Відео

Feels great on hot days. Thanks for watching!

Follow the directions on the can as it’s been a long time since I’ve used it. I believe you need to drain the gas but always run your equipment with the manufactures specified oil so you don’t burn up your motor. Thanks for watching!

It’s been very reliable since day one any have been using for ten years with no problems. The only downside is the older units don’t have the cfm’s and power like the newer blowers. For small jobs and everyday grass clippings this will work fine. Thanks for watching!

Me to were in the same boat I'm getting a pb 500t today at the pawn shop I'll let you know how it is

@H34DHuncho Hopefully it’ll treat you as good as it has me. Thanks for watching!

@steadfastlawncare hey I just got it and tried it for an hour I like it so far it's really loud tho I ran it without ear protection

@H34DHuncho Glad you like it and save your ears. Thanks for watching!

It runs very smooth. I did very the throttle for the first couple tanks of fuel to break it in so it wasn’t just running at one constant rpm and I always let it warm up for a few minutes before I use it and go full throttle. Thanks for watching and enjoy!

Yes for 99% of everyday blowing grass and leaves off driveways and dry leaves in the grass. If you have leaf jobs I would definitely get the 9010 but it is very heavy but will save a lot of time.

Thanks for watching!

@@steadfastlawncare thanks for posting

@@steadfastlawncare I was thinking about getting one to do leaves with here in Ohio. I figured it would be a good start to the business

@bb-mh3xb You’re welcome! I’ll try and get more videos once the leaves start falling.

That’s right! 💪💪💪

Thanks for watching. Looking forward to seeing your content and always follow the manufactures directions.

@@steadfastlawncare Can't really follow the directions included with the Speed-Feed 400 since they are wrong.

I use what the manufacture recommends. Just read the instructions on the bag and there will be a chart for your square footage based on the spreader. Thanks for watching!

Thanks for watching!

That means they were repaired from the recall and stop sale Honda had. Thanks for watching!

Thanks for watching. I can’t wait to see your original content!

On battery powered stuff if I battery goes it can total the equipment since the replacement cost is insane for the prices of batteries. Thanks for watching!

I just got mine back from the repair so I’m assuming they are working on getting all the fixed ones out to the dealers.

Definitely, thanks for watching!

@@steadfastlawncare thanks for making a video with this so fast! I appreciate it

@bb-mh3xb You’re welcome. I haven’t seen any other videos out there yet.

@@steadfastlawncare no I think you have the only ones.

I love this blower I did a exhuast mod it screams

Hope you’re enjoying yours as I have mine. Thanks for watching as there isn’t much out there on this blower.

@@steadfastlawncare yeah fr

There was a stop sale right after they came out. I was able to nab one the day they were first released. I just got mine back from the recall fix so hopefully once they get all the fuel lines fixed you’ll see them hit your local dealers. For me the lightweight is totally worth the wait. Thanks for watching!

More will be coming. I’m glad to have it back. Thanks for watching!

That’s not good. I just got mine back from the recall. I do run my equipment at 42:1 since they run at such a high rpm. Thanks for watching!

The blades lock in on the spindle so they are perfectly trimmed. There are two notches on the spindle and two holes on the blades where they sit and won’t move. Check out the owners manual as it shows exactly how to change the blades. Thanks for watching.

@@steadfastlawncare thank you!

@jordandorn5405 You’re welcome. Hopefully a spindle didn’t get busted if they weren’t lined up properly.

I love that echoes 3020t you don't like it

I never had any problems with my Echo equipment. Dealer support is key. I do run them at 42:1 so everything is nice and lubricated when running at high rpm’s all day. Thanks for watching!

It shines during fall with the leaves. Thanks for watching!

I mix my oil at 42:1 to keep everything extra lubricated since they run at a high rpm for many hours. It is heavy so I use my 5810 for everyday use as that’s 20.9 pounds and packs 700 cfm which is amazing. Thanks for watching!

It’s a great motor just too heavy for all day everyday use for me. Thanks for watching!

That’s not cool and I don’t like when people leave their clippings in the road either. That’s why I blow everything back into the yard. Gotta keep the streets and driveways clean and legal. Thanks for watching!

Wahhh wahhh😢

Thanks you. It works hard getting the job done.

Yes, once I get it back from the shop. Thanks for watching!

@@steadfastlawncare thanks man I looked up the specs on this blower and I'm very interested. I want to see how it compares to a Stihl br600

@bb-mh3xb I got this as it is light weight and powerful for everyday use and my 9010 for the spring and fall heavy duty jobs. Best equipment at the end of the day is dealer support. Thanks for watching and I’ll get more videos soon once the recall fix is done.

@@steadfastlawncare ahh I thought the recall was already fixed. But I understand having an everyday and a heavy duty blower. I'm a Stihl guy at heart but I could get the shindaiwa version and pretend it's not an echo lol

@bb-mh3xb The dealer is just waiting on the part from Echo but yes I did make a video about what the stop sale/recall was.

You’re welcome. Best shoe on the market from a great family owned business. Plus the red matches my Ferris. Now we just need a University of Michigan Jax for game days.

@@steadfastlawncare We appreciate that! Glad to hear the red matches the Ferris. 🙌 And we will see what we can potentially do in the future with other colors!

The edge should have been up. Not sure why I did that as that was a long time ago. Good catch. Yes, weighed out to finish the backyard of the property as well. Thanks for watching.

Same as Echo except a different throttle trigger. Echo bought them out years ago so same company. Thanks for watching!

Same blower and same brand since Echo bought them out. If you want a Japanese brand Maruyama is the way to go. Thanks for watching!

Was yours brand new or have you had it for a while? My replacement has been perfect so curious if there was a bad batch from the factory. Thanks for watching!

@@steadfastlawncare mine was leaking brand new but I thought it was just wanted spilled from when I was filling it up. Used it a few times and always felt my back getting wet until I decided to check the web. I just dropped it off at ace hardware where I purchased it from. Used it maybe 8 times to date. Got it in march.

@donpowell4025 Hopefully they take care of you. My local dealer just exchanged mine with another unit they had in stock.

You can find good deals on them but it’s all about productivity. This pays for itself in no time as I’m able to cut my mow time by 40% which means I can add 40% more clients and cut more properties. I can cut 10 lawns in the time I am able to 6 with a 21in walk behind so this was an easy choice on top of the insane build quality. Thanks for watching!

I converted the Maruyama B300L to a bike handle brush cutter. I made a video on that. If you want brush cutting you definitely want to have bike handles for control and ease of use for several hours at a time. Thanks for watching.

Yes, there is an updated video. Issues/recall due to fuel line.

How did that happen?

@steadfastlawncare it was 5 years old and overheated. It broke a head bolt, scored the cylinder, and locked up. I did a video on it myself.

@BigSouthOutdoorsTV I’m sorry to hear that. That’s not even broken in at five years. I do mix my two cycle at 42:1 as the 50:1 is so little oil and the equipment runs at such a crazy high rpm.

Yes, for it being super light weight yet powerful. If you bought one now they should be all fixed with no issues now that it is post recall. Thanks for watching!

Mine has been good. There was a stop sale as Honda had major issues with this model so make sure you get one that wasn’t affected by the stop sale and all the problems Honda had since the redesign. My go to walk behind is a Ferris FW15 as it saves so much time.

Thanks for watching!

@@steadfastlawncare I’d love to have a Ferris. Can’t go wrong with 400cc and a 32 inch deck.

@turtletitan62 Lookup your local dealer or find a good used one on marketplace.

Yes, me too. The new models got rid of the maintenance port to grease the head which is not good.

Thank you!

@@steadfastlawncare You're welcome! Hope it's a good giveaway for you!

@STABILBrand Me too!

It’s very smooth. Just too heavy for my all day use. Thanks for watching!

@@steadfastlawncare it definitely is the quality is by far the best I’ve worked with and it lasts a lifetime

I’ve never had an issue with any small engine so I have to say quality is top notch on all of the big name brands. Maruyama is made in Japan and has a five year commercial warranty so that may have a slight edge over the others.

During normal use yes I warm everything up for a couple minutes before using. If I let everything warm up in a short video most wouldn’t watch until the end. Thanks for watching!

@@FlamesHimself There will be more giveaways. Thanks for watching!