Відео

I built my DIY chicken cage using the following dimensions, and it works great for me. You can customize it as needed to fit your specific requirements. Wood size: Thickness: 1 inch Width: 2 inches Cage dimensions: Bottom side: Length: 3 feet 11 inches (includes an 11-inch feeding tray) Width: 3 feet Height of the feeding tray: 16 inches Top side: Length: 3 feet Width: 3 feet Cage height details: Height of the cage: 2 feet Overall height of the cage: 5 feet Additional tips: Install the iron mesh so that it doesn’t hinder the eggs' movement. Ensure there’s enough slope for the eggs to roll easily. I hope this helps

@robomakerstoolkit3928 OMG thank you so much for your time to write this, it's more than helpful

Thank you for your interest! This high-tech hen cage is actually part of a personal project and hobby of mine, so it's not for sale at the moment. I really appreciate your enthusiasm though!

In my experience, this tire inflator is still working well. I use it for domestic purposes only and never run it for more than 7 minutes at a time. I wouldn't recommend it for commercial use, as it's not suitable for big vehicles. It needs a 12V DC power source, so keep that in mind.

@@robomakerstoolkit3928 does it show current air pressure??

When I connected the machine to the tire, I noticed that it initially showed the current air pressure. After I set it to 33 psi and turn on the machine, the air pressure gradually increases and displays in real time. The air inflator automatically turns off when it reaches 33 psi, but it can also be turned off manually. However, a few seconds after turning the machine off, the display shows 34 or 34.5 psi. I think this slight discrepancy is normal It can be adjusted manually with the machine. I also think the tire pressure displayed while the machine is running is not quite accurate. I am not an expert, just sharing my experience. 😊

@@robomakerstoolkit3928 thank you so much

Sorry, it's not for sale. It is a DIY project.

"Happy to assist anytime!" - Drill bit sizes: 7/64 and 1/8 - Nails: 2" nails, 1* 1/4" nails, and 1" nails - Self-tapping screws: 2" screws and 1" screws - Self-drilling screws: 1" screws -pvc pipe for feeder:(I repurposed a 6" rainwater gutter with end cap ) Working with hardwood in my DIY project, pilot holes were absolutely crucial to prevent any damage. With the help of my local shop owner, I found the right drill bits and nails for the job Thank u

@@robomakerstoolkit3928 thanks for the answer. much appreciated

Thank you for your interest, but I'm not currently selling the DIY chicken cage However, you're welcome to watch the tutorial on my UA-cam channel and make one yourself!

Thank you so much for your interest in my DIY project! I apologize for the delay in responding; Wood size Thickness - 1inch Width - 2 inch Cage dimention Bottom side Length 3feet 11 inch (11 inch feeding tray length Width 3feet, height 16 inch) Width 3feet Top side Length 3 feet Width 3 feet Height of the cage 2feet *Install the iron mesh in such a way that it does not resist the movement of the egg *Make sure there is enough slope for the egg to move

Thank you so much for your interest in my DIY project! I apologize for the delay in responding; Wood size Thickness - 1inch Width - 2 inch Cage dimention Bottom side Length 3feet 11 inch (11 inch feeding tray length Width 3feet, height 16 inch) Width 3feet Top side Length 3 feet Width 3 feet Height of the cage 2feet *Install the iron mesh in such a way that it does not resist the movement of the egg *Make sure there is enough slope for the egg to move

If you want to create a makeshift roof, use materials like plastic or waterproof fabric to shield the chickens from rain. Ensure proper ventilation to maintain a comfortable environment for them.

For layer hens, it's generally recommended to provide at least 2 square feet per bird. Therefore, a pen of this size could potentially house around 4 to 5 layer hens comfortably.

Number pls

@antukrishnans8549 Thank you for reaching out! For any inquiries, please feel free to contact me via email at robomakerstoolkit@gmail.com. I prefer using email for communication. Looking forward to hearing from you!

No

No

No

I bought from local market. It is also available online

ua-cam.com/video/maqEVKpEhHY/v-deo.html

🥰

240 V

Please check the link dl.flipkart.com/s/dYgbwruuuN

❤️

🥰

👍

🥰

Please replay

yes

Ok thanks

Take a look at this TechSupreme Combo Of W1209 + 12v 2Amp Adapter + 3inch fan+ 1 Dc Connectors Screw TypeFor Diy Incubator Electronic Components Electronic Hobby Kit on Flipkart dl.flipkart.com/s/N2in!RuuuN

👍

🤝