correctly Please note the position of the positive and negative terminals. Follow the instructions on the battery compartment cover to install the battery correctly. ‘ ’ indicates that the positive battery terminal is facing up, and ‘-’ indicates that the negative battery terminal is facing up. Tip: Although our safety design ca...
How to Use the Huepar AG2L Laser Inclinometer
Переглядів 3402 місяці тому
In this video we will give a brief introduction to the Huepar AG2L laser inclinometer and let you know how to use it. First of all, let us know the advantages of Huepar AG2L laser inclinometer: Multifunctional design: integrates a digital level, angle meter, and laser line projector. Laser line projection: emits horizontal and vertical laser lines for precise marking, with ±1mm/m accuracy. High...
How To Use The Huepar Tools SD01 Cordless Screwdriver?
Переглядів 1903 місяці тому
SD01 is one of the member of Huepar Tools family. In this video, we will briefly introduce how to use the SD01 Cordless Screwdriver. Firstly, let's know about the advantages of SD01! 1. 4 torque settings for precise torque adjustment for specific applications. 2. 4 types of 27 bits made of CR V-hardened steel up to 55HRC for durability and resistance to wear. 3. Magnetic hex chuck allows for qu...
How To Use The Huepar Pro ZK Series Laser Level?(ZK03CG/ZK04CG/ZK03DG/ZK03CR/ZK04CR/ZK03DR)
Переглядів 1,2 тис.3 місяці тому
Huepar Pro is a brand of laser level developed to a higher standard for professionals with an accuracy of ±1/13 inch at 33Ft. Huepar Pro has upgraded its products in terms of functionality and craftsmanship to meet the needs of a more specialized workforce. In this video, we will briefly introduce how to use them. Matching for remote control: Press the Ⓗ button on the control panel of the laser...
Huepar Pro Laser Level💚Powering Your Profession #huepar #laserlevel #professional
Переглядів 7694 місяці тому
Huepar Pro💚Powering Your Profession Huepar Pro High Accuracy Professional 3D Cross Line Laser 🌎Horizontal/Vertical Accuracy: 1/13 inch at 33 ft. 🌎Laser Wavelength: 505-520nm High Brightness Green Laser 🌎Levelling/compensation range: ±3° 🌎Power Supply: 5V2A/ 8000mAh Li-Ion battery, 10 hours of operating time with all laser beams on. 🌎Protection Rating: IP54 Dustproof, Waterproof, Shockproof, Rel...
How To Use The Huepar Tools Cordless Rotary Tool RT4 APEX?
Переглядів 5515 місяців тому
RT4 APEX is one of the special members of the Huepar Tools family. Our 4V cordless mini rotary tool series Includes RT4 BASIC、RT4 PRO and RT4 APEX. In this video, we will briefly introduce how to use the RT4 APEX. Firstly, let's know about the advantages of the mini rotary tool RT4 APEX 1. The cordless rotary tool has 5-speeds (5,000/10,000/15,000/20,000/25,000 RPM) to meet the different needs ...
How To Use The Huepar Tools Paint Sprayer SG800?
Переглядів 1,3 тис.5 місяців тому
SG800 is one of the special member of Huepar Tools family. Our paint sprayer series Including SG800、SG550 and SG450. In this video, we will briefly introduce how to use the SG800. Let's know about the advantages of paint sprayer 1.Painting efficiency and spraying results are greatly improved, allowing for a smooth, superior paint finish to be applied. 2.By adjusting the paint flow rate, it is s...
How To Protect Yourself From Lasers
Переглядів 1005 місяців тому
Many countries have classified the safety level of laser products, among them, the United States according to ANSI Z136.1-2000 standard and 21CFR 1040.10 & 1040.11 standard, and the European Union according to 60825-1:2014 standard. For the wavelength range of 500nm to 650nm, laser classes are generally categorized into four main groups. The following is a brief summary of these four classes of...
Work your laser magic with Huepar to create order in space! #huepar #laserlevel
Переглядів 7786 місяців тому
Huepar Laser Level - Work your laser magic with Huepar to create order in space 2024 All major e-commerce platforms are available for sale, from Huepar official store. Official website: www.huepar.com #huepar #laserlevel #hueparlaserlevel #linelaser #level FOLLOW US Instagram: / huepar_tools TikTok: / huepar_tools Facebook: / huepartools
How To Use Huepar HM03CG Self-leveling Laser Level #hueparlaserlevel
Переглядів 3,8 тис.7 місяців тому
Huepar HM03CG is a professional MINI 3D laser level. www.amazon.com/Huepar-Leveling-Alignment-Waterproof-Rechargeable/dp/B0B1DSBNZ3?th=1 It is portable, built-in lithium battery,easy to operate and durable due to the metal casing. Its weight is only ‎2.81 pounds. Let's give a quick overviews of all buttons on the HM03CG. 1.Switch Vertical Lines 2.Switch Horizontal Lines 3.Switch Vertical Lines ...
How To Use Huepar Laser Level Outdoors?
Переглядів 1,2 тис.7 місяців тому
Today we will show you a comprehensive guide on how to use Huepar laser level with a laser receiver outdoors.We will use S04CG laser level and LR-5RG line laser receiver as an example. Press the ON/OFF button to turn on the laser level and make sure it is fully charged.Then change the laser tool to the pulse mode,short press the ON/OFF button to switch/return to the pulse mode. The PV of the sc...
How To Use Huepar Electronic Green Rotary Laser Level RL300HVG
Переглядів 2 тис.8 місяців тому
How To Use Huepar Electronic Green Rotary Laser Level RL300HVG
How To Use The Huepar B03CG/B02CG 3D Cross Line Laser Level?
Переглядів 2,3 тис.8 місяців тому
How To Use The Huepar B03CG/B02CG 3D Cross Line Laser Level?
Huepar Self Leveling Laser Level with Pulse Mode, Rechargeable Li-ion Battery HM03CG
Переглядів 1,5 тис.9 місяців тому
Huepar Self Leveling Laser Level with Pulse Mode, Rechargeable Li-ion Battery HM03CG
Huepar 704CG - 4x360° Laser Level Self-leveling Tiling Floor Laser Tool with Magnetic Bracket
Переглядів 2,6 тис.9 місяців тому
Huepar 704CG - 4x360° Laser Level Self-leveling Tiling Floor Laser Tool with Magnetic Bracket
How to distinguish the basic functions of Huepar laser level by model
Переглядів 87210 місяців тому
How to distinguish the basic functions of Huepar laser level by model
Introducing the enhanced upgrade of Huepar's star product S04CG/S03CG/S03DG
Переглядів 2,2 тис.11 місяців тому
Introducing the enhanced upgrade of Huepar's star product S04CG/S03CG/S03DG
The innovatively designed digital laser tape measure Huepar DT30 use tutorial
Переглядів 3,5 тис.11 місяців тому
The innovatively designed digital laser tape measure Huepar DT30 use tutorial
Huepar Laser Tools 2023 New Products Showcase
Переглядів 2,9 тис.Рік тому
Huepar Laser Tools 2023 New Products Showcase
How to Decipher Error Codes for Huepar Laser Distance Meter(LM50A/LM100A/LM120A)
Переглядів 775Рік тому
How to Decipher Error Codes for Huepar Laser Distance Meter(LM50A/LM100A/LM120A)
How to Protect Laser Level by Using AA Battery Correctly and Prevent Corrosion
Переглядів 553Рік тому
How to Protect Laser Level by Using AA Battery Correctly and Prevent Corrosion
How To Use Huepar Self-leveling Laser Level With Integrated Magnetic Bracket 704CG
Переглядів 7 тис.Рік тому
How To Use Huepar Self-leveling Laser Level With Integrated Magnetic Bracket 704CG
How to Use S2-LM100 Laser Distance Measure (Huepar S2-LM60/S2-LM100/S2-LM120)
Переглядів 1,4 тис.Рік тому
How to Use S2-LM100 Laser Distance Measure (Huepar S2-LM60/S2-LM100/S2-LM120)
Laser Level Accuracy Simple Maintenance Operation Guide(Machine Principle)
Переглядів 14 тис.Рік тому
Laser Level Accuracy Simple Maintenance Operation Guide(Machine Principle)
How Can Huepar Guarantee The Precision Stability?
Переглядів 826Рік тому
How Can Huepar Guarantee The Precision Stability?
How to use the tilt function mode and the X-axis adjustment mode of the Huepar DT03CG laser level
Переглядів 2 тис.Рік тому
How to use the tilt function mode and the X-axis adjustment mode of the Huepar DT03CG laser level

КОМЕНТАРІ

  • @elizabethbarthelemy1397
    @elizabethbarthelemy1397 4 дні тому

    We are lost! Bought this expensive lazer level, we can’t use. It’s hard to follow the instructions with the accent of the speaker. It doesn’t demonstrate the outdoors experience. Very frustrating

    • @HUEPAR
      @HUEPAR 3 дні тому

      Hello Sorry for the trouble. May I ask you to fill in the relevant information/questions/pictures on our official after-sales link? We will have after-sales customer service to handle it for you within 48 hours. www.huepar.com/pages/contact-us Thank you very much for your understanding and hope to help you deal with the problem.

  • @LordJersyBizarre
    @LordJersyBizarre 9 днів тому

    Is it too expensive to add another button to switch modes?

  • @scottrennie6896
    @scottrennie6896 Місяць тому

    The tape measure itself is terrible as the writing is tiny. They should have put the reader on the underside. I can't read it

  • @rockyrowlands3652
    @rockyrowlands3652 2 місяці тому

    Difficult keeping up with the instruction. Confusing.

  • @prospeedmotors
    @prospeedmotors 2 місяці тому

    And how do you activate pulse mode then?

  • @MiscellaneousMichelle
    @MiscellaneousMichelle 2 місяці тому

    Awesome video

  • @matt.m4310
    @matt.m4310 2 місяці тому

    Fine adjustment Dial?

  • @mirdallke2
    @mirdallke2 3 місяці тому

    dlaczego to produktu ie ma w europie?!!

  • @mirdallke2
    @mirdallke2 3 місяці тому

    matko bosko - poprcyjcie nad jsnoscią przekazu i oznaczeń bo człowiek błdzi jak dziecko we mgle w tych waszych oznaczeniach

  • @mirdallke2
    @mirdallke2 3 місяці тому

    szkoda ze niema informacji czym od siebie różnią sie poszczególne serie produktów np co odrózna seria S od serii P???\

  • @rjackson64840
    @rjackson64840 3 місяці тому

    I would prefer to hear a real human narrate

  • @roj3519
    @roj3519 3 місяці тому

    Can anyone tell me if pulse mode on this unit can be activated while in manual (pendulum locked) mode?

  • @rockyrowlands3652
    @rockyrowlands3652 3 місяці тому

    Err, …the above video is done outside and the bottom video is done inside where the laser beam will show up clearly….not the case when working outside.

  • @Dunninbean
    @Dunninbean 3 місяці тому

    Any one have any idea what the difference is between the Huepar S04CG and the Huepar S04CG-C I cannot find anything on the additional letter -C?!?

  • @fernandorivas6472
    @fernandorivas6472 3 місяці тому

    What's the difference between S04CG laser level and this one?

    • @ufvj217
      @ufvj217 2 місяці тому

      I'm trying to decide which one I want out of those 2 as well, did you ever find out any differences between the 2?

    • @fernandorivas6472
      @fernandorivas6472 2 місяці тому

      @ufvj217 not at all. I just went ahead and bought 2 of the S04CG

  • @cornelichim4661
    @cornelichim4661 3 місяці тому

    Do you have for sell only head glass tz2226? Huepar S04CG-NB. I remove protection to have 360 and i dropped an object on part how reflect the green lights

  • @liobagues
    @liobagues 3 місяці тому

    Pequeño y resultón 😃😃

  • @oldunion
    @oldunion 3 місяці тому

    I bought the mount, it's as bouncy, floppy and saggy as shown in the video. The adjustments are not smooth and have a halting studdering effect as you move them. It should be me made from aluminum. I recreated it using photography mounting equipment.

  • @pinponka
    @pinponka 3 місяці тому

    Not working

  • @madalinpert5515
    @madalinpert5515 3 місяці тому

    What's the difference between P04CG and S04CG?

  • @Wiseolegranny
    @Wiseolegranny 4 місяці тому

    The computer voice is not good

  • @CaprichoCapricho-zh5og
    @CaprichoCapricho-zh5og 4 місяці тому

    Cual es mejor S4DG o 704 CG

  • @shyamn.sundar9865
    @shyamn.sundar9865 4 місяці тому

    Does this have a longer range than S04CG?

  • @user-sm4rx4mk4c
    @user-sm4rx4mk4c 4 місяці тому

    Is there a video with a full enclosure that show how to use this product from start to finish. Steve

  • @blluzar
    @blluzar 5 місяців тому

    Jaký lepší a jaky je rozdil? Huepar S04CG 40 m -S03DG 40m?

  • @blluzar
    @blluzar 5 місяців тому

    Huepar S04CG 40 m -S03DG 40m? Jaky je rozdíl?

  • @cesarromeiranunes
    @cesarromeiranunes 7 місяців тому

    Very poor engineering on the part of those who manufacture the plastic parts. The parts wobble 1.5 millimeters due to poor plastic engineering and misalign the laser 5-10 cm at 5 meters when moving the fine adjustment, making it impossible to make a fine adjustment, which defeats ALL MARKETING regarding the functionality of this mount. As for the aesthetics, in theory it looks functional but when it comes to functionality it's practically a VERY BAD product. Buy it only if you want to study how a bad product is made, which can ruin a company's image. However, the Huepar laser I bought seems to work really well! --- Muito má engenharia por parte de quem fabrica as peças em plástico. As peças abanam 1,5 milímetros devido à má engenharia de plásticos e desalinham o laser 5-10 cm a 5 metros de distancia, ao movimentar o ajuste fino, tornando impossível fazer um ajuste fino, o que derrota TODO O MARKETING relativo à funcionalidade deste suporte. Quanto à estética, em teoria parece funcional mas no que toca à funcionalidade é praticamente um MUITO MAU produto. Comprar apenas se pretender estudar como se fabrica um mau produto que pode derrota a imagem de uma empresa. No entanto, o laser Huepar que comprei parece funcionar mesmo muito bem!

  • @oc_geek337
    @oc_geek337 7 місяців тому

    It seems it ONLY works in the shadows... in sun light it's KO

  • @egidijussamulionis6107
    @egidijussamulionis6107 7 місяців тому

    I hate it to use it ,because of very thick laser line at the buttom it's very thick maybe 5mm

    • @Tephnos
      @Tephnos 7 місяців тому

      Just use the top or bottom of the line? Trying to do things in the middle of a laser line is never going to be accurate even if it was a 2mm line.

  • @cynthiashores57
    @cynthiashores57 7 місяців тому

    The instructions in the booklet are poorly written. Need to let a teacher write them!

  • @BGdev305
    @BGdev305 7 місяців тому

    What's "New" about this one?

  • @user-vl2rp7gj9v
    @user-vl2rp7gj9v 7 місяців тому

    جيد

  • @cassianojose1917
    @cassianojose1917 8 місяців тому

    Comprei um o feixe de luz nivelador está bem fraquinho onde comprar?

  • @HidingZebraTube
    @HidingZebraTube 8 місяців тому

    Useless

  • @CarltonMonster
    @CarltonMonster 8 місяців тому

    Utter nonsence. Could you be so kind to explain not that first digit is for series, but how "series" actually differ?

    • @Tephnos
      @Tephnos 7 місяців тому

      B series stands for budget. P series stands for professional (hence the battery packs for onsite jobs), 7 is I have no fucking clue, and S is their premium line.

    • @mirdallke2
      @mirdallke2 3 місяці тому

      @@Tephnos super ale czym do licha odróżnia sie Premium od Profesional? nurtuje mnie które urządzania maja kompesatory o elektroniczne a które mechaniczne

    • @Tephnos
      @Tephnos 3 місяці тому

      @@mirdallke2 Premium is more focused at DIYers, Professional is for pros on worksites.

  • @dumitru5061
    @dumitru5061 8 місяців тому

    Excelent!👏

  • @lawncharir
    @lawncharir 8 місяців тому

    It's so close to being helpful! But it's still not, what are the different series? With all due respect, even your happy customers will admit they have no idea how these lasers are differentiated, I'm sitting here holding off on buying one of your lights because I can't parse out the differences in them all. How is clearing this up not a bigger priority?

  • @ElsadayElohim
    @ElsadayElohim 8 місяців тому

    The best

  • @sgt4204
    @sgt4204 8 місяців тому

    Do you manufacture your levels?

  • @danielfinao
    @danielfinao 8 місяців тому

    Why don’t give a actually demonstration.

  • @soundwave3739
    @soundwave3739 9 місяців тому

    This laser level looks insane ❤

  • @rickoneill4343
    @rickoneill4343 9 місяців тому

    Please add a chart with all models to your amazon postings and webpage. That way we can compare to see what is new and the best.

  • @dannylinders6157
    @dannylinders6157 9 місяців тому

    It would be nice to have a page on the website explaining the differences between the different series.

  • @nsposato303
    @nsposato303 9 місяців тому

    I can’t use the tripod because the ceiling is too low to fit another yellow section in and when I try to pull the yellow section up while pushing down with my foot in the foot pedal, the ceiling skid doesn’t reach the ceiling before the tripod legs are wanting to come off the ground. Now what do I do

    • @HUEPAR
      @HUEPAR 9 місяців тому

      Hello Thank you very much for your support, You can replace it with a long tripod. If it is too low, you can first get it to almost the same height, and then use the pedals to increase the height. It does not necessarily have to be all the way up.

    • @HUEPAR
      @HUEPAR 9 місяців тому

      If you still have problems, please feel free to contact our customer service for help. Email address: support@huepar.com

  • @rosspeplow
    @rosspeplow 9 місяців тому

    My Huepar S120 consistency measures 9mm under from short or long distances. How do I calibrate that?

  • @theshop5331
    @theshop5331 10 місяців тому

    crap, get a human to speak to us

  • @structe5098
    @structe5098 10 місяців тому

    Legit made un new zealand

  • @Kivivideos
    @Kivivideos 10 місяців тому

    How do we use the mount included in the box?

  • @donahueedison4487
    @donahueedison4487 10 місяців тому

    Where can i purchase batteries for 503CG line laser?

  • @johnmorrison4224
    @johnmorrison4224 11 місяців тому

    Worth it!