Bhai ye jo nai vitpilian 250 hai uska tail hata k with indicator purana wali me jaesa sirf indicator ata tha vesa kr sakte hai kya.....aor same jo pahle wala tyre hugger with numberplate atah tha wesa laga sakte hai kya
Stock one got damaged. So when I got the replacement from ktm service center it was white in colour. Even they had no clue on how it was white instead of yellow. I thought it looked cool and replaced both sides.
Yes it does get on my back. I have used this fender for 2 months and then replaced it with the stock wheel hugger. The stock wheel hugger does a better job at it.
You get it in RE service center just show them the pic or in a parked RE classic front indicator. They will understand. I don't think you will get this online.
Radiator guards don't make sense to me, They don't offer complete cover as there are gaps for air flow so there is a chance of radiator getting damaged even with the guard. They cost 1500 I think it's very close to what a brand new radiator would cost. I would rather buy a brand new radiator instead. And my biggest problem, you still have to clean the whole thing as it keeps accumulating dirt. And if you think the mud flap looks horrible, It cost me just 95rs. It's keeping my radiator super clean, no mud water has spashed on my radiator after installing it. It has kept the radiator safe from debris flying off from the front wheel. In this case I would take horrible looks over radiator guard any day. Spend your money wisely!
@@greyandwhite9730 if you would take horrible looks over spending money, I think then you should also buy cheap bikes over husqvarna, if you want to add 95 rs cheap things on your bike. If you want to own a bmw you can’t have a maruti mentality.
@@ankitchahar7091 if the radiator guard is not providing me with what I need on my bike, why should I use it. If a mud flap is providing me with what I want then I am going to use it. Is this that difficult for you to understand??
You have to set the gap between the number plate and mudguard about 5 inches nothing will happen. I have ridden the bike for almost 3k kms. It has never touched the mudguard.
It's an issue if you ride with pillion. The bottom will touch on steep speed breaker. On normal speed breaker it's not an issue. Solo ride its never an issue.
I haven't seen anyone use it on the husky but people have done it on the 390. So it's possible even in the husky, you might need the spacers and bar end weights of the 390 duke.
There isn't much info on the new model except the change in design. If you are in a hurry then get the 2022 model. If not it would be wise to wait for the new model. The current model has 149mm ground clearance which is less for our Indian road situation. If they could increase the ground clearance then it would be good. Also I feel they might bump up the power as even other manufacturers have bumped up power, ktm has stayed the same for a long time now.
It's OK for me my height is 5'9. I can get both my feet flat on the ground. I never had any issue in heavy traffic. But if you are short you might want to test ride the bike a little more to find out if it suits you.
If you mount the tail tidy as it's supposed to fit then yes it will hit the wheel because the gap between the wheel and the number plate has to be more than 5 inches. If you fix it like how I have fixed then no it will not hit the wheel hugger. I am using it with ktm wheel hugger at present.
@@greyandwhite9730 Did you try the ns 200 number plate holder. I think it is more longer which will not hit the hugger. Even with the hugger I am getting dirt on my shoulder and Helmet. So planning to keep both hugger and the plate holder
@@shameempk007 I did think of using the number plate holder of the ns. But the mounting points for this holder don't match on the husky. You have to drill holes on the underside of the panels to fit it. I didn't want to do it so I didn't try.
MotoPro Compact Tail Tidy/Fender Eliminator for Husqvarna Svartpilen & Vitpilen 250 amzn.eu/d/8aRixdm This is not a direct fit. Check my other video to get some idea about the extension.
@@greyandwhite9730 thank You so much for ur replt...I am planning to buy this bike...can u please provide ur fb , insta or whatsapp where i can contact u for queries in future
kya aah ahh krrha hai 😂
english bhsd😂😂😂
Bhai ye jo nai vitpilian 250 hai uska tail hata k with indicator purana wali me jaesa sirf indicator ata tha vesa kr sakte hai kya.....aor same jo pahle wala tyre hugger with numberplate atah tha wesa laga sakte hai kya
@@anuragwalke615 naya husqvarna ka modification ka idea nahi hai. Magar naya duke 250 me purana duke ka wheel hugger lagaya hai logone.
Good video, well explained.
can u send that royal enfield brakets link or make a small video on it
Bro please share you insta id
Sensible mods😊
It's looking sexy yrr ! I have to do it as well ! ❤
Now it’s looks perfect 🤘🏻🤘🏻🔥🔥
Where u buy this tail number plate
Can u please sent the link of mod of no. 3 tail teddy and Royal infield product
Can you share your Instagram
Hello bro can you send me the link from where you bought that bracket for tail tidy
www.amazon.in/dp/B0982DNY3S/ref=cm_sw_r_apa_i_FCKE3H9KH3GAGY4S520R_1?_encoding=UTF8&psc=1
Bekar hai pulsar leta vo best hai
Hello if you its tyre hugger... Or wnt to sell...i will buy
How is your radiator side colour is white rather than the neon green? Is it custom?
Stock one got damaged. So when I got the replacement from ktm service center it was white in colour. Even they had no clue on how it was white instead of yellow. I thought it looked cool and replaced both sides.
Hindi me hi bat kr le bhai
Superb bro I was looking for the exact stuff and I can see you invest a lot of time and efforts here and we are the bike lovers...... Thankyou so much
Thanks for the info. But please try to be more succinct
Bro what you did with the wire that use to connect the light above the number plate
I removed it from the chain cover and brought it under the seat.
How's the dirt with that rear fender? does it get over your back?
Yes it does get on my back. I have used this fender for 2 months and then replaced it with the stock wheel hugger. The stock wheel hugger does a better job at it.
Can you share the link for that indicator bracket?
You get it in RE service center just show them the pic or in a parked RE classic front indicator. They will understand. I don't think you will get this online.
@@greyandwhite9730 thank you!
To keep the radiator safe do you know there is something called Radiator guard instead of mounting this mud guard extension that looks horrible
Radiator guards don't make sense to me, They don't offer complete cover as there are gaps for air flow so there is a chance of radiator getting damaged even with the guard. They cost 1500 I think it's very close to what a brand new radiator would cost. I would rather buy a brand new radiator instead. And my biggest problem, you still have to clean the whole thing as it keeps accumulating dirt. And if you think the mud flap looks horrible, It cost me just 95rs. It's keeping my radiator super clean, no mud water has spashed on my radiator after installing it. It has kept the radiator safe from debris flying off from the front wheel. In this case I would take horrible looks over radiator guard any day. Spend your money wisely!
@@greyandwhite9730 if you would take horrible looks over spending money, I think then you should also buy cheap bikes over husqvarna, if you want to add 95 rs cheap things on your bike. If you want to own a bmw you can’t have a maruti mentality.
@@ankitchahar7091 if the radiator guard is not providing me with what I need on my bike, why should I use it. If a mud flap is providing me with what I want then I am going to use it. Is this that difficult for you to understand??
Any sort of vibrations on the tail tidy?
Yes It vibrates since it's not mounted directly on the chassis.
Dont shift number plate to down side, it will scrach of your front mud guard. I experienced the same issue previously when i was changed it to down.
You have to set the gap between the number plate and mudguard about 5 inches nothing will happen. I have ridden the bike for almost 3k kms. It has never touched the mudguard.
Nice vlog bro.. What about ground clearance issue on this bike
It's an issue if you ride with pillion. The bottom will touch on steep speed breaker. On normal speed breaker it's not an issue. Solo ride its never an issue.
Can we install knuckle guards as well as bar end mirrors on this ? Spacers required for installing knuckle guards ???
I haven't seen anyone use it on the husky but people have done it on the 390. So it's possible even in the husky, you might need the spacers and bar end weights of the 390 duke.
You better use ur mother tongue
😂
Can u make a video of tail tidy installation plzz
Hi can you share the link for tale tydi
Are you Tamil?
No
,first time i ride yesterday in greece very uncoftoble bike for my high 1.87 i am gonna choose bajaj bominar 250
Bro should I wait for svartpilen updated model ;?
There isn't much info on the new model except the change in design. If you are in a hurry then get the 2022 model. If not it would be wise to wait for the new model. The current model has 149mm ground clearance which is less for our Indian road situation. If they could increase the ground clearance then it would be good. Also I feel they might bump up the power as even other manufacturers have bumped up power, ktm has stayed the same for a long time now.
tail tidy ka link de do bro,tumhare bache ki sarkari naukri lag jaye asa ashirbad dunga.
bhai aapne ye tail number plate stand kahan se lia plz share share link
Thanks for the honest feedback!
such a detailed and technical explanation... Your bike looks amazing with the mods.. Thanks for sharing and ride safe Buddy!
Why don't you tried classic 350 mirrors or dominar mirrors, maybe that fits your requirements 🤔 this doesn't looks good on this high class bike.
Round mirrors have large blind spot. It becomes an issue on the highway. These wide mirrors offer much better visibility.
bro how did you mount the front number plate under the headlight?
I used Royal enfield classic 350 front indicator brackets, you can buy this from RE service center, to mount the number plate.
@@greyandwhite9730 thankyouu so much bro!🙏
Lolipop mirrior😂🤣
amazing video! really loved it!
Best tail tidy in svartpilen ever…
Thanks👍🏽
Hi dude, Can you please make a comment on seat hight it's comfortable or not while driving in heavy traffic?
It's OK for me my height is 5'9. I can get both my feet flat on the ground. I never had any issue in heavy traffic. But if you are short you might want to test ride the bike a little more to find out if it suits you.
Got it .. thanks!
Such a great looking bike
Wow great video brother 🙌 you’ve convinced me to buy one ☝️
Does the tail tidy hits the wheel hugger if I keeps hugger?
If you mount the tail tidy as it's supposed to fit then yes it will hit the wheel because the gap between the wheel and the number plate has to be more than 5 inches. If you fix it like how I have fixed then no it will not hit the wheel hugger. I am using it with ktm wheel hugger at present.
@@greyandwhite9730 Did you try the ns 200 number plate holder. I think it is more longer which will not hit the hugger. Even with the hugger I am getting dirt on my shoulder and Helmet. So planning to keep both hugger and the plate holder
@@shameempk007 I did think of using the number plate holder of the ns. But the mounting points for this holder don't match on the husky. You have to drill holes on the underside of the panels to fit it. I didn't want to do it so I didn't try.
Top speed and mileage you got from this beast ? Also tell me the top cruising speed where the bike feels comfortable on handlebars and all.
Can u please provide me details on the custom rear fenders and where to buy them
MotoPro Compact Tail Tidy/Fender Eliminator for Husqvarna Svartpilen & Vitpilen 250 amzn.eu/d/8aRixdm This is not a direct fit. Check my other video to get some idea about the extension.
@@greyandwhite9730 thank You so much for ur replt...I am planning to buy this bike...can u please provide ur fb , insta or whatsapp where i can contact u for queries in future
How much mileage r u getting bro
Don't know I haven't calculated. But I feel its definitely around 30.
Ur insta link bro