Відео

My pleasure! I'm always glad to help people keep their truck on the road.

@@PlasticRealmToys I fully agree. Their wordplay always kept me hooked, especially Vast. I still find myself catching things that I've heard for decades but never fully comprehended.

Thanks for watching! I ended up getting some more because the child in me can't stomach not seeing the rest of the set. Video coming soon!

By a mile, at least.

My buddy had a Genesis when we were kids. I'll never forget my first time playing Sonic. I hadn't seen anything beyond NES in person at that point, and it blew my mind. I remember thinking the rings looked so real!

Same feeling about it. Like how is this possible 🙆

I "m glad you found it and enjoyed it! I wish I still had the other disc for this, but it was lent to someone 20 years ago and never seen again. I'm trying to upload a few more mixtapes in the next few weeks, though. Check back soon!

It's just over 2 quarts, but don't go by the bottle size. It's much safer to fill and check the level as you go. Too much can destroy your rear diff.

And the torque spec is 18 lb-ft.

@@funcle_kevin thank you!

@@funcle_kevinAppreciate it, and great job on the video! Us poor people appreciate it!!

@@pittsbirds1656 The pleasure is mine! I'm always happy to help people save money and keep more of these trucks on the road!

I appreciate that. I always try to respond as quickly as I can. I know how frustrating/ scary it can be when you're in your driveway and something doesn't go as planned!

You'll be fine. I actually did the same thing last week when I hit the selector by accident and had no idea where I was in the range!

You're still okay (replying to both just in case someone else runs into the same issue). You can manually adjust either while and just make sure they are set the same when linking things back up. If it's not right the first time, it's not a big deal to hop back under and make the adjustment to the selector.

No doubt. I'm glad you found it.

@@funcle_kevin no doubt...a gem. U got the night Pac died on Hot 97?

@@rasx I don't, unfortunately. I had just gotten really lucky with the timing on this one.

@@funcle_kevin damn, ok. been searching for years

@@billmort3819 That's awesome! I don't remember even hearing about errors in hockey cards, now that I'm thinking about it. I wonder how many I've overlooked!

its not an error because his name is spelled wrong on everyone of those cards.in order to be an error their has to be a corrected version and their isnt.but yea its spelled wrong

@@18wheeler76 It's still going up as an eBay 1/1!

@funcle_kevin people can list whatever they want and title it however they want.its more like 1million outta 1 million

I thought their plan was to get into vintage, but what I remember seeing on their website is no longer there. Either way, I agree that they should be the gold standard for grading. Time will tell.

@@bryanlyle That is correct. I always recommend just a gasket. Some people like RTV, and I've seen them used together but it always leads to a mess. As long as there's no pitting it the mating surface, you will be fine.

Thank you for your kind words! I'm glad you enjoyed it.

Thanks for checking it out! The Starting Lineups do okay but aren't anything to plan a future with. They're in my category of "not going to retire off of them, but they'd make a cool addition to someone's collection." Overall demand isn't really high, so the customer is usually a little extra pumped to get a sort of rare addition at a good price. I'm going to sub to you. I look forward to checking out your cards!

It shouldn't be too hard, but you might be able to avoid replacing wires altogether. If you can wiggle the wires when the gauge is not reading properly and that causes the gauge to read as expected, then it is likely that a wire is frayed or broken. If you wiggle the wires and nothing happens, it's more likely just the sensor itself (this would be my guess even without seeing the overall condition). If you can identify that the wire is broken between the plug and the main harness (or if you replace the sensor and nothing changes), you can buy a replacement plug and short wires fairly cheaply. Splicing that into the harness is pretty straightforward if you've ever installed a stereo or something similar. If there's no obvious break before the main harness, you can test the entire run of wire from the plug side near the sensor, to the ECM side (while ignition is OFF) using a multimeter. If I had to guess, I'd say it's only the sensor and possibly the wires before the harness. They are pretty well protected the rest of the way, but there is always the chance of a hungry mouse causing damage. Swapping the entire run wouldn't be too hard but it does involve swapping wires in the ECM plug, which adds a small bit of complexity. If you're not comfortable with that, it should be around an hour of labor if you have a local mechanic you trust.

My pleasure! I'm glad it helped.

My pleasure! Thanks for checking it out!

My pleasure! I hope your fingers made it through the job in better shape than mine did!

Centering was something that I didn't give as much attention to for some reason. Rookie submitter mistake.

Right on. I was honestly overwhelmed with the flood of information on their site and didn't know where to find their metrics when I made the video. My next reveal will (hopefully) be much more polished. I appreciate the input!

@@DanWright-w7x That's a great idea. It would definitely help preserve the threads. I think I'll only be able to use mine one more time before I need to replace it.

@@articulatingprimate6980 I do. Why do you ask?

It can be tricky. Make sure the guides in the pitman arm line up with the steering gear post. It's a tight fit and will only slide a little without mechanical force behind it. Making sure everything is aligned is the important part.

Thanks for checking it out and subscribing! I just subbed your channel. I'm a big fan of random s**t so I'm always excited to find other channels that don't stick to just one niche. Old school UA-cam is making a comeback!

Thanks for checking it out! I agree and hope TAG and the tech behind it catches on but the more I talk to people, the more I worry PSA won't be losing the crown anytime soon. Hopefully PSA either buys TAG, or one of the very big sellers/YTers starts propping them up.

Thanks for checking it out! I'm rooting for TAG because of the accuracy but those numbers definitely don't make sense if trying to resell. I have a few NFL cards I'm sitting on until the season starts. Hopefully football fans adapt faster than baseball fans!

@@funcle_kevin Same, nice thing is it’s not another random start up company. At least they’re doing something innovative. To be honest it may help me make sure I keep PC Cards that are tag lol knowing the money I put in and won’t get for resale

@@zoestertoaster27 I completely agree. It's going to take a long time, if ever, for demand to bring the prices up enough to make TAG a viable option. It's a shame.

Yeah I sent a few cards to tag for personal collection bc I like the clear slabs and the dig report. Definitely won’t be selling though. I like both grading companies.

Absolutely. They seem to be stricter with their grading all around, which isn't necessarily a bad thing but definitely something people should consider when deciding where to send their cards.

@@funcle_kevinnot a bad thing at all that’s what you want unbiased assessment Curious if they do die cuts have a kyler crown Royal auto I’ve been wanting to grade

@@NobodyUR It's my understanding that they don't do die cuts right now but are planning on starting to grade them soon.

@@funcle_kevin yeah I looked into it after posting . Bummer.

I'm glad you enjoyed it!

Not looking good right now for TAG. I have a few watchers on TAG cards that are listed below $20, but no one is pulling the trigger.

Because buyers are retarded

Thank you! I'm glad you enjoyed it.

I just ran a head-to-head comparison between TAG and SGC. The SGC card sold for 2.5 times more than the exact same TAG card. The TAG card got more views. People know about it, they are just not interested in buying.

@@funcle_kevin I would buy TAG all day at a 2.5 time discount.

Most collectors know about tag it’s all over hobby message boards. There is a video of a guy resending in a card and it also gets different grades so it’s not dialed in yet. My guess is they will sell off to one of the big companies anyways.

@@joemofo5689 I haven't seen that video, but am interested. I've seen 2 where people send back their cards and not only get the exact same grade from TAG, but also get the exact same cert number.