Відео

スネイルからの通信前に撃破しないといけないので難しいですがぜひトライして聴いてみてください。

そうですね。古い製品だと金型改修していても実際塗装したり拘ると色々いじる必要がありますのでね。でもそれもたのしかったり。

Thank you. It was a lot of work, but I'm glad we dug the trench and got a good finish.

It may vary slightly from colour to colour, but it is not brittle.

Hello. I am not a weatherization person either. This time, when I inked and wiped off the overflow, I didn't take all of it off to express rain dripping and so on.

I forgot the formula so I looked up my own blog. It was 2:1 Mr. Color metallic blue and black.

Hello. Not only this kit, but also the Armoured Core series has many small parts and a large number of parts, making surface treatment difficult, but if you put your hands in, I think you will be satisfied with the finished product, even if you only assemble it. The kit has been re-released, so please take this opportunity to give it a try.

Unfortunately, I never saw it. The giant booster is romantic.

@@GARAGEREB then why'd you mentioned advance of zeta then? when RE-Zeon was introduced machines like the barzams and anything from the titans started to look like armored core starting with the byarlant

@@nomelitoarquillano7454 My earlier impressions are based on the images I googled.

It was quite a while ago.Yes, it was.Yes, it was. Flattening out the surface was difficult. Also, there were many places where framing was not possible, so I had to paint while assembling. For the eye camera, I made a punch to remove the mirror tape. The material is good, so it is a kit that makes you want to make a lot of things. But you need motivation to build it.

@@GARAGEREB Thank you for your answer. I'm usually not that bad to build a model kit, I build many Gundams, Digimon Model Kits etc. And Armored Core is my favourite, and I recently found out that Kotobukiya made a reproduction of this model, but the "difficulty" to build this model can be unnerving, but still, if you say it is worth it, I will try this model :P^^

@@Zekutso I understand that the V.O.B. sets will be re-released as well. I heard that it is not movie color, so it might be a little easier surface treatment. It's a lot of work because of the volume, but I think you will feel great satisfaction and fulfillment when it's done.

Sorry. We do not distribute Space Battleship Yamato paper crafts due to copyright issues.

立体化早く？立体化やめて？まああの大きさなので難しいですかね。

That's a spelling error. Thanks for pointing that out. I had not noticed.

Glad to be of service.

Looking forward to the sequel.

It's quite a challenge with the airframe, generator, and armament. I can still narrow it down if I can determine the characteristics of the asen, but it is a bind and you will have to stay tuned for the future.

You have been looking at it from all over here. Were you caught off guard?

ありがとうございます。

確かにギリギリではありますがそんなに浮いているわけでなないので前半のAB管理も後半のフルチャージも出来ているのかなと思います。

ありがとうございます。照準合わせと攻撃のタイミングが難しいですので当たると嬉しいですね。

胴体のスリムさとそこにつく翼のシンプルさと可動翼のギミックに惚れてしまいますね。ラストガンファイターという渾名もいいです。

I temporarily assemble the items to be painted once. Then, I determine which parts need to be glued before painting and which parts need to be reassembled afterwards. I do not force parts that may break when disassembled after assembly, but temporarily fix them with tape or process them to make them easier to disassemble, so I do a temporary assembly to check for such defects in advance. After surface treatment and other processing, we proceed to painting. Ball joints on robots are subjected to a certain amount of load, so it is best not to force them on and off. Translated with www.DeepL.com/Translator (free version)

四段ある三段空母、艦載機の置き場の謎などありますが、ロマンの塊ですね。ドメル空母艦隊の構成からしても短期決戦型空母といった所でしょうか。

El kit está en gran parte codificado por colores. No se pinta todo el kit, pero los detalles no codificados por colores se enmascaran y se colorean.

Thank you for your comment!

I think my joints were about as weak as my knees.I don't pose much.I don't pose much, so I try not to mess with them as much as possible.

@@GARAGEREB thanks for the quick reply!! This is very helpful, I have much respect for your dedication!!

Ambient is partially painted and washed as well as inked. Here it will be re-released again and sold in several varieties this year.

I am not a fan of iguas and stealth ghosts myself. I wish I had a good strategy.

カーラ・チャティ戦はハードですね。ラスティはスライサーに毎回やられています。

@@GARAGEREB うち毎回ラスティ倒す時、ラスティ自分でキャノン受けるために飛んでくるみたいなことなので、逆に同じく補給なしでスネイルとイグアス戦は弾切れで時間長伸ばしてしまった

@@怪獣十兵衛 あそこ補給なくて困りますね。どうしても強武装装甲アセンで押し切る形になってしまいます

@@GARAGEREB Sランク挑戦の時にめちゃ困るｗ

The interior was painted in metallic black and dry brushed in silver and gold. The exterior was washed during inking and stained with Tamiya's Weathering Master for the finish.

I'm sorry.I don't understand Zero Generation 3.

Thank you. I masked off the inside of the yellow part from about 1mm inside the glass, and after applying a thin layer of yellow paint after the black, I peeled it off and applied a commercial canopy masking sheet and painted it in the fuselage color.

It is unique in FA because it is composed of straight and flat lines. In production, the knee joint was loose and needed reinforcement.

@@GARAGEREB ths for info

Thank you for liking it.

do you mean that building Kotobukiya's kits is more pleasant than Bandai's? as in easier to build? i'm planning to buy this, so knowing what my building experience beforehand is much appreciated, considering it costs twice as much compared to MG

​@@hellfire2023I built white glint, and I can tell you they're like a strange blend of a high grade and master grade in terms of engineering, a slightly better version of the reborn 1/100 line sometimes. Though there will be some tolerance issues with fitting certain parts so you better have some glue or extra thin cement handy.

@@soundywaivy i've watched 1 review of that kit from mecha gaikotsu. is it easy to fall apart and super brittle? in that review, apparently the kit was so loose, it was glued to the point of not being able to transform to flight mode. Overall, was the white glint that bad? thanks

@@hellfire2023 I got the regular version, the movie color version is the brittle one. Good thing is that the VOB version that's getting re-released is using the regular version plastic.

@@soundywaivy i've just watched another review for ALICIA UNSUNG, the same line as this one and white glint. Does your white glint disassemble itself at the lightest touch? Also by glue, you mean non-moving parts right?

El cuerpo principal está dividido en cabeza, pecho, brazos y piernas, y puede reconfigurarse con otros aviones, pero las conexiones son bastante frágiles, por lo que es mejor dejarlas como están.