Відео

Not with how the motherboard orientation is in this case. Even though the screen is magnetic it doesn't rotate.

Nice, How did you do the loop? Distribution plate?

@standard_hardware I have barrowch CPU pump reservoir combo in it.

Thank you for pointing it out 🙏 My mistake.

Yes 🙌

No

@@letterAsigma LOL I know. IT was a joke

😂

Deepcool's heatsink: 😋😋😋

it's £73 in the UK, current pricing 👍

@ damn

😢 hopefully not forever.

@standard_hardware hopefully not, but we have no idea when/if they will be allowed back in the USA

Yep, you can switch between CPU, GPU and PSU but PSU only works with certain ones. Has some good info on.

😂😂 No right or wrong way.

@standard_hardware Bull. The side panel the PSU fan should be FACING the side panel, the case even has a mesh cut out that (coincidently) is shaped just like the PSU fan face. Gee, wonder why that is. Why would you want hot case air entering the PSU??

@@insertnamehere4419 Have a good day 🙂

@standard_hardware he's right, so you run from the conversation

​@@DeadPiixxel I just didn't want to get into it, what's the point. He is right, the PSU fan should be facing outward for optimal use. However in this case, when you orientate the PSU at the top you cannot have the fan facing upward as the 3-pin internal cable sticks out the side of the case and then you cannot close the side panel.

Thank you for the comments. You misinterpret what i meant. If you use a full lenght GPU like i did, you cannot position a atx or Sfx-l in the original position to have a top mouted fan due to cable clearance. I have built in this and the Ch160 and it has the same problem. If you use a shorted GPU say upto 280mm lengh or shorter you can get away with using the larger PSU's. Also use custom cable lengths, with short cables and you will have more room. Hope this helps 🙏

@standard_hardware hmm. There are a few videos of large cards being used, with a top fan. Two I have watched with a 4090 FE.

😂

Feel ya on that.. so stupid

I didn't find anything wrong with the quality. For the price range, the panels weren't flimsy when installed, maybe slightly when off but not enough to be classed as poor quality. I would recommend the case. You won't be disappointed.

@standard_hardware thx!!

Thank you for the comment. It's a great case for tight spaces. I would fully recommend it. It is easy to build in. Hope you get one in the future 🙏

So you need a proper sfx power supply for a top fan mount?

@@mcfly855 (Copied from another reply) You have two options, either use an SFX PSU, or use a shorter GPU. The Asus TUF 4040s is a long card 301mm, if you used a shorter one the cables would have somewhere to go. Then you can run a top fan. Hope this helps.

Yes, due to the psu being on top. Why i highlighted using a SFX PSU so you can mount a top fan and have airflow either direction 👍

@standard_hardware So with a sfx psu you could mount it vertically und then there is space for a fan on top?

@@michaelbu1317 You have two options, either use an SFX PSU, or use a shorter GPU. The Asus TUF 4040s is a long card 301mm, if you used a shorter one the cables would have somewhere to go. Then you can run a top fan. Hope this helps.

I would 100% replace it if this were my daily build. But this goes with the theme of the build 😀

From Asus Website: Asus Prime AP201 MicroATX Case. I do have a mini ITX motherboard installed, but it can take a Micro ATX Motherboard as well 😊. Hope this helps.

@standard_hardware ahh i see

😂 thank you Tavarish

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂да ладно, специалист «маникурист» 🥲

Thanks for the comment. CPU temps avg 65 in gaming and 79 in stress testing. GPU averages 62 in gaming and 70 in stress testing. I'd 100% have a front intake fan, use a sfx PSU, and not an SFX-L, and it will fit. Also, get some custom length cables will save a lot of space.

Thx for getting back to me

With that build you could have done rear intake and top exhaust and test the temps.

@@ninjakajooislive i have moved front fan from that 2 tower cooler and put to back, so no exhaust fan at case and its fine. GPU works on its self as i set IT up in AMD software and all cores in CPU -20. i have played BF 2042 last night and temps are really good. Max MID 70s. I'm happy from the build

As i was rush to make build i didnt realize how big cooler will be and saw some other mitx builds and i think i will be changing cooler to around 67mm tall and lian li lcd fan

Cheers for the comment, I see what you did there 👀😂

Thank you 😊

Thank you 🙌

Depends on the 4080S dimensions. The case will fit a GPU up to 338mm, but you will need the psu bracket in the top mount. A smaller PSU would be better if using the full 338mm. The Asus 4070S Tuf is 301 mm a chunky card, so you should have lots of space and space for fan intake from the bottom of the case. Thanks for the comment. I hope the build goes well 🙏.

Haha, i left it on purpose. You are the first one to notice 👀. Will take it off in the next build. Thanks for thr comment 👍

@@standard_hardware no worries just something I saw haha

😢

that card will definitely not fit this case. the CH160 is limited to 305mm GPUs, the Sapphire Nitro+ RX7900 XTX is 320mm in length. source: i have that card.

Thank you for the comment 😊. Yes, I agree with your opinion on the front fan and PSU placement. This is not the optimal layout for thermals and was done for aesthetics and working with what I had. Also, as per the comment below, the max GPU clearance is 305mm. The TUF fits with a 2mm gap to the front pannel, hope this helps 👍

@@jens468 oh dang. That's too bad that, case look really good.

@@standard_hardware ty for replying. I really like the aesthetic of that case and my friend had similar taste to mine, he probably would love that too. Too bad. I've been looking at Fractal Torrent Nano but I'm not really sure. 😁 Anyway thanks again.

It was very painful to get the cable management to a reasonable point. Yes, I did flip the PSU to the front and sacrificed the front intake fan, but temps are more than comfortable at a max 68/74 on CPU and 69 on GPU in gaming. The TUF GPU made it really difficult to cable manage but I used the channel behind the GPU to run any excess cable lengths. Hope this helps. Thanks for the comment.

Yes, it was. I highly recommend anyone to buy some custom length cables. The ones in the Corsair kit are too long, and you have to do a lot of work to make it look reasonable. Thank you for the comment 👌