Відео

The floater came off on mine and fell into the pit. Hope there was something better than this junk.

Why do you not have a water tray for your hot water tank???

Wow. I just bought a handle set. This is great information to know about the warranty.

a good video, but I just repaired one by extending the rod with a segment of (thick) pipe from a used ball point pen.

I have a 2013 legend 2 burner with original burners. after 11 years I decided it was time to change out burners. Much to my surprise only one seemed to be damaged but did the change out anyway. At the same time gave it a through cleaning and the Grill work jus like the day I purchased it. Bought the burners directly from Napoleon and the sear plats came with the burners. For 100$ I got a new Grill. Your video made it look very simple and I followed your instructions. Screws were a little rusted but worked fine. By the way Napoleon included new screws with the purchase. Awsome service very pleased. Canada.

Here’s an important tip - if you are removing an older Pella crank because it is broken please note that they are basically unrepairable and are very difficult to find. So first step is to find the proper replacement part including whether you are looking for a left side or right side (when facing the house). One can run $200+ - $300+! eBay has used parts for about $100 and up. Don’t tear your sash apart until you are ready to rep,ace.

You must have a nice wife to allow fix-ups in the entry way

This was the perfect video - solved our problem of using a drill because the handle wouldn’t sit flush. Thank you!

RIP Daniel

Four years later... did it last? That is the whole point after all. Fix something that don't last (and should be illegal as they are used for warranties and depending on storage conditions can last less) and keep it last more, but, how much is more?.

Recreational Fuel, all the way , with SEAFOAM. No issues, but The drain is even Better.

Great idea to use the left over metal you had. Replacement metal at Home Depot is expensive

These things drive me crazy ! Started this thing 3 weeks ago during a snowfall and no problem.. suddenly now it won’t even remotely get close to starting. First time of the season I understand but it should be easy from then on !!!! Ugh!!!

Had an Ariens that wouldn't start earlier this afternoon and followed your instructions. Everything worked EXACTLY as planned, and I now have a snow machine that's making passes better than Joe Montana in his prime 🤣 But seriously, thanks for the video. I knew something was up because I did some maintenance on it a few months ago and started it up before I stored it.

Welcome to 2024!! First small snowfall here in the Mid Atlantic in really almost two years and you guessed it, the snow blower would not start. Ran it a couple months back but not when I needed it. Followed the basic rules, checked for spark and also if the plug was wet with fuel which it was but still No fire, at all. Gave it a shot of carburetor cleaner then stuck the plug back in and she fired right up for a second or two. Drained the old fuel out and replace it with fresh fuel and she started within a second or two. Oh thank heaven!!! Thanks for the information!!!!!

Worked like a charm thanks

My goodness one pull and it started right away!!! 🎉you’re the man !! Thanks bud.

Think I have this EXACT blower 😂 it chugs high idle to low, gas is good, and just worked fine yesterday. Don’t get it. Advice? Thanks ahead ! 💪🏼

Can u spray carb cleaner in the whole too?

Merci from Quebec!

Ok novice here. I filled tank with gas a few days ago, tried to start didn't start. Put a new spark plug in, didn't start. Can I follow your instructions if there is a full tank of gas or will all the gas need to be drained first?

That can't be good. Now your pump is stirring up the sand in the bottom of your basin and going into your pump.

This fixed my Ariens Professional 21 snow blower. Thanks!

Bummer didn't work for me. Also put in new sparkplug and still doesn't run. Fuel primer feels like it's not working maybe it's not getting gas. Ariens 24" snow blower only 3-4 years old and have hardly used it with not much snow past few seasons.

Thank you it worked

Don't use premium gas. High test gas has the same and sometimes MORE ethanol than regular. It's the ethanol that gums up. The key is not to use high test - but rather a gas with detergent. Better yet, use gas with NO ethanol. You can buy it at the box stores in gallon and liter sizes. I use regular gas during the season, but on the last fuel up of the season before storing (whether it is my lawn mower or snow blowers) , I fill it with ethanol FREE gas and let it run for a while to get through the system. Then when it is stored - no matter for how long - there will be no gum up and clogging problems with the carb.

This worked like a charm!! Thanks for the succinct and helpful video!!

Thank you! Snow is on the forecast tomorrow, and this idiot left gas in there for a year. Did what you showed here and she started right up. Cheers!

this worked for my path pro👍👍👍

I've been trying to take those bolts for days and I still haven't made it...😢

hold your camera steady. can't watch it like that

chain connector links are cheap. Fix it right.

merci mille fois a million time Thank you

Premium fuel still has at least 10% ethanol. What premium has that helps small engine carburetors is more detergents to help clean fuel systems. Small 4 cycle engines are relatively low compression and don't need the slower burn of 91 octane that high compression engines need. Using Sea Foam with E10 fuel is a good idea. An even better idea is to use non ethanol fuel if available in your area. I use 89 octane non ethanol fuel along with Sea Foam and never have carburetor problems. Ethanol absorbs moisture and that is what causes carburetor issues.

Outstanding simple solution. Changed spark plug and started right up!!!

Finally someone who just shows what we need. I only wanted to know which screw and what to do.

500$ save because of you Thank you so Much

I ckeaned out the gas. When i hit the primer button but it sounds like an air leak. Fuel seems to never fill. Any ideas on that?

Did this and cleaned banjo bolt took 4 min runs like a dream

Nice video, straight to the point 👍👍

Good job, but I am not handyman also have no tools

Just made one for my second hand big wheel pusher, using a steel strip from Hardware store. It works great. I am waiting for storm.

Thanks lefty

I would rather use any other way than blackening the paper. Maybe ultraviolet light will work.

Great video! Thank you

Love this! Makes a statement too. Most people (my fellow Americans at least) send EVERYTHING to a landfill as soon as there's the least little thing wrong with it, without making an effort to make it last longer. Gotta stop doing that before the planet becomes one huge landfill.

ingenious!

Even simpler… Just use rubbing compound

Rivets work well too! 😊

Great Job! I needed this video. Thanks for taking the time out to make this. I learned a lot. Now, on to taking off my door and installing my bi fold barn door!