Відео

Guess it depends on how your head is shaped.

17 hours to heat up 😮

You could also put the added insulation first then the inflatable, if not using inversion heater. Just in reverse. I added large bubble rap in winter. Just keep taped side up. Adhesive can wear down… and need retaping. But, really liked your suggestion.

Use more than one!

How much did they pay you man

Which case did you end up choosing?

Useless

I'm glad you can do this , but I see so many ways this could go wrong with a average guy / in the front of your car that plastic that is so close , I can see the 4x4 or tire moving and you have a thousand dollars dammage to your car . probably a better choice for me anyhow is my truck which is much higher and putting the end of the 4x4 instead of the side . less chance of the tire flipping into the car , with a truck it would probably hit the bumper if it did flip up not causing as much dammage if any

Bad tutorial friend 😢 side fender broken...danger

I’m on year four with mine. It’s no longer a blow up. It also no longer runs the same pump. It was good for two years then the tub started leaking, the lid deflated super fast, the lid holder ripped and the heater needed cleaning. Lessons learned after that. I custom build a new hot tub from an ICB tank. Plumbed the air to the bottom and made a ring of pvc inside the tub for air bubbles. The rest of the unit got torn down and mounted to two holes in the ICB tank for water circulation. I changed to a different, easier to get 120v pump and wired it so it works with the control panel. Replaced a few other easier to order parts and cleaned the heater up and resealed it. I build barn wood stairs over the pump to get in the tub that can be removed for maintenance or repair. I insulated and rapped the ICB tank also with barn wood. Made an insulated lid that has two handles. It can be moved by forked vehicles as the ice tank is skidded underneath. I’m at about 2k spent all together. 1 on the unit originally with everything and another 1 on the new build and new pump. Funny how they show me this video after I just got out of the tub. Darn ninja you tube… ✌️🚛🇨🇦

I’ve used this method to change tpms before

I was told that is the high beam , where is the low beam?

You could also use the rotor of the car you're changing tires on and lower the jack with the rotor on the edge of the bead till it pops off it also wouldn't try to flip the wheel as easily. You also might want to lay something down to not scratch the wheel was said before

Has anyone filled the lid bladder with spray foam?

I switched ON the ice maker but not function and the light of power not lighting. Please help me I'm from Tanzania

Now, how to find the puncture!

This worked! Thank you so much!

ياصديقي هاذي طريقة قديمة من الثمانينات ولكن شكرن على كل عملك نتمنى لك التوفيق

Yet another guy that doesn't know what he's doing!!!

THANK YOU, THANK YOU! I wasn`t expecting much. This is great and yes, I subscribed.

are the lenses stabilised? I bought a cheap replacement online and the lenses wasn't stabilised when looking through it.

Buenísimo, 😃👍🏼

could also put a hose over ur kitchen sink, blast it on hot, and put the other end in the hot tub.

i filled mine halfway with hose water, and the other half, with buckets of hot water from my sink faucet lol, worked great. went up 2 degrees a bucket

Your math works. Double the output wattage in your water to heat it twice as fast.

The junk yard will do it for $3.00

I love intelligent ingenuity! What a great idea. Thank you for sharing!

Is it avialable at amazom?

do you mean 5000 or 1500 watts not degrees? pretty sure you meant watts

Thanks for sharing 👍 😮😊

Lol, now I just need a second car because we've removed the tire from the first car..

Thanks for pointing out the sensors. I cleaned mine. A little calcium build up. I used my finger nail to scratch that off, then made sure the ice basket was out of the way of the sensors and it started to work again. The ice full light went off.

Never been to the Midwest but I’ve always wanted to at least know the difference between Detroit and Chicago style pizza so thank you for this video

Okay question.. if you do this, and just let it run all the time, once the machine runs out of water, and just sits there trying to find water when it's actually empty, would that not cause a separate issue with something else? I'm clueless and genuinely am looking for help with this.

Thanks! Exactly what I needed to see. The tip of unplugging the lightbulb before you take it out of the socket was money! I was able to do it one handed. 👍🏻 👍🏻

Wait til your heater craps the bed. Mine lasted two years. I have the Intex and there’s no replacement. I bought an immersion heater and it works great

Nice! This showed up first on my Google search and this will be the way I use tomorrow to get a bad tire off of it's rim. Thanks!

This method is acceptable if you're not planning to reuse the tires. If you deflate the tire as much as possible with the valve core is still installed, you greatly reduce have a risk of it launching itself. If you have clip on weights it's a good idea to remove them right after deflation

Result! Many thanks - I have the same noise on my '88 - like a can with a few stones in it. I'm going to check the pulley on mine tomorrow! Awesome!

Thank you!!! This helped!!!!!

Awesome man you made that look simple and easy you’re a pro👏🏼👏🏼

Also I found out that when it says full ice even though it’s not full push the on /off button then push it again and it will start up and then it will say’s full ice again then hold down the select button down about 10/12/ secs and then it will start off again and start making ice but it may keep making ice until it runs out of water and so don’t over fill the water tank or it my over fill with ice

I connected my propane camp shower to mine and I can get it up to 107 degrees in no time .

How do you drill into the metal brackets?

Thank you!! Just had k wipe mine off really well. I clean it super regularly but didn't think to specifically wipe those down!!

Worked a charm, gbu and a massive thanks buddy. 👊

So i did exactly what you did, but now all the lights are blinking. The manual said it could be a "disruption of the power source". Did i screw up the wiring or is it something else?

I noticed if the sensor is still working that placing a clear plastic straw (I had to trim it about 1/2 an inch) to connect both sensors prevents the beam from being broken by ice getting stuck at the top and the machine will keep making ice until the reservoir is empty, the plastic shield will be raised slightly once the water is done. I will save the fix in this video for when the infernal sensors finally burn out. Thanks again for taking the chance and showing us how the proverbial sausage is made!

the problem with the magnet lock is it messes with camera stabilization

How are those lenses holding up?