Відео

i hear ya. i refuse to buy another one, or they fix the problems with this truck. i just keep rebuilding mine I love sending it over a hundo feet. that's just me. have fun bro.

@@readeracingRC Yeah, I don't get how they still sell so many after not fixing that in even their upgraded one, which is $400$ more, lol. if ppl would stop buying so many I think they'd be forced to fix it,, I wanted it to drive through snow since it'll be a Xmas gift, but that'd be hard on it, so it would probably just break over and over again. Or I would just buy a used one and upgrade it, but even the upgraded ones seem to break a lot.

you know i did move it a couple time trying to make it stick out farther. but may have made it worse. Big B just ties his in a knot about the box. im going to watch that a little closer. thanks for the tip. Have Fun.

I hear ya. I only got a few good launches on it. i had to deal with the Karen that showed up.

well hello from from across the big pond. and i found a perty choice pond to run the boats in. im new to the boats, and jonesing for a bash with a XMaxx or OUtcast 8S. thanks for watching, More to come.. lol Have Fun

Amazon: i.ytimg.com/vi/8eOYrblXnEI/hqdefault.jpg?sqp=-oaymwEcCOADEI4CSFXyq4qpAw4IARUAAIhCGAFwAcABBg==&rs=AOn4CLCalCqc2gjsDvTgBH6csw7bOloEMw

kewl beans. i had mine out 4 times? its a jumper? i cant wait to do that. i just bought the horizon Tug Boat with retriever's arms. im going to take it out and play with it and practice if i have to retrieved a boat. this sonic just hauls ass. i watch "Iornclad".. Big B, hes got the set ups for this rig.

she will be coming out soon. i think it's the perfect retriever boat. just got done doing the soldering.

no that's bad. if your talking about the pinion gear. no you need to remove the gear and grub screw. clean the grub screw and the pinion gear threads with alcohol. to where there is no more dirt (oil) from the factory. has to be clean. then apply blue or orange lock tight. red is really hard to get off. (permanent) and let dry for 24 hours.

@@readeracingRC It's the spur gear that moves on the shaft. looks like the pin that holds it in place is where it's loose at.

my bad. i thought it was the pinion gear.. so your saying the spur gear. ya that should not be moving around. i would pull it apart and check maybe you missing one pieces. im looking at the exploded view. it has to missing a pin or a keeper. i would tear it apart and see what is missing. please keep me informed. this bothering me lol have fun.

@@readeracingRC cool. I found it missing a washer behind the cush drive.

thanks for watchin. sometimes i think i do to many slomo's. its a fun bashing area. soon there is more. thanks again and have a terrific day... have fun.

hells ya brou. there all fixed again, and after my surgery ill be out in full force. bash on my friend.

THANKS BROU. love this park. I'm the only rc user there. i hope they don't get boring, but i really like the park. just need to make the sends even bigger. thanks for the chat. have Fun.

my apologies for the lousy explanation in the video. i mean to do it over. But the whole idea is the shafts were made first on the rtr's. the exb came out and put the red ring on the end of the arm to make it stronger. i see not needed. but there about 1.5 mm thickness. so adding the ring's made the shafts to short. by removing them it puts it back to stock. but it's still to short in the first place. i have ground off the plastics on the end of the arm to make it shorter. and the ball will not pop out when landing off big jumps or the swing arm bottoms out and it just walks it self out. a found the more worn out your bearing, cups, diffs. get it makes the isus come back. so keeping it fresh will keep it from doing it. also putting in the rubber insert you put in the cup helps to.

oh wait i read yours again. you mean the balls at the end of the arm. the steering blocks? oh oh. you mean the plastic is worn out. its messed up the first time it pops out. nothing really you can do, but get some aluminum ones. hot racing vivitvon etc. the plastics stretch out and it's a bad design for plastic parts. should be aluminum from the factory.

Thanks brother RC Enthusiast. Its a awesome place troo bash. Have Fun

thank you for the comment. and be grateful for what we got. and that i can share this with everyone. and most of all.... Have Fun.

as I. i raced M<X for 40 years and cant ride anymore. and this hobby is right up the alley. so much fun.. accept. you go out to bash and it breakers in the first 5 minute's.. lmao. but mot often. yes love the hobby. have fun.

and yes the XMaxx wins lol

yup.. absolutely. but if you can land it on all 4 wheels without the power on, there not quite as breakables' . i would not suggest it if a person could not land it right every time. i have an advantage to. im an ex-motocross racer, it give you quite the advantage. the secret? its all about the launch.

@@readeracingRC I just don't believe in jumping my cars and I've been doing rc cars for 20years and I still have my old cars they are still in good condition it's hard to get parts nowadays 😎👍

Thanks brou for the comment. the beeping sound is the DX5C transmitter. I have the timer turned on. It's in the stopwatch mode. It's set for when the throttle is applied over .5% it starts the timer. I use the system for how long a battery pack last. much more precise then looking at a clock and not knowing how much time i have really used. I find good battery last about 13-15 minutes. bad last 4-5 minutes. like i said its true timing used. I think that makes sense. im a driver not a writer. LOL. Have Fun

@@readeracingRC oh, ok yea that makes sense. I didn’t know about that function and I thought surely there is no way you were fiddling with it while driving 😆 I’m starting to put more cars on my Rugged. Tired of dragging multiple radios plus I got 2 of them mixed up and spent forever trying to figure out what was up 🤦🏼‍♂️

actually. i been wanting to use the DX5C\Rugged. There is a function that you do fiddle with while driving. Setting the "E" button and use it for sensitivity. So flying up to the ramp, Push the button and the sensitivity will only turn the wheels small adjustment, so you can keeps the Wheels in a straight line. and after the jump let the button back to normal and you can bash with all the steering. now .... does that make sense ...LOL The whole idea is keep the wheels more straight and approaching the ramp and keep from doing the inevitable Ramp Shaver. i don't like to Shave either way. LOL Have Fun ps i know what you mean by grabbing the wrong remote... frustrating .

That's cool. and funny. even if were on the other side of the globe. bash on brou. have fun

thanks. im finding out the more worn out parts make the issues come bake. Bearings, diff housing, drive shafts, outside hub,,etc.etc. when they all because problem it's time for a rebuild any way. have Fun

wow. i watched it again, and didnt realize how much colorful metaphors i used. lol.. and i was laughing my ass off too. have fun

I got ya Back on the sub. thanks

yes it does. thanks for the comment. means a lot to me.. have fun.

thanks brou. nothing better than getting the bug worked out on the practice track, ready for the BMX track. have a wonderful 4th. have Fun

Pimping. lol. Ya that WAS... a good spot to go. i learned my way around the rc's at this park. trucks and drones. But I ran across a couple cry babies about the truck on there precious dirt. and i moved back to my old stomping grounds. turns out the old BMX track is even better. i'm the only one that know about this new spot. so far no cry babies. lol Have fun

yes it does. but it cost me about as much as a 6S Kraton or Outcast EXB. and some crafty workmanship. I think i have an original. prob only one out there. thanks for the comment, always welcome... lol have Fun

i put the commment in the wrong place, now i see what i did. lol this what i meant. I got them from Amazon. The next set I'll buy will be stiffer strings. Now, mind you I put them on because I launch over 100'. And trying to have less body slap and catch the weight of the car from bottoming out. I thought it was going to be have shitty handling driving it. But as I write this I would almost say it helps the handling. I'm going to pay more attention if what I said was right. Thanks for the question and. Comments. The spring on Amazon was: uxcell Compression Spring - 1.2mm Wire Dia , 18mm OD , 50mm Free Length Spring Steel Extension Spring,Black,20Pcs I'm not sure if it is still the right move. But I haven't had a reason to remove them... Have fun.

@@readeracingRC gotcha. Thanks. I thought you were referring to an internal spring like are in the shocks on the Redcat Ascent.

WHY YES IT IS. I BEEN WONDERING WHEN SOMEONE WAS GOING TO SAY THAT. I JUST FOUND OUT IM THE ONLY RC DRIVER THAT GOES THERE. AND THEY JUST LEVELED OUT AND MADE MORE JUMPS. MADE THEM WIDER. ..I'LL TELL YA I HIT A GOLD MIND TO FIND THIS PLACE TO BASH HERE. HAVE FUN. ps. dammit i didnt realize the cap button was on. lol. not yelling lmao.. have fun

i notice the last set of RPM arms i bought they changed there mold and put a section to put droop screws on. yaaa.. i haven't had the issues yet but i was going to buy or make limiting straps. i been wanting to start putting them on my rigs . i think its a better way of limiting the swing arm from going to far and break more parts. thanks for the comment alway want to be helpful in this hobby. good luck but most importantly... have fun.

@@readeracingRC I just use the shock spring tension to allow droop usually

thanks for the comment. i have done 5-6 just on the e6000 and concrete tape. and half a dozen trying different scenarios and seen very little delamination. I thought the same thing. but the system i have done its works perty tight. a little on the contact points but that is whittled and cut away if it does. i think most of mine are over a year old and still look great. thank. and have a terrific day.

thanks for watchin. i did the chassis about a year ago. and that rig has taken a beating. i break arms more than anything. it like it has to have a weakness. and there is. but the chassis is like unbendable. kinda thinking like a leaf spring on a car. thanks have Fun

i appreciate your checking out the channel. it sucks not being able to get parts. i would assume you looked at my vid about the driveshafts' popping out. the drive shafts are to short. removing the red ring and washers help it from popping out. i went to the extremes and ground off about a 1.5 mm off the ends where the red ring was. i have a video explaining this.; I been turning wrenches all my life, even got to turn wrenches with a couple professional mechanic from back in my motocross days.... The videos... well... not so much. i been doing this hobby for 4-5 years, but making a video is like virgin territory for me. Im hoping they will get better as time goes by. I hope you get parts service gets better with time for you. Have Fun ps. yes hex screws. lol

i found that the more the bearing and parts wears, out it makes the problem come back . (only on 60 foot +) launches it popped out. i went to the extreme and ground off another 1.0-1.5mm of the end of the arm.. where the red ring was. glad it helped you out. Have Fun

Those driveshafts don't get anywhere near bottoming out in the cups. I'm not sure why they don't make longer driveshafts! Thanks again for the tips!

oh really. it is the original heatsink wedge and pried and taped onto get it under the top rail bar? i thought i was original. lol you have the 1100kv hobbywing?

@@readeracingRC Indeed I do, I pried it open a bit so it covers the motor. I also shaved the sides down a bit so I could get it over the top rail bar, then used two zip ties to the motor. I also have the stock fan housing, I replaced the stock fans with Rocket Fans, they fit in perfectly.

Hells Ya. true musicians... the music blow my video's out of the mud. the best one is Red Barchetta. and only fits jumping the cars. if your a true Rush Fan you would know that the barchetta is a flying car he takes out for illegal sunday ride into the countryside with the internal combustion engine which are outlawed a hundred years from now. only Neil could write something like this. Have Fun

@@readeracingRC there are so many best ones! But yes that one is really good!

i paced it out with long strides. 75'- real close to 100'. my biggest flight is 115'. thanks for the comment. have fun

Thank you for the kind words about the jumps. been practicing quite a bit. It all started with the mini Maxx. Racing motocross has gave me an advantage of throttle control, especially launching them on and off the ramp. I like the backflip, I also like the stock ones too. But the way i see it, you have to buy them in pairs. I line most of my trucks with BackFlips, just because the the finance reason. There is always a spares. and not having an odd amount of different W/T laying around. good luck but most importantly... Have Fun