Відео

The kit we installed was a 4" lift, but the truck came from the factory with a 2" lift since it's a Trailboss. So altogether, the truck has 6" of lift.

It may block a little air from moving through but we haven't seen any issues from this. We also haven't seen any issues with it blocking the outside temperature sensors.

This is a 6" Rough Country Lift.

Great question Ryan. The front height of a 4" BDS coil over kit is roughly the same as that of the 4" normal kit, and yes it can be adjusted a little higher or a little lower since the coil overs are adjustable. It should be noted also that the coil overs are not recommended to be adjusted on the truck, and should be put in a spring compressor, and have the spring tension taken off of the adjusters before setting them to the desired preload.

Thanks for the question! We never got pictures of this specific truck, but we have pictures of a truck built very similarly to this one (slightly different wheels). I can send you those pictures! Reach out to everestliftedtrucks@gmail.com and let us know you commented on this video on UA-cam and we can send those pictures over to you.

@@everestliftedtrucks that’s okay , I was really interested in this specific truck only because I have it as well in the same color and wanted to see those specific wheels 🛞😅 I really appreciate the offer though have a great one!

Yes, this is under 8 feet!

Thank you!

Thanks for watching!

Thanks for the thumbs up!!

They're nice trucks, whether they have a lift kit or 6.5" lift for sure!

GM has a bunch of vehicles that were built but waiting on chips all sitting waiting to get the chips, so it is probably waiting to get retrofitted. The long wait you've had will make getting the Canyon even better!

Thanks!

Hi Collin. That is a great question. We apologize for the delay in answering it. We haven't had any issues with air flow restriction!

Thanks for the comment Edward. We apologize for the delayed response! This Canyon has a 6" Rough Country Lift, 20x9 +0mm wheels, and 295/55R20 tires.

Yes! The truck requires trimming. We do a full norcall on the truck to make the wheels and tires fit.

Thanks for reaching out Thomas. We apologize for the delayed response! This Canyon has a 6" Rough Country Lift, 20x9 +0mm wheels, and 295/55R20 tires.

woah a gas over a Duramax I've never heard someone say that in my life lol

Yes, the 6" lifts look great! If you're driving by and decide to talk through lifting a gas we have some Everest specialists in-house at Lighthouse! Please stop by :)

Why what’s wrong with diesel trucks???

I just bought this truck last Month, I love it Thanks again!

Hi there. We are sorry it's taken us so long to get back to you on this.. better late than never?! We have never tried fitting the factory retractable steps on a non-power step truck. We would recommend the AMP power steps as a better option. Hope this helps!

Hey Mark, thanks for your comment. We did give it about 2 years and are happy to report that we haven't had any issues with air flow restriction!

Thanks for the input, we may have to make one! Even if it's a little late..

Hi there Sapiens. Thanks for reaching out. We want to apologize that our response is so late. This is actually mounted with the factory holes on the crash bar. Rough Country does have special brackets for the lightbar.

Thanks for your input.

Henry Tracz that's the 30 inch single row by rough country

Hey Henry. We want to first apologize for our delayed response. This LED light bar is the 30" Rough Country Light Bar. Dylan was correct.

Thanks Dylan!

Hi there, I first want to apologize for the lapse in response time. Better late than never?! Rough country has treated us well. They are a cost effective lift and ride like one. They have tremendous customer service and are great to work with.

Hi there. We apologize that it took us so long to get back with you. Gm has a multiple page document on how to run the wiring. It is very time consuming.

@@everestliftedtrucks yea 4 years is a long time to wait for a reply from you. I was starting to get tired

Thank you!

Thanks for reaching out to us. We want to apologize for the delay in responding back. This is a 7.5" Rough Country lift we installed on this Canyon!

Hey again Greg! Again we apologize for the delayed response. There are multiple switches depending on application. GM does provide a multiple page document on how to run the wiring.

Hey Greg! Thanks for reaching out and we apologize for the delayed response. The installation on this is VERY involved and the pricing is greatly dependent on your local mechanics labor rate. If you'd like us to help you out with that, please let us know and we sure can!

@@everestliftedtrucks No worries. I bought one 4 years ago and installed in myself

Hey Greg, again our apologies that this is so late. We don't have all of the answers to these questions since we don't own the truck (this was built for a customer of ours). If you're still interested in knowing the answers, we can definitely look into this. Just let us know! Thanks for asking such great questions!

Hey Hector, thanks for reaching out. We apologize for the late reply. This Canyon has a 6" rough Country Lift, 20x9 +0mm wheels, and 295/55R20 Tires

We apologize about the late reply. Glad you got it to work!

GM makes a switch that replaces the current headlight switch. It splits the Fog lamp button into two. Call and ask for Loren Shock to get the part, and installation instructions. If you are close we can install for you. 309-266-1919

Switch - GM (23458495)

GM makes a switch that replaces the current headlight switch. It splits the Fog lamp button into two. Call and ask for Loren Shock to get the part, and installation instructions. If you are close we can install for you. 309-266-1919

How bout if ur truck didn't come with for lamps

GM makes a switch that replaces the current headlight switch. It splits the Fog lamp button into two. Call and ask for Loren Shock to get the part, and installation instructions. If you are close we can install for you. 309-266-1919

Switch - GM (23458495)

Hey Seth! Sorry for the delayed response to this question. We apologize it took us so long to get back to you. This is the super 40.

Everest Lifted Trucks - Can this power steps fit or be install on a 2017 Toyota Tacoma 4doors short bed and how much ?

Grant, The curved led light would fit, but it is not the same curve as the bumper.

thats the stock bumper, they just removed the air dam that attaches to it.. its the same thing for the fullsize models. Most ppl remove them when lifting to add ground clearance and appeal.

Hey Mike, sorry for the delayed response. This is the factory bumper that came on the truck. If you have more questions about it, we are happy to answer them!

+jason 3MP They are 22X12 Fuel wheels. They rubbed a little bit, but we fixed that by trimming a bit of the inside fender.  We are located in Morton, Illinois. 100 west Jackson st 61550  Also check out our webpage at www.lighthousegm.com/Everest-Lifted-Trucks

+Everest Lifted Trucks Thanks, appreciate it.

Flowmaster American thunder.

+Keith Grimm thank you

Thanks Keith!

+Derek Johnson If you do not have a lift, I would stick with 265/55/20 or smaller. This truck has a 5" lift, 18X9 wheels, and with 285/55/18 tires we had to trim just a touch.

+Mr Bobby Brown The total package cost is $8250. If you would like different options on the truck you can always change them out.

Mr Bobby Brown is the truck 4x4? Mine is 2wd and I want to install a lift on it.