- 8
- 36 036
The Jelle Touch
Приєднався 20 січ 2023
Sanding and polishing 3 piece aluminum rim outer lip, barrel Jelle Touch Mobile Polishing &detailing
This three piece rim is getting a make over to get it back to its original factory look! explaining each necessary step.
Переглядів: 517
Відео
how to polish a twin steer checker plate fender! The Jelle Touch Polishing & Detailing.
Переглядів 570Рік тому
descriptive video on how to polish aluminum checker plate. with renegade products.
unboxing the Milwaukee 6600 rpm grinder and comparing it to dewalt!
Переглядів 222Рік тому
full unboxing video. it comes with all kinds of goodies!!!
Time laps polishing front of Aluminium trailer sanded and polished to mirror finish! The Jelle Touch
Переглядів 959Рік тому
Time laps on full front of a trailer. Sanding process, 3 steps of polishing. In this time laps its nice to see how I break it up in sections and have a seamless finish!
How to polish aluminum trailer, The Jelle Touch Polishing And Detailing. Using Renegade Products!
Переглядів 14 тис.Рік тому
well explained video on how to polish a flat aluminum trailer. what products I use! sanding to finishing!
how to polish checker plate/ diamond plate. The Jelle Touch
Переглядів 7 тис.Рік тому
I made this video to show you my way of polishing checker plate in cold weather! this shop had no heat or insulation! it was -12 degree Celsius outside and well below sub zero inside! I'm proudly using @RenegadeProductsUSA for many many years! and it never let me down! The products work amazing on a hot summer day and still makes high level mirror finishes on a sub zero kind of a day!
How to sand and polish fuel tank, the Jelle Way Explained!! with Renegade products.
Переглядів 13 тис.Рік тому
In this video is what I do almost every day and that is polish metals. I am sharing my way of polishing, what products I use and a bunch of tips and tricks.
Worse shape international truck detail and polish ever!
Переглядів 151Рік тому
international eagle truck brought back to life! the paint has multiple steps of polishing done to bring it back to life! all the aluminium has been sanded down and polished to get that perfect reflection again! and all stainless has been polished. the interior is been deep cleaned! it was pretty bad as well.
is the renegade bars or sanding make the hazy look? the clarity i get is sigificantly more then this.
Where do you get your backing pad for sanding ?
Simply slap it on , perfectly straight in less than a second
Absolutely one of the best step by step processes for anything I have ever seen, I’m going to try this myself sometime and use this video as reference for any questions I may have thank you!
Great job. Good info. Thanks
The makita never lasts they get too hot even when new
I dont think that respirator is working!
Nice video bredda
I polish concrete floors.... great job brother... Ill be using this information to polish my boat this weekend!!
I like your videos, I subscribed. I started polishing for the first time today, my 25’ aluminum trailer. I sanded 220-320-400-600, I bought the Zephyr kit and a Makita variable polisher, Did my cut with orange and brown but no matter how tight my passes are I keep getting hazy lines . I have no idea what I’m doing wrong, I tried lots of compound and other sections with less but alway getting the same result. It’s pretty cold here 6 degrees Celsius maybe that’s a problem, It has a slight haze to my finish and shows up worst after I colour it with a green joker wheel and green. Hats off to you this is hard work
Thanks for video
Great work. So satisfying
Great video bro!!
Appreciate it!😎
Wow
Great video bro!
Great content. Can you do a video on polishing over various rivots?
when I do a trailer rail I'll make one!
When u have them to that point how do you maintain the shine?
Hand polish to maintain or buy some aluminum sealer like SHINESEAL.
@@TheRoadhammer379 I like to hand polish it to maintain.
What is used to protect the polished finish? Wax?
the finishing compounds have sealers in it.
Why not use a chem or something to remove all that build up before sanding? It would probably save you so much time.
It honestly won't save me a lot of time as the buildup sands off within seconds and I'm after the pitting. So if I use a chemical like acid the inside of the pitting will show white. So it will be harder to see in the sanding process
thinking about getting into this as a side gig, whats your price points if you mind sharing? hourly rate or by the size of the job?
How much do you charge per hour for work like that?
charge by the piece
Off to make 5 grand now
Lol yeah and than some 😅
Hi there! I have a Pet Grooming Trailer. It is made with .040 aluminum trailer and it is all white. I do not know the differences in Aluminum but I am told it is .040 aluminum and it is white not silver. Don't know the difference but I would like to buff and wax. Any suggestions are greatly appreciated!
Could you send me some pictures to jelletouch@gmail.com than I can see what it needs. Thanks.
How much u would charge on a job like that?
Tanks start at 180.
Why are the pads that i have so hard
Cuz u need to soften them with the wood tool withe the metal teeth he is using.
Im having the hardest time getting a clean look and clarity on my tanks. I have hazey streaks left by the wheel that will buff out if i use lots of compound but the wheel will just leave more streaks somewhere else then. I took a short video if you wouldn't mind watching and giving me your opinion. Im almost ready to give up it's very frustrating. ua-cam.com/video/GcmLPCyq9ng/v-deo.html I sanded beginning from 120 up to 800 and then I use my orange wheel and brown compound at 3200 rpm. It seems no matter how hard or many times i go over a section it will leave hazy marks or streaks. My yellow wheel with green compound will leave marks and even my white wheel with purple even leaves marks that i have to fix by trying to go over with my cuts again!
It sounds like you going to need to use some more speed like a 6000rpm grinder for cutting. It's a bit more dangerous and the grinder is heavy! But of you sanded down from 120 to 800 I'm sure you can use a 6k it will give more heat so also more shine
@@thejelletouch thanks for the tip! Maybe that's the issue cus Ive gone over these cap ends so many times. It's always the end caps of the fuel tanks that give me trouble
@@thejelletouch and I realized that my yellow and white wheels aren't leaving marks they're just revealing the improper cut
Awesome, how many hours did that job take, wow!!!
About 80
About 80
@@thejelletouch $100 an hour or ore I hope.
A lot of hard work for a beautiful ending
A lot of hard work for a beautiful ending
Really curious on how much that cost?
alot
About 80 hours labor at 75 and 1500 in supply
Very nice work not everyone is going to truck shows it just proves he works the trailer
They flipped and sold the trailer
How much is something like that cost? I have 150 tanks
The average tank goes for 180. Tanks all the way around off the truck start at 275 It includes 2 steps sanding and 3 steps polishing every additional step that's needed 20 extra. If you legitimately have 150 tanks I will give you a better price. You can always give me a call for more info. 506-961-5616 thanks and have a great day!
i know this job PAID. Looks great man.
How did the 6600 work out?
Absolutely garbage, burned the motor in under 5 minutes
What is the recommended RPM for sanding?
I usually sand between 3500 and 5000 rpm. Beginners I would recommend not to go over 3500 until you master it.
My brother, what do they call that liquid that squeaks at him?
Wow, buddy, that was awesome to watch. Man, your sanding cutting is on point
Awesome work on how to do it buddy.
Thank you!
I just became a fan
😎😎
What part of New Brunswick?
Sackville
I struggle with plate but I see why thank you
Looks great man! Love the videos!
Yeeeaaahhhh buddy!!🔥🔥🔥
One of the best In the business!!!👏👏🔥🔥
😎😎