Відео

@@Remmst9-tc7ms heck yeah! Thanks for watching and commenting!

@@GuitaristJesse2442 I don't really have a preference. I believe the only difference is the pole pieces

@@xounlistedxox Great! Thanks for the fast reply! Currently binge watching all your Yngwie Strat Vids :)

@GuitaristJesse2442 any time! I keep my notifications on exactly for that reason :) Let me know if you have any questions along the way 😁

Definitely worth trying out! I like these pickups more than hotter strat pickups like hotrails etc because these can get tones more like traditional strat tones and still can get some great humbucker tones as well, especially with an OD pedal

@@xounlistedxox thanks for your comment !!! It s the same coming from almost anyone else !!!👍👍

@kidwave1 the board protects the inside springs etc, the foam is to help insulate it from excessive vibrations

@kidwave1 unfortunately I do not, if you run into any issues feel free to shoot me a question!

@Samhain-cd1gq yes I've tried those as well. Those sound very much the same as the later ones that go throughout the 90's. That's why I kept the early vented T75's

@MojaveJazz I grabbed a morley hum exterminator, and it fixed this. Wound up ditching that pedal for a much better pedal though. Radial tonebone iirc

@@ayoluca1 thanks for watching and commenting! I set mine up with a bit of a hifher action, so I've never really covered that on my channel

@@indigomartin2150 here's the DT settings: ua-cam.com/users/shortsUAjurcVR4T0?si=7f4UX7HMr3ohymzB

@ thanks so much bro! would you happen to have the rev F settings as well?

@indigomartin2150 I'll grab those at some point today hopefully

@@indigomartin2150 updated the settings in this video description!

@@Jimboishere11 they are all very nice guitars!

@@Dizzy55555 thanks for watching and commenting! I cover that and a lot more here: www.rig-talk.com/forum/viewtopic.php?t=187200

@AmericanNationalist852 I felt the same, but once I played the Custom Shop, I didn't care about the bullet anymore. The playability is so much nicer. And yes, for the pickups I'd imagine Fender likely routes YJM'S guitars deeper in the pickup pockets because there's no way he'd be ok with the middle pickup not going anywhere near flat.

@AmateurHourAuto much appreciated! Thanks for the kind words! Yes, the PMEQ is going to be the best bang for the buck if you solely want to go for Metallica tones. Check out my PMEQ Shootout video to see a couple other reasonably priced PEQ's that give great results without costing a fortune! I've heard mixed results when hearing about the PMEQ being used with Marshalls, but one way to find out!

@777BULLDOZER thanks for watching and commenting! The PMEQ is an awesome pedal!

@lincolnbroke that I don't know unfortunately

@sigiligus hey, much appreciated and thanks for watching and commenting! Definitely agree! There's a ton of videos of YJM clones playing his stuff with all of his gear. These strats kick ass for a variety of tones, Far Beyond the Sun of Yngwie 😁 I should pull out one of them that's in drop C# and do some chunky stuff! The clarity you get from these pickups is absolutely bananas. Switching back over to any traditional humbucker after playing these truly shows how muddy the traditional humbucker design is.

@@coolguitar88 I found out about Joe Stump just by listening to the YJM station on Pandora haha. Thanks for watching and commenting!

@axeslinger Much appreciated! Thanks for watching and commenting! The features are the same and while the ST68-185YM is a fantastic guitar, it doesn't compare in build quality to the Custom Shop. I rarely play any of my other YJM's anymore after getting a Custom Shop. They're definitely a cut above.

@@xounlistedxox Your blessed. Keep rocking man.

@@lucaungarelli5630 no pedals used in this

@@larslevinberget9558 thanks for watching and commenting! It sounded much better in the room!

@1982PHANTOMLORD unfortunately this was long ago and I don't have the info on how it was dialed in

@@xounlistedxox OK MAN. THANK YOU ANYWAY. I´LL KEEP TRYING.

@1982PHANTOMLORD sorry I couldn't be more helpful my friend. It did take a lot of knob twisting to get here

@palmergriffiths1952 thanks for watching and commenting! Metallica tones provide a perfect example. Invader sounds more Master of Puppets, EMG Sounds more And Justice for All. Invader is a little fatter and has a little more sparkle. EMG is more compressed, which pronounces mid range naturally and tapers off the highs and lows. The Het Set is somewhere in the middle and does a convincing job at replicting any era Metallica tone

@@xounlistedxox You're Welcome. Keep up the Great work on your channel 👍Like I said earlier I have the invader myself. It's in an Epiphone Sg and I quite like it. My understanding is that James Hetfield apparently used this pickup on Kill em ' All , Lightning and Puppets than around the touring For Master of Puppets he switched to EMGS or am I wrong on that ? I've looked up The Het set here in Canada where I'm from they're quite expensive. Don't know what they go for in the U.S. I Have an additional question have you ever Tried Glenn Tipton of Judas Priests signature EMG pickup ? I hear it's supposed to be really good.

@@palmergriffiths1952 Thank you, I appreciate that! I've read many places that the invader was possibly used on MoP, but I don't think I've seen any photo evidence of the Invader being used. That said, with how mine sounds with my C++, it's very likely that it was used, at least for MoP. Then, while on tour for MoP allegedly they first received the EMG's. I wound up snagging an LTD Iron Cross with the Het Set and do really like it. As for Tipton pickups, no I haven't tried them

@@xounlistedxox They say they're good. I haven't tried them myself. ESP put out a signature guitar for Glenn Tipton and they have his signature EMGS in it But you can also get his pickups separately. As well I seem to recall that James used a tube screamer on Ride the Lightning to overdrive his Marshall Head I also heard that apparently he didn't like the sound because supposedly he was quoted as saying he found it sounded over saturated. Myself I love the tone he had on Lightning. Just my personal preference but I like it even better than Puppets or Kill em ' All. I also love the Production that Flemming Rasmussen did on Lightning.

@palmergriffiths1952 I've tried a ton of pickups over the years and am happy with my current selection. This includes EMG 81/85/60/Het Set/Jim Root set Duncan EMTY Blackout Duncan Invader Carvin M22SD Active/Passive DiMarzio Super Distortion DiMarzio HS-3/HS-4 Duncan Fury Bill Lawrence L500XL Kiesel Lithium And quite a few others I can't remember lol. My pickup quest has definitely nearly stopped

@Azzopardi1985 apologies for missing this comment! For some reason, no notification was sent to my phone 😑 I've been asked a lot about it, so I made a video to show, much easier to see than to explain! ua-cam.com/video/suyQ6u9V6pM/v-deo.htmlsi=wddbvAXj3Zu8gmjy

@@xounlistedxox Thank you! :)

@@777BULLDOZER thanks for watching and commenting! Did you snag one or two EQF-2'S?

@tman6495 I just copied what Boogie does, lol. No heat needed to shrink since the shrink tubing fits snug as it is

@@777BULLDOZER much appreciated, thanks for watching and commenting!

@lucasmagnozzi thanks for watching and commenting! No pedals here, but there was a PEQ in the loop

@@joshuaramirez thanks for watching and commenting! It sounded much better in the room!

@scription7277 I only use it for the noise gate, and the noise gate itls really good. The compressor, either I don't know how to use it or it's not very impactful

​@@xounlistedxoxThanks for the info.👍

@@scription7277 any time!

@bcaz84 Unfortunately, none of the local stores actually carry the YJM strats in stock, so I haven't had the opportunity to try one myself to confirm. If you're new to a scalloped board, this will be a common problem no matter which year you buy. Just gotta practice until it's a non issue. Thanks for watching and commenting!

@@xounlistedxox thanks for the reply, ill grab one.

@@bcaz84 any time!

@@xounlistedxox I bought a YJM strat, its incredible. the high E slip is no where near as bad as I thought and I have no problems with keeping the current bridge.

@@bcaz84 glad to hear it! What year is yours?

@lastjedii mothers would be another gold one, you could also use car wax as well

@straitouttahell absolutely agree! The C++ has more in the room feel too, but like you said, on the mic, on a stage etc, there's so little difference most folks won't be able to tell a difference. Thanks for watching and commenting!

@@777BULLDOZER much appreciated! Thanks for watching and commenting

@seantalkingthroughthemedia4838 thanks for watching and commenting! Each has their own pros and cons for sure, each have a different purpose

@xounlistedxox absolutely! Now i do have a used v that came with het set, but I swapped after hearing 81 in person. No regrets

@seantalkingthroughthemedia4838 the het set lies perfectly in the middle between the EMG 81 & Duncan Invader IMO, allows you to more easily chase early and late Tallica tones without switching

@zhangbowst hey, thanks for watching and commenting! Yes, you are correct. I measured at the nut and 21st fret, but used the neck wood as the guide

@Chillnote at full volume they're all so similar! At half volume much different story. But the nuances are there!

@@Chillnote much appreciated, thanks for watching and commenting!

@marcobelgioia8382 it's USA, 2016 neck with mid 2000's YJM body