Відео

Hi! Basically, it is only necessary to do it on the side where the problem is.

@Starwing78 how did u managed to know which side had the issue?

@@vayler1 Carefully pull the tool (not the hook!) along the hinge, and where it gets stuck, that's where the problem will be. (Starts at about 1:00 in the video.)

@@ranielfriedHey! Great to hear that!

Unfortunately, yes, because that's what causes the problem.

Yes, this is the function of the brush, but unfortunately, when the factory adhesive breaks down, the brush gets tangled. That's why you have to remove it. But you are right, the hinge can be damaged, so do it at your own risk! Or try to have it repaired by the service center.

Hi! Yes, be careful! Look for Part2 -video, and read the description!

Ohh, sorry to hear that!

Yes, you have to be very careful, since this is not an official repair/cleaning method. Maybe I was just luck, but I did it with very little force. Thank you for drawing our attention to this, I'll include it in the description of the video!

You are welcome :)

I hope you find it useful :)

@Starwing78 thanks i really apreciatte😀

Pagla

@@sakhrnoman Hi! I can create a new one with the method. 🙂

Good news, I made the video about the process as you asked! 😀 Look Part 2. for the process!

Thank you sooo much ❤❤❤❤❤​@@Starwing78

@@gungdesadhaka Hi, okay, I'll make a short video about the method soon 🙂

@@Starwing78 please make it quickly

I made the video about the process as you asked 😀 Look Part 2 for the process!

No, because the hinge mechanism is between the inner display and the outer casing. So it prevents you from being able to reach the internal display with the blade. If you press the blade deep enough and move it, you can feel it touching the mechanism of the hinge. But I have to say that you should do it at your own risk and if you are not sure, then don't do this method. I cannot take responsibility if you damage your phone. Maybe before you start, watch a few videos of how someone else took the phone apart and then you can see how the hinge and the display are positioned in relation to each other.

Thnks fr the advice 😊

@@CRAZYUPDATES Hi! The brush is on the lower part of the hinge.

Thanks

@@aayushsthapit Wow, great to read this! Wich pry tool you used?

@Starwing78 It's a general plastic pry tool used for opening backcover of phones.

@@aayushsthapit Okay, thanks :)

@@HEXADECAMAIL Hi! Good to hear that, well done! I'm glad I could give you a good idea :)

Thanks for watching the video and advice. Anyway, the process is to carefully insert this tool into the hinge slot and pull it forward. You will then feel the resistance of the brush as the device engages. Then you have to carefully pull out the device. The process must then be repeated in the opposite direction. Ok, I'll try to update the video with the process, although I've already removed the stuck brushes.

Good news, I made the video about the process as you asked! 😀 Look Part 2. for the process!

@@Starwing78 thank you very much 👏👏

@@mehrezdronga The easiest way to do this is when the phone is completely closed. Notice the gap change as you open or close the phone.

@@Starwing78 Thanks for your response

@@69294 Hi! I think the positive and negative are the first and the fourth pin on the pogo pin connector. But first, check all of the pins if they connect correctly. After a few months, they can oxidate and will lost the connection. Firmly clean them, then check the connection of the charger pins and the watch pins.

​@@Starwing78hi which way would I be looking at it

Sorry I meant on the battery itself if you no where the positive and negative are

@69294 I don't think it's necessary to charge the battery directly. first try to clean the charger contacts and check that they are all touching each other. I say this because, unfortunately, I also had the case that one of the four contacts somehow slipped inside the charger and therefore did not make contact and did not charge the watch. Have you checked whether the charging voltage is present at the charger contact? If you find all connections OK, clean the contacts (I scratched the copper contacts with the tip of a pin) and leave the watch charging for at least one full night. for me it didn't charge for about three or four hours and then suddenly it started charging. I hope it works out for you!

@@KOCustomCreations The removal was "interesting" 😅😆

It's not as complicated as it seems 😅

Thanks! 😀

I just installed it😅

Hi! What's your question?

@@Starwing78 Hello thank you for answer , can you tell me if is possible to separate the screen from the body but still using it ?

@@Starwing78 cous i would like to put it into a old motorola v3 and use it like a smartphone👍

​@@gianfrancio1634 Hi! As you can see in the video, you can separate the screen(with the circuit). How you want to use it?

@@Starwing78 hello thanks for reply, do you remember the old motorola razr v3? id like to remove the old parts from the shell and put inside somethings new to use it like a smartphone that why i was thinking on a lem t the only issue thet the lem t has the antenna connector in the wirst band so it will be unconfortable to disassemble , i see the appllp max is similar the lem t but has the removable case and the antenna are inside the shell have you ever try it? i mean the appllp max whatcg

Hi! Search on the watch about "Assistant", then "Connect phone". You can find the code 😀

Hi! Try to disconnect and then reconnect the battery.

Hi! Try to disconnect the battery then reconnect. You have to unscrew the back cover.

You can find it on Aliexpress

Hi Roberta! I made a bootable pendrive with win10 on it. Made with LinuxLive USB Creator (LiLi).

Unfortunately, it is not included, it cannot be expanded. There are 16gb and 32gb versions of it.

right

Absolutely yes 😎

nope. Intel atom supports only 2 GB.

There is no 5 pin usb port on the motherboard. You may be able to make a DIY adapter, but this will require an external power supply which makes it a little uncomfortable to use.

Ciao, l'ho riscaldato molto delicatamente con un asciugacapelli mentre lo tiravo su. Questo rende più facile rilasciare la colla.

What's your experience after 1 year of use? If you still have it.

@@Starwing78 I had to do a lot of research There's an app that you could turn it into an app Literalist just like a tablet

Sure! Remove the back cover and put the watch in to a bottle of rice for 2 days. What is the current state of the watch?