Відео

Anyone doing this job and you’re struggling with the coil packs, THEY ARE NOT THREADED put some gloves on and shake it side to side while pushing up on it. When you go to put them back in put a small amount of dielectric grease on the top of the coil and bottom and it makes it way easier next time.

what

In order to avoid the bags rubbing against my turn signals i took a threaded rod to make sure there's a certain and fix distance inbetween, that's Point nr 1, point nr 2 is that for some reason the first time i rode with them on my MT07, somehow the right one must have been in contact with the exhaust and nearly burned through the fabric... The seller said i was the first one with this kind of problem but i hardly believed him

Thia shit is crazy, i got myseld one of these and without laying my hands on to "improve" them in order for them to work properly, they are absolute trash, better just throw your money out of the window or give it to someone who really needs it

What type of XR is this? XR650?

Dont have to replace the washer?

Hey man, thanks for the video. One question, can it be used with passenger?

They don’t sound very good. I’m coming from a 2016 gsxr600 to sv1000 2005.

Realmente no hace falta quitar el tanque para cambiar la bujía. Solo quitar el plástico del costado y ya esta.

hey man love the bags! but im looking at the backside of my mt07 rear pegs, and see no bolt holes where you mounted new luggage bracket.... how did you go about mounting them ?? im confused

Anyone who is having a HARDTIME REMOVING the COIL PACK, I used a long nose hose plier (the ones with the clamp angled). Since the clamp is angled, it would roughly be horizontal with the coil while the handle of the plier will be angled upward and out. The clamp will clamp the "neck" of the coil pack, I placed another tool like a screwdriver to provide the fulcrum, and press down on the handle, raising the clamp upwards. That did the trick for leverage that my hand couldn't provide. It doesn't damage the coil pack either (just don't squeeze on the clamp hard).

Thanks very much, helped me lots

I rotated coil pack like a screw when i was installing them ,did i damage something just curious

Still watch this video every so often, it's amazing how much Menifee has changed. Can't even recognize Newport road in the video anymore.

Hey man can i put bar end mirrors on this?

Just did air filter/ spark plugs change, MT 07 2020 Ignition is ok, all working fine (seems like) but now “check engine light” is on 🫣 Have no idea what is wrong, all connectors plugged, coils on the place, spark plugs are original and new

Hola, tengo una transalp 600 con motor restaurado entero. Las marcas en el arbol de distribución esta. Como en tu video,no estan totalmente paralelas . ¿ Sabes por que sucede eso? Grcaias.

These guys have no idea how to ride a motorcycle

Do you need to drain the tank first? or can it be done full.

I could not remove the coils, they were so tight and no enough room for my hand to twist them...

Link to the rear line parts? Can seem to find what they Are called

Please correct it’s the T mark! Put it somewhere in the Title or whatever because i believed you and didn’t look in the manual and bent my exhaust valves

Great Video. Can you please link where you bought these from.

Did you have any problems with the camshaft eaten up the rocker arms cuz I have a hot cam in my bike and I set up the same way you got yours and stuff I even put extra oil on the cam and I also put some other stuff on there to keep it so it has lubrication with it starts up cuz there's no oil going up there yet all right let me know okay thank you

Thanks for the how to, bike is at 15k miles and needed new plugs since 12k. Full yoshi as well and you can tell it’s lean from the plugs being white/rusty. If you have an exhaust I would get a tune asap. Bought the bike at 12k and after seeing the plugs I’m getting a tune asap.

I have these bags on my mt 07 2021for about 1 year now and works great. But it hits the back signal light and one side is coming apart. Was wondering, if you have that problem. Thinking of changing to a tail tidy but not sure which one.

Aren’t you supposed to weld that decompression hole????

Man, I forgot what twisty roads look like. Don't ever move out of CA. ✌️

I wanna put clip-ons on mine, which ones are these? I can't find them using the search on their site

Great Video. Good explanation

Why is the open side of the bearing pointed to the sprocket and not the closed one? If it's the other way around the oil from the reservoir would soak it all the time, instead of only being sprayed oil through luck...

I came here to look at videos about the mto7 WTF is this? Lol

Great video thanks, does this change the overall riding position?

What website did the get the steel braided line and what’s da size on the stock ones ? I need a cable with like 4 more inches then the stock line

With my brother-in-law, we once had a screw inside the engine .. moments of horror because the calculation of the cost of buying the gaskets fired, only after a few minutes I came up with the idea that you can turn the engine upside down and shake the screw out, which we did with success.

Where did you get the oil cooler? I have a XR400 which I want to upgrade to 440cc and I would like to install a oil cooler!

i want to put steel braided line when i need to replace my rubber ones. Thanks!

do you think that is possible to elbow drag with that clip ons?

Where did you buy those spark plug bro?

Dude great vid. Oddly enough we have the same exact bike, same bars, same rear sets, same exhaust, same keychain but mine is orange. that’s dope I’m in love with the bike. Do you run mirrors?

Coolant corosion seepage. Stray voltage in coolant. Drain fill. Put positive lead in rad opening ground other lead. Half a volt in coolant is baaad.

Hi can you carry these bags fairly easy into your place of work from the bike? Im thinking of getting something like this but would need to carry the bags and the stuff inside into my work place.

Need descompresionador???

Sell me those stock bars, I got my bike used and I think mine are bent...

No antiseize. Ever... Torque to spec...

Apunto puento

🏍💨 Vroommmm… @4:32 that maniacal laugh 👊🏼

Nice ridin brotha!

Need descompresionador ????

Would of been much better to show yourself actually doing the job vs after the fact.