Відео

Don't know about the price pls check Ali baba or Ali express for new rectifier

Might be two conditions with your battery No 1 due to deep discharge your battery locked 2ndly your battery BMS might got faulty or just having simple alram You should press the reset button for 5 to 8 second after 1 minute again press that reset button hopefully alram (Red light) remove but if still on your battery hase been locked which only unlock by its battery software which only available with authorized

Thanks for watching

Wa I'm not much aware about UA-cam policy regarding share Whatsapp number. You can visit home banner of my channel hopefully in that way you will able to contact me. Thanks

It's a value driven from formula

20 x 1.44 x 0.8 = 23.04 Then why u are showing 28 A/Phase ?

Thanks for watching

Yes of course. Safe range to drain battery maximum is 70 to 75%

Yes you can bypass BMS but it's not recommended. You can replace it's BMS to make it compatible with your invertor. Normally available in range of 30K to 35k in market(Pakistani).

Nei Bhai

Brother we don't deal sale purchase. So can't help you in this matter

Manual can't help you. The problem is in protocol of BMS which is not compatible with your solar controller. Now the only solution is login into your battery and increase its charge coefficient.

@@TechPoweredLife my problem is that I have four batteries in parallel without using the paralleling the bms. So they charge and discharge at their own free will. I want to parallel the batteries and for that I need the manual

Yes it can, but communication will show only can't control charge coefficient and other parameters

Dear can you pls explain what exactly you want to ask

Sure. Pls let me know

@@TechPoweredLife , well I’m not an expert with Huawei, I’m using the batteries as a power bank in a Off-Grid PV System, I bought it from a supplier here in Guatemala as an alternative lithium battery, but, those are programmed to charge at 0.15C (15Amp) - 56V. This is ok, but the installation place sometimes doesn’t have long time to get charged the batteries, (Cloudy days, rainy…) then I need yo increase the 0.15C factor to 20-30, I can charge limit the power of the charge controller to keep the 0.15 pre-setting, and only unlimit when we need a fast charge…. it’s a Victron System, I’ve made changes in the SMU but it doesn’t change nothing, the forums in the internet says that I need the Inspire, But I don’t know where to get It, if you can help me to know how to get it or help me reprogramming, please.

@@TechPoweredLife I asked to my supplier, and they don’t solved it for me, and no one else answered/help me. Thanks

Sure what exactly you need to increase its charging coefficient

@@TechPoweredLife how can I get the enspire Update? If you have it, could you share it with me please? 🙏🏽

Es un cable RS485 simple que normalmente se utiliza para la conectividad a Internet.

Utilicé un cable RS485 simple para la comunicación, que es un cable Ethernet simple o un cable utilizado para la conectividad a Internet.

Me dieron estos parámetros para la batería carga 53.2v Flotante 52.8v Descarga 46v Están correctos

@@TechPoweredLifeme dieron estos parámetros carga 53,2 flotante 52.8 y descarga 46

It's official tool anyhow I'll provide after taking approval from ZTE, if they allowed

@@TechPoweredLife if sharing the tool is not possible, could you share the communication logs?

Please share details Your rectifier model or what controller are you using to controll lithium? What is your batteries charge coefficient right now? Cable size for lithium?

Hola, tengo una batería igual , pero no me carga , podrías indicarme como la pones a cargar, o que inversor utilizas para cargarla ? Gracias

You need to increase its charging coefficient. Login into battery through its controller or directly to battery through its BMS tool

How could I do it directly from the battery?

Did you need a special cable direct to the battery? To be able to do it, I am from Chile and I have not found anyone who can solve it, only answers from you.

You should connect the battery to it's compatible controllers. In other case you need to login into battery and increase its charge coefficient in order to get more charging current

@@TechPoweredLife Thank you very much for your reply !! How can I log in to the battery? With what software? Could you help me? I have 3 of these zte batteries and each one charges me at 500w.

Just providing technical information

G bhai

Which battery dear ?

Model ZXDC48 FB100B3, I cant find it anywhere....