Відео

It's not that difficult you just need the right set of tools huh. Doing mine next week I already ordered a heat gun, solering iron, thermal paste etc.... Your video is a life saver I'll be playing this on loop while I'm at it.

Hello. I'm having the same issue as I just hear the same sound every time I click the shutter button. And the display showing the Err. I think this is closest to my issue as I know the mirror will go up if I manually move it up. I'm just not sure about the shutter... How do I know if this is the exact issue? Thanks in advance!

Merci pour cette vidéo très instructive... 👍

hi, wanna know how to deal with the stripped screw?

Dang, mine just started to break some months ago after almost 5 years of hard use. I thought I could repair it as good as new but with this kind of heatgun needed I guess its impossible for me.

Mine doesn't AF. Do you know where you can buy new AF motors?

lol I tried to fix my 2ds but the screw is stripped and now I can’t open it

I managed to repair my d90 thanks to this video. I encountered the same problem with the rear display on the first reassembly but by repositioning the 2 electronic cables the display reappeared. It is still better to have the service manual for the screw number. This seems essential to me for reassembly because many of the screws are different. Thank you so much!

Thank you, I repaired my D90. Pinion was loose, it was not cracked. I used loctite glue and it is fixed.

I have a hacked 2dsxl, the blue light turns and stays on, bur whatever I do the screen doesnt turn on. Do you know any way to fix it?

Well, I tried and failed. I have neither a heat gun, nor a variable temperature soldering iron. Tried it with what I have, a wood burning iron, which is functionally identical to a soldering iron. My idea was to turn it off once it started melting the plastic, and turn it on again when it got too cool. Plastic ended up sticking to the iron bad, making it difficult to get the new keyboard in place due to all the missing plastic. Had to melt the waste plastic onto what was left of the tabs to form the rivets again, and even then they were brittle when cool. After that I find out the keyboard I installed was faulty, or I damaged it during my shoddy install (several keys don’t register unless pressed very hard and double type sometimes). I’m going to put a Bluetooth keyboard on top of my keyboard and call it good. I don’t think I’ll attempt this again without better equipment 😅

Wow amazing

Thank you sir, I have little water damage a1466. There is backlight problem. Corrosion on D7701, L7701 and burned/rusted XW7720 button. Everything other is good, no damage/corrosion (LCD connector, capasitors C7796-97-99, even back side U7701 every one is good) I dont understand XW7720, What is your aim to scratch near XW7720 button and what did you do there? Please help me figure out this schematic about L7701----XW7720----D7701 (and back side U7701 IC). THANK YOU!

Hello i am trying to fix my own camera can you tell my what fuse to buy so i can buy the one fits to my camera

Do you know how to get in-between the front lens element of this lens there's some fungus. Some guidance would be appreciated

Why they made the keyboard replacement so complicated 😤

I'm having the same issue with my new old stock D300. The camera is literally new, it has +/-200 shutter actuations. This seems to be very common issue with Nikon cameras and the fact that Nikon has done NOTHING to address it is simply beyond me. What a crap company!

Can you do a video on how to properly install the plastic volume slider? I can’t seems to make mine fit!!!

Was able to fix my D90 today with this video! 📷 To keep track of all the screws, I used the timestamp from the video when each was taken out and arranged them that way. So I could always go back on the video and locate where exactly it belonged. Thank you for the clear and detailed instructions!

Compré está mierda de maquina, que solo me duró dos sesiones de fotos. Es por lo que he visto la basura más grande jamás creada no me voy a molestar en repararla, la mierda hay que tirarla.

The only thing worrying my about doing this are the plastic rivets. You think its possible to remove them like you did with a blowdrier? I saw in another video someone removing the rivets with a box cutter and then soldering when reassemblying, but I was unsure if he was using solder and if thats ok for the laptop.

Hello, my recently bought TXQ saber has some similiar issues but im not a welder nor an electronics engineer, i have no idea how the cables and stuff works, and I have no tools to do all this... Currently my button is stuck as if its pressed it (although its physically not), the only way for me to turn of the saber is by removing the battery and putting it back in

Considering the price at introduction in 2008 was $899.95, Nikon should be ashamed of themselves for using all those plastic-gears..

Can you show me where the cmos battery is?

Are you really doing repairs while wearing a luminor panerai are you crazy ? 😂

May I ask, what amperage that fuze is? I have a similar situation, my screen backlight doesn't work, but when I project some light on the screen, I'm seeing the menus. LE: Just saw the fuze properties in the captions.

My cable is also broken like your cable😢

Bro my laptop screen not showing but when I clean my ram and re enter then my screen showing. But after shutdown this problem again came..😢😢

My tamron is stuck between 400 & 600. The aperture is working. What was the fix for the zoom being stuck?

How much does the keyboard replacement cost

Can i just send mine to you? 🤣

Oh this isn't something I'll be doing. Might as well throw the whole god damn thing away

I've got a similar camera (d60), so I guess it'll be similar. I'll tell you when I give it a try

Sir iska moter by kaha se kare Koi online link do please

insanity how difficult to replace keyboard

I got my hands on a purple one, worked for the summer then it stopped booting, itll boot once in a blue moon, but yheres a stripped main screw, so ill see what happens, cuz these housings oem arent cheap

Hello - just wanted to let you know that your video helped me be successful in replacing the gear for my elderly father's camera that we couldn't afford to pay to get fixed or buy a new camera - even second hand. I don't know how much longer my dad will be around but I know that with the time you took to make this video to help me fix his camera I will be left with many more special pictures and memories after he's gone. Thank you very much for your time and detail in making this video.

Not difficult task?omg 😅

Thanks for the video, this just happened to mine, and yup the spur gear was cracked at the shaft

Is the Tax Man after you ? Why no talkie ?

I have the same problem, can someone help me?

Thanks for the video, i spilled water over my keyboard about a year ago and with your tutorial i was finally able to fix my laptop and everything works perfectly thanks so much !!!!

i have the same 2ds XL model. It took a Little fall and now It wont turn on like in the video.

But what was his problem?

Thanks alot for a detailed walkthrough i did same and achieved great results

Thank you very much for this video. My D90 had the same failure symptom and I disassembled it carefully following the procedure in the video. It was indeed the engine pinion that was cracked. I found one for €3.07 and reassembled my camera following the video. I just lightly re-greased the gears and it's back like new. Sincere thanks! 😀👍

Thank you @riskifixes - have already had loads hours on this since you fixed it!

Yo I have the exact same problem with the exact same ds I thought it was impossible to fix, glad to know there are people like you out there

Mine has same problem but scared I would get screws mixed up. Guess I will have to pay the 167.00 to have a shop do it.

omg...