- 4
- 20 225
Engine Addiction
Приєднався 23 вер 2019
CMP Offset w/ iPhone(96-98 GM truck)
Here’s the cheapest and easiest way to check your CMP offset if you’ve got an iPhone. Once you get the right scanner and the right app it ends up being pretty simple.
Link to Wi-Fi scanner:
www.amazon.com/BAFX-Products-Reader-Diagnostics-Devices/dp/B078K54MT5/ref=sr_1_6?crid=K76FAVBAPZ15&keywords=bafx%2Bobd2%2Bbluetooth&qid=1654811078&sprefix=Bafx%2Caps%2C204&sr=8-6&th=1
Link to Wi-Fi scanner:
www.amazon.com/BAFX-Products-Reader-Diagnostics-Devices/dp/B078K54MT5/ref=sr_1_6?crid=K76FAVBAPZ15&keywords=bafx%2Bobd2%2Bbluetooth&qid=1654811078&sprefix=Bafx%2Caps%2C204&sr=8-6&th=1
Переглядів: 1 689
Відео
3.0L 3G Eclipse Spark Plugs(EASY WAY)
Переглядів 10 тис.2 роки тому
EDIT: I forgot to mention the EGR exhaust tube will need to be disconnected as well. I deleted mine when I put on headers and forgot to mention it at the time The absolute bare minimum required to get the intake out of the way to replace the back 3 spark plugs. It’s not as much as you’d think! Spark plugs are supposed to be torqued to 18ftlbs and the intake manifold bolts are supposed to be tor...
LED Cluster Lights for $11(3G Eclipse)
Переглядів 8 тис.3 роки тому
Installing LED lights in the instrument cluster, clock, and climate controls! Bulbs you will need: 6, size 194 for the cluster 3, size 74 for the clock 2, size 74 for the climate controls www.ebay.com/itm/T5-T10-Red-LED-Instrument-Panel-Cluster-Gauge-Dash-Light-Kits-For-Honda-Accord-/143048539632?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
ECLIPSE 2.0 Parts Car and Build Description
Переглядів 1873 роки тому
ECLIPSE 2.0 BUILD 3G 2000 Eclipse GT 3.0 Automatic Subscribe to follow along for this build. Will be doing a full manual swap, redoing and restoring the paint, and many other small projects!
Thanks for the video, it worked on my vehicle, the information is very useful
dude no way I was contemplating dropping a grand for a good scanner that could read this simple data. Thank you!
Will this read transmission codes?
I have a 97 k2500 and my cheap ANCEL Bluetooth won’t read trans codes
You definitly do not need to take apart the cluster sand the inside of the dash. I've had green and red bulbs in my dash and both have appeared the right colour just fine without doing any of that. Maybe the only exception would be if you wanted white LEDs
Little late to the video but I didn’t sand the orange off the back and it looks nearly identical
What color light did you do because I want to put blue lights in mine but I don't wanna sand that back peace I hope you respond
@@Chase.Gaming.05you dont need to sand the back of it unless your going for a bright color like white
@@clawsonkink8241 ahhh thank bro
Can't seem to find this package in blue
I found a few of similar ones on Amazon
Ive done this job a time or two! Its a chore!
sounds like a hell alot of work for changing only the spark plugs 😢kinda regret getting one now
How did you get the needles to normal on the cluster?
Hmm
What are all measurements i need
I seen in a video this is your old Eclipse you got back, which is awesome. Seems like when these cars need something they need everything. I just finished my 03 GT Spyder up today, did: timing belt, water pump, front and rear valve covers, spark plugs, wires, new idle air control valve, new egr solenoid, bank 1 sensor 2 O2 bypass, took the fuel temp sensor off a Lancer fuel pump and soldered it to my fuel pumps sending unit. She's all done now running great no codes. This is my second 3g, and I've had a 2g and a 4g but the 3g is my favorite so I had to pick up another (and keep it this time). Great video bro.
Good video, horrible job!
Yup im taking it to the mechanic lol
Hello, I’m not sure if you know that to do that test RPM Hass to be over 1000 RPM😊
How can I find out the sizes of the bulbs for a different Mitsubishi? Will the sizes of the bulbs be written on the holders or even the bulbs?
Yo is there any screws/bolts for the clock cover I can’t seem to remove it?
Question, what size are the tiny long bolts?
Donde compraste las luces?
Hey did you ever figure out how to change the fog light switch color?
What happened to the videos you promised? Did you sell the car?
Nope, still daily it. Just other things taking priority right now. Trying to grow my business, third kid on the way.
👍
What spark plugs did you go with and did you gap them
NGK Iridium are the ones, I usually put in my 02 mitsubishi eclipse gt. They are pregapped.
If I remember right I went with NGKs, always a safe bet. Almost all spark plugs nowadays come pre-gapped, so I don’t gap any plugs unless it’s old enough to have a carburetor, and even then I rarely gap them
Very helpful video
Glad it was helpful!
Good video! Just a tip for some. I have an 2003 GTS Spyder, some a couple things are different. For example the fuel injector connectors below the manifold need to be disconnected before lifting up the manifold(I guess the connection wires are shorter than the ones in the video. Also there's more to disconnect if you want to change the valve cover gasket...such as the hose off the brake booster, the throttle cable plate, and a couple more things. This is to gain more space to get the valve cover off.
Thanks for the tips!
Hi first off I want to say great video thank you for the share. I wanted to know if I have to get same color lights as the orange that on panel, can i get 194s white or blue lights. Also do you have video on replacing light in the shift selector? Thank you and Happy belated thanks giving! :)
Great video, thank you for it
Glad you liked it!
id recommend putting the needles for the main gauges while the key is turned to on, so that way the Spidle behind them is set to zero (there is a spring that sets them lower when the power is off to help rest them on the stand offs) . take the car for a drive after, to check if they are too tight or loose. and you'll be set. no need to be sitting there fighting them for 30-45mins finding the correct position
Great advice!
Great video....so appreciated thanks. I have question do you know how to fix or install the lights on the Auto shifter stick. The P, N, D, R does not light up. Any input would be great. :)
no light
@@xboxsk8 really....the shifter used to light up....got me thinking its a 2001 eclipse spyder. It been in my driveway so long ...so finally getting out this summer I just noticed that LOL ? Are sure ?
anybody know what spark plug socket needed for the job
Just a regular 5/8 Spark plug socket
Hi where did you get the dash cover?
CarID.com, bought when I got my wheels and tires a while back
Hi where did you get the cockpit mat?
CarID
Service Engine and SRS light delete, that got me going but I'm removing my SRS light now too. Nice video, I have some blue LEDs I'm going to try.
I need to do this, I’ll probably do it when I fix my clock and cigarette lighter. I’m hoping I blew a fuse and not messed up the ground, but I’ll check it either way
Btw, where did you find that dash cover?
They sell them on eBay just search up dash cover for our eclipse I got mine for $20 the other day
I bought if off CarID a while back. My dash has whole chunks missing haha
Does anybody know if some company makes dashes for the 3g or if someone trustworthy has them?
I’ve seen some companies make custom carbon fiber ones, but they’re pricey!
Question for ya, My blue leds are very dim after installing. I’m guessing I have to send the back of the gauges? Also When your needles glitched out, it was because you pushed them on too hard??? I don’t want to have that problem with my gauge needles if I do this. Thank you! Video is very helpful!
Yes I just pushed the needles on too hard. It doesn’t take much to put them on. Have you tried the dimmer switch? The LEDs are still variable like the regular dash lights
I thought the button for the fog lights didn't light up guess mine is just burnt
u dont need to do all the extra shit if you have red lights
True, but it might look redish orange. I wanted mine as red as possible
Broooo this was a lifesaver! I had no idea how to get the radio or thermostat lights out at all and this was awesome! Thank you!
Glad it was helpful!
What car stereo do you have
It’s a pioneer AVH 2800 or something like that. I bought it at Best Buy way back when. Runs my subs and my back up camera really well. It’s been a great stereo. Double dins are super easy to install on these cars
@@engineaddiction4557 thank you! What subs do you have as well? Been looking for one to fit my eclipse
@engine addiction Is it possible to have Dab radio?
Holy Light Exposure. Really needed the blub sizes with a video to confirm, so thank you very much for this!!
Does any one by any chance know the other sizes for the lights on the gauge cluster?
Bro thank you for making this video 🦾❤️So much help
What you gone do next bro
Manual swap, still have to pull the trans and everything out of my parts car
@Engine Addiction is your car a GT or GS? I got a GS auto and been wanting to see someone do this with all the parts needed etc. I had my car since 2013 and don't have a clue how to do it. Plus it's pretty expensive
Great video %100
All these things he did are easy as hell 😂 why don't you guys buy a service manual u can look smart took 😆😆😆😆😆
What service manual has a step by step for doing aftermarket led lights?
@@engineaddiction4557 it be it was just a joke but really he could learn from it
How did you install the double din?
No adapter kit needed, it’s super easy they just bolt right in
What size are the bulbs for the gear indication and cluster warning lights?
Loved the video man, very helpful. Can't wait for more videos!