Відео

12speed chain is compatible with 11speed. 11 & 12 speed systems need narrower chain. Dunno how long in chainlinks that 18 inches is but that you can check yourself in use and shorten it accordingly if needed.

Why do you ask stupid questions?

I've had plenty of Lowepros bags and I really like them. But never had a bag where the shoulder straps are attached back of the bags opening entry like Tenba made it here. Tenba makes nowadays a version 2(V2) of this same backpack and they have changed it so that the back opening opens only and shoulder straps are attached to the rest of the bag. And I also complaint about storage pockets missing in the inner back opening and now in the new version 2 Axis they have added some pockets. I'm still using this backpack and has held very well, but maybe there is something in the complain because they have changed so that all the weight is not on the zipper. Maybe your expertise vision was that this version 1 of this Axis was the pinnacle of this backpacks design but like me, others and the manufacturer Tenba thought otherwise. And they made it even better no thanks to people like you. Edit: kevinsteele edited his message afterwards. Earlier he was talking how lowepro has made bags like these ages and my complaints were unnecessary. After my reply he edited the message like he already knew what i told him.

Not quite but it is closer than you might think…

Sorry for late reply. My Timbs are just fine no loose stiching or anything.

In the video i have the same combo, so it will work. Still have the same setup, exept the shifter is now 12sp Shimano SLX. So everything is now 12sp but the cassette.

Try wearing 2 pairs of "liner" socks instead of one pair of normal socks.

Yes i have the version 1 of this bag. Nice to see that they have improved the version 2. Any new pockets inside the main compartment flap? I still have this backbag in use, held up nicely and everything is working.

@@Gravelish Yes, they relocated the laptop compartment to the front exterior, and added a 6" x 10" zippered pocket to the top of the interior main compartment flap. The overall build quality seems quite good, although I'm not sure why they don't have consistent zipper pulls throughout. (Some have short knotted cords, while others have a small circular plastic pull with "T" logo. Both types work fine.)

If that derailleur can handle 51teeth in the casette it will work just fine. I have that same cassette and deore derailleur works well. And recently switched to a 12speed SLX sifter works flawlessly with 12speed derailleur and 11speed casette.

@@Gravelish Thanks!!

Yes. Don’t tell anyone🤫

30cm

Yes i had it like that before. Now i have 12speed RD and 11speed casette and 12speed shifter. Works flawless.

Few good options have given here in the comments before doing anything irreversible. 1. Soften the leather stiching/douple layer leather with pliers 2. Lace down to 4-5-6 holes. 3. Use douple layer socks during braking in. Hope these helps, Timberland won’t.

Both short and longer center column are carbon fibre. Longer one weights in 72grams and shorter 46grams. I’ve been using the shorter one just because it makes it easier to strap on a backpack. Also this is very lightweight tripod so using the centercolumn in a higher position makes it a bit top heavy.

@@Gravelish thank you very much. Much appreciated.

Well kinda because the previously white areas are black. I took that red colorflip off because it was not good in daylight.

Thank you and greetings from Finland.

Thanks sm dude that j fixed this annoying ass problem

@@ethanjolly9732 no prob glad I could help 👍. That problem was terrible

This worked! Didn’t need to cut em

Mate just did that magical difference

OMG, this saved me, such an easy and logical fix. Tysm

Better look this dude, his method work perfectly, and u don't cut in the leather "Fix Timberland - Boots hurt Ankles Repair (without cutting the leather)."

Can you describe how you cut it In more detail? Thanks

What do you mean break? Break in or break the leather apart?

​@@Matt-vh9vs DO NOT break it apart! I looked at a yt video "Fix Timberland - Boots hurt Ankles Repair (without cutting the leather)" from the chanel "Angry philosoph" and his method worked just fine for me on my new timbs. CARE if it's new boots, unlike him, to put tea towel or protection between the clamp and the shoe leather or else it could damage the leather 😉

@@mayori35 thanks I'll try before I return! Do you think all the boots are the same ?? Or some models won't have that problem?? Quality control issue?

@@Matt-vh9vs I think boots are high quality, it's just leather when it's new... so I think we don't have all the same ankles to feel this tiny part

@@mayori35 ya I agree they are high quality that's why I'm reluctant to return them . I've been trying with the pliars squeezing the leather but it's not working out for me

You do that.

Thanks. i made the music myself.. maybe this will open some new career opportunity.

26 x 4.7”

I have pretty much the same combo, so it will work.

At 22seconds there is that douple layer of leather stiched together. And 42seconds it has been cut out. You will figure it out when you watch it again and then inside your Timberlands..

Thanks!

Thanks a lot for commenting Ray! Happy travels to Scandinavia. There are many traditional knife brands in Norway/Sweden/Finland from what to choose of. This Helle Alden is one of my favorites.

It depends on the use but looking at the specs of the Samyang, for me i’d probably get it cause it has shorter focusing distance 19cm vs 30cm and somesort of weathersealing. But if these features are not important, i would go with look&feel, which lens pleases more image wise.

Razor blade.

@@Gravelish no I mean what was the cleaner?

I did not have any alcohol based cleaner. So i tried camera lens cleaner and savett wet wipes, these did not work. Razor blade did the work.

I have 10-51t 11sp casette and the same RD so yes it should work.

Thank you for encouraging comment and for your support! Nice to hear that you liked the review. Have a splendid day! Greetings from Finland across the globe!

Just adjust it for the 11s casette and should be ok.

And you need also a 11s shifter sir?

Yes 11speed shifter also and if you don’t have 11s/12s chain then that too.

Ok thanks

Sounds exactly what i had before the operation😕

@@Gravelish Thick ass socks are my only saving grace right now lol. I tried to squeeze the fold with plyers and squish it down. NOTHIN... So. i think imma just have to keep long boi socks around. lol

@@Metaljesuslol I can feel your pain. Hope them long socks help enough to soften the leather in time!

Few things. This is a Norwegian knife not Finnish. Second, real hunter and dead animals don’t give rats ass who is the maker of the knife or it’s origin country. As long as the blade is sharp.

@@Gravelish Norwegian and Finnish knives are exactly the same knives. They share the same steel, the same sharpening and geometry only the manufacturer differs. The knives are definitely not bought or chosen by the prey but by the hunter. All knives have a sharp blade, but how many of them can complete the skinning of a wild boar dipped in mud and with several centimeters of hard subcutaneous fat? I appreciate 12C27 steels but can in no way complete the skinning of a boar. It loses its edge very quickly and also quickly turns into a saw. Its geometry is the most unsuitable for skinning. To explain and not to misunderstand the knife you presented is a perfect knife in every way but in my personal opinion it would never be my first choice in hunting (skinning).

You'd be pretty hard pressed to find a serious hunter that doesn't own a scandinavian knife. I'm also sure they aren't processing all their reindeer with some imported rambo knife either.

@@-o-The-Duke-o- Let me believe that serious hunters can exist all over the earth and not just Scandinavia. About Rambo style hunting knives, these belong to the stupid American culture, the bigger the better. There are hunters on the internet who skin or actually operate on game with an Abalone. I personally use a Fallkniven H1. It is a very sturdy knife but the vg10 steel breaks easily.

I paid about 74 euros for this one. Thanks for watching!

@@Gravelish Thank you brother

Very helpful thanks😄

Ouch! 😬

The skin on my ankle rubbed off it look like two bullets hoes 😂when it scab up ima Fs pill it