Відео

@MannyBlaze031 thanks, it's looking alot different now than when I originally recorded this. It's a 2016 Icebear Little Monster PMZ125-2

@timmysv1k94 just search "grom wheels" on ebay and buy the wheels that come with the fender lift kit, or buy a set that comes with tires too. I wanted to get as close to stock fitment on the 14s but couldn't find a matching pair of 120/70 & 130/70s so I got these Continental ContiTwists. I'll actually talk more about the setup in a future video.

@scaggit I'm can't wait to get started on it 🤫 im just waiting on parts. Stay tuned for that

​@BuuThatClone where did u get the zs190 engines from? I'm trying to get one cheap.

@@scaggit i got 2 for $1200 shipped from alibaba. Took about 5 weeks by sea

@@BuuThatClone 1200 including freight or u gotta pay that seperate?

@@scaggit like I said, $1200 shipped for 2 by sea

@@silent122bob milfs love it 🤣

@@MB_JOSH4159 check steady garage to see what ZS/Daytona parts they carry that you might need. I've had 0 issues with em thru all my orders thru em for my build prior to the ZS

@scaggit this is my first of my 6 clones so it's been my first project. Im still tryna decide if the second engine i bought is gonna go on my stunt bike build or dirt bike build. I'll figure that out later after I "finish" this build

@BuuThatClone just got myself an Orion rxb125. Wanted the 190, but was 600 more. Got the 125 to get riding. Do a 190 swap later

@scaggit i wanted to get a Daytona Anima 190 4V but for a couple hundred dollars cheaper I grabbed the 2 ZS190 2Vs, plus they shipped sooner than any Daytona I could get at the time I purchased

@BuuThatClone fact. I mean unless ur tracking it on a track, the ZS190 is just fine. 16 hp and plenty of torque for a minibike

@scaggit I'm aiming for a 100mph clone, so I plan on building up a Daytona Anima 190 4V to a Daytona Anima 225 4V and see what comes of that. Then at some point figure out forced induction on one of my bikes. I'm building in stages and I'm considering the ZS190 2V as my "Stage 1". I was already doing 69mph faithfully out of my 125 setup, so I have high hopes for the ZS/Daytona swap

@AM_Da7eVen now that I'm officially moved, I can go back to ordering parts. New headlight setup just came in too, stay tuned for that 🤫😈

@@MB_JOSH4159 I'm a Lil upset about the loss of footage, but I'll be OK. I'll figure out things as I go

@@felixvalvaneda2285 it's on my consider list if I can stumble upon one for a steal

@@MB_JOSH4159 I'm in jersey

@zayk8833 thanks I appreciate it. That's a stock Icebear Fuerza PMZ125-1 swingarm with Grom 14" wheels. I have 6 clones so I've parts lying around to add my personal touch.

@@BuuThatClone oh that’s sick bro! Can’t wait to see when your finished with it. I’m eager to see where mine will be at by that time. Just got new parts in today I give it a few months to have all carbon fiber with an extended kit and new wheels

​@zayk8833 this one is my first build and it's going on a year as of November for me to get it to this point and I've loved every moment of it

@zayk8833 this technically isn't a clone as it doesn't run grom plastics, but it technically is as everything under the plastics can be swapped with grom parts. It's a 2016 Icebear Little Monster PMZ125-2

@shawng9541 5.75" I was gonna upsize to a 7" but I couldn't find a RGB one like i had in that size so i swapped to a 5x7 led headlight. If you wanna see that setup, most of my videos show my current headlight setup which I plan on changing again as well as the taillight.

@8bitretropro shoutout to the guys in the clone groups that continously told me to start a UA-cam, they inspired me to start uploading here too instead of just the groups

@MB_JOSH4159 check out pt 2 if you haven't already. It's coming together piece by piece everyday, I'm still waiting for a few things outside of the zs190 engines themselves but I think it's almost ready. Stay tuned 😏

@fredbarron90 im tryna find a SSR Razkull tank, i hear they hold about just over 2 gallons, being the biggest stock clone tank out. If you can, just buy a whole parts bike with a bad engine or thats been dropped and use that tank. I'm specifically looking for a SSR Razkull with good plastics for those and the tank

@user-rn3vz8we9k yea that's me, I finally decided to start a UA-cam. That video was actually my first upload. Check out some of my other videos and stay tuned, I already have a few videos I'm working on as im getting parts in

@@molecularconcept1318 i be busy 😭 i barely have time to think sometimes

@zayk8833 I've been slowly building my bike up to this point, i just didn't have any memory to record. Now that I have the memory though, I'm putting out whatever info I can as I've done & learned so much since I bought the bike last November. I'm still editing pt 2, but i just got packages 2 days straight, so stay tuned see everything come together

@julianmarz i can't wait till the this engine comes in. I got parts coming in for the next few weeks to install before the engine. Stay tuned 🤜🏾🤛🏾

Good job

@zayk8833 search grom wheels on ebay, they're the 14s

@@BuuThatClone brother do they fit though????? If any adjustments need to be made I will just go for 12s 140/70/13 rear 130/70/12 front

@zayk8833 they bolt right up just like real Grom wheels do, you just won't have a speed sensor so no working speedo or mileage tracking unless you get the magnet style or retrofit your sensor setup to work with the Grom wheels like some people have done

@@BuuThatClone wow bro thank you so much!

@zayk8833 just doing what I do best 💯

@zayk8833 no, those are stock OG Grom Enkeis

@zayk8833 those are real OG Grom Enkeis, I got em for $200 with no tires or wheel bearings, but freshly painted. The tires are Shinko SR723 whitewalls 120/70-12 & 130/70-12. I'm actually looking into a different set of whitewalls tho

@zayk8833 the setup is 120/70r14 & 140/70r14 Continental ContiTwist. And if you mean are they tubeless and can be plugged if you caught a nail, yes.

@prehn2828 i used to keep a key in the gas cap and leave it half locked until I did that. All I did was flip it and drill a hole thru from the bottom of the cap. You'll see a circled area, that's where I went through. I used a bit that was just big enough to snuggly slide the hose through to vent. I always know when I overfill my tank now when gas squirts out of the line 😂

Prolly from this month till December

@lewis3589 I daily mine about 20 miles a day on a 55mph road. The blue bike with my old 125cc setup I could get it up to 69mph all day everyday, but the red one with the same setup off of the blue bike only goes 59mph. It really depends on your commute honestly, but I see no problem with dailying a clone to save up for something better. Winter time seems to be the best time to buy anything on 2 wheels depending on your location.

@MB_JOSH4159 I've come a long way in almost 1 year of riding and I'll definitely say, I miss my daily 😭😭😭 i was doing 69mph FAITHFULLY, now I'm doing 59mph on my Vader and it's not the same. But she'll be back better than ever for sure.

@@t2d2420 i mentioned it in the video, but my bike is 5 pin. I'm actually waiting for a few more 5 pin & 4 pin CDIs to come in so I can test out in my Vader as well

@BuuThatClone I ordered 2 4 pin just like on in vid but takes a month to get here so we shall see

@t2d2420 yea, I'm waiting for 3 pin cdis and I think 2 different 4 pin cdis, along with 2 zs190 2v engines and a shit load of other parts. Stay tuned on the build and subscribe if you haven't already, I don't have a set posting schedule, but I'm constantly working on the bike, so I always have something to record.

@@scaggit wakanda package we talking? 👀🤫😂

@@BuuThatClone Wakanda Forever then! Lmaoooo

@scaggit 😂 drugs are for fools, my nails just get long and break before I cut them 🤷🏾‍♂️😂

@@BuuThatClone what drugs we talking bout tho. Cuz I like my weed n mushrooms. Both r linked scientifically to help certain individuals in small dosing. Aka perfect natural non pills from a whack quack.

@clonestarr3466 well this is a 30mm gy6 intake manifold. I have matching studs coming in i think tomorrow, but imma end up switching to bolts for serviceability. I'm thinking I'll have difficulties with the studs if I have to remove the manifold.

@@t2d2420 can't post links on UA-cam for whatever reason

@@BuuThatClonewhat website was it from I need one for my icebear feruza

@@J-xn2uu Aliexpress, look up 5 pin cdi and grab the blue Zimosa 5 pin cdi

It’s a bd-125-8

@twosmoke3608 this is a 2016 Icebear Little Monster PMZ125-2, it's not necessarily a clone, but a mini Ducati Monster

@clonestarr3466 same family, but different setup. The stock engine for this bike is setup as N1234. I've since swapped in 2 different 1N234 125s off my other clones

​@clonestarr3466 I have the boom vader

@clonestarr3466 wait till you see the next mod update video I release sometime in the fall. Right now, that one's chilling in my garage sitting on 14s waiting for a new heart, so I'm on my latest purchase for now. If you haven't already seen it, check out my first upload as that's as close as a current mod video as I'll upload until it's running again.

@@UTWREC4LL the grind don't stop even during my smoke break 🤷🏾‍♂️🤣

@@BuuThatClone real shit

@GromGeekz I like the ergos of this one more than any gen Grom or the Z125 Pro. I almost bought a Z125 and the seller also had a 22 Grom I got to test ride as well, they just didn't feel like this one to me.

Why are you mad bros just showing his bikes off and your stalking his acount😂

@@twosmoke3608 🤣🤣🤣 it's funny how some some Grom owners actually don't mind the clones in the mix, while others want em all destroyed and sent to Pluto

@GromGeekz when I wanna get into fuel injection, a Z125 Pro, TNT135, Papio SS or Grom will be my go to, depends on what I can get for whatever my budget is at the time.

​@@BuuThatClonehe's just being a baby😂

Clone is actually better lol

@GromGeekz still fun af tho 🤷🏾‍♂️🤣. My blue Little Monster goes 69mph all day everyday,I can only get this Vader up to 61mph with the same setup I took off my Little Monster *minus the CDI*

Race me 😊

@@VaderVlogs125 just wait till I break in my zs190 🤫

@Operator-fq2fn these Aliexpress 665mm adjustable forks were worth the price I paid. Now compare em to a real set of Ohlins or Racing Bros forks and idk what to say. But I am running the Ohlins Performance Fork Fluid

@pharals963 stay tuned for when I upload my tunable cdi video. For that bike, I have the rpms limited to 10k

@SpAcEcruizer203 ebay, just search grom wheels

@@BuuThatClone bet thanks mon

@SpAcEcruizer203 they're Grom RCB 14s. I plan on getting at least 2 more sets to have at least 4 sets of 14s with 4 different tire setups. I'm just tryna figure out what works best for my multiple bikes 🤷🏾‍♂️😈 And that's not a Fuerza PMZ125-1 although i do have one of those too, it's a Little Monster PMZ125-2 with a Fuerza swingarm. I put my stock Little Monster swingarm on my Fuerza as I plan on making that one my stunt bike.

@@BuuThatClone got u I love some good wheels I love my shinko white wall too its so good I took it off until I paint it ima do either a leprechaun in the hood build or the gravedigger scheme 💪🏼💯🔥🔥🔥🔥🔥 minis for the win

@SpAcEcruizer203 the Continental ContiTwists that I put on the 14s, I plan on getting the whitewall version in 12s, they just didn't have them in 14s. I can't seem to find any whitewalls for the 14s, but imma keep looking, that's how I found the 14s after 4 months of searching

@@BuuThatClone go shinko bro I'm telling u there like a cloud

@SpAcEcruizer203 my current rear 130/70 SR723 whitewall flat like a car tire vs the front with the same mileage around 2-3k. Imma just pay the premium for the ContiTwists and see how long they last me

@@fredbarron90 i plan on doing an up to date mod video soon, im just waiting for my engines to come in from China, but I can post my mod video as of i believe May. I haven't done too much since then

@fredbarron90 If you haven't already seen it, I uploaded my pt 1

@Thegrimsleeprs it's the stock tank for the bike. If I can find one, I plan on swapping to a SSR Razkull tank as ive read its a 3 gallon tank. If I can't find on then I may get a custom tank made for it

@@brianmosleyb9104 ebay