Відео

Those springs need to go on facing certain directions…

I have an Apex trigger that is giving me light strikes, and Apex has blamed it on the trigger bar. They've basically told me to kick rocks after I tried multiple trigger bars with the same result. i have had no reliability issues with the stock trigger. If i tossed an Overwatch precision trigger in am I likely to get a working gun, or is there something inherently wrong with my pistol that will only make it reliable with stock parts?

What size is the screw that holds down the silver plate?

Is the distance to trigger face the same length as OEM?

Terrible video, excellent trigger. Yall need to slow down and show close ups and orientation. That sear disconnect spring was a major pain until i realized i could push on the disconnect and pull the pin right out with some needle nose.

A shield plus install would be helpful

This doesn't show how to put the trigger shoe onto the trigger bar. That pin on the shoe is so tight when I went to install it the pin flattened deeming the shoe useless now

Is the same for apx gen 1

Will this work for the APX A1?

Mines started causing trigger reset problems so I went back to the stock trigger and no problems since then

Slow it down. Take a little more time.

Big OWP fan here....have well over a dozen on Glocks (mostly TACs)....one recommendation on a video like this: Show the take up and reset of the trigger once installed so people have an idea of what kind of audible reset their going to get as well as travel reduction. Keep up the great work! Planning to order one of these for an Echelon tonight!

Possibly the worst instructional video I've ever viewed. I regret purchasing your products.

UPS literally just dropped mine off. I’m bout to drop it in now. Let’s go Overwatch 💪😎 New Short Coming Soon!

Will this be a good trigger for a PDP compact?

After beating the shit out of the roll pin I got it installed but now it's seems to not reset sometimes I think I'm going back to the stock trigger

Is the reset more audible/tactile now with this trigger shoe?

Not a great video, all the jumpy cuts and lack of visible detail on how the parts come apart and go back together.

Just installed this on my nephews 2.0 ! FRICKEN amazing! would say less of a trigger pull than the Timney and short af reset! the only thing was the middle shoe safety kind of binds when the pressure doesn't come from straight 90 degrees

I Need help. got an M&P and installed the same comp, lots of malfunctions. did you change out your recoil spring?

This is an ape A1. Shoulda specified.

Yea I know this is an older video but I just got my TAC trigger in last week and installed properly in my Glock G45 and it feels amazing and break is very nice and crisp. But… lol but I’m having this crazy gritty feeling on the short take up. It’s like there’s resistance of some short on the take up to the wall. I also purchased the Overwatch Precision connector but I didn’t install it with the new TAC trigger. I did Google gritty Overwatch trigger and it said it’s something to do with the tooling marks where to trig and connector meets. But I put some Clenzoil grease between them as I do with all my Glocks. My question is what else could that gritty feeling and sound come from ? Anyone with a Glock and TAC trigger get a smooth effortless take up to the wall ?

Just did this swap - started freaking out when the stop pin seemed stuck. There is a little trick with some PB plaster, Tac light installed on the rail, and auto body hammer. Worked like a charm. Message me if you’ve got questions.

Poor video had to freeze multiple times to see orientation but still was able to follow it. Those having trouble with the trigger shoe pin like I did, use a small c clamp with some painters tape if you don't want to scuff it. Worked like a charm!

Not sure how many times it needs to be said, please make another video. Cut the music, slow down, and show up a better run around of the pieces being put in and taken out. This is hell

Just enough instructions to know I am taking it to the gunsmith

Welp...I guess this installation is out of my wheelhouse. My gun shop might be able to handle it.

Trigger bar spring came out and i can not get it back in. Do you have any tips

I would love to do a review on this and give you real time reaction as it will be a first time for me

How is the vs falx kit?

I've spent 10 minutes trying to seat the trigger pin. halfway there

Well since your website is so terrible, i guess ill ask here. If i want a trigger for a shadow systems, i assume i get the gen4 glock trigger?

This was absolutely confusing because the camera was so zoomed out you can barely see what's being worked on. Finally got this done after 2 hours

Can you tell me which of your triggers has the shortest trigger reach, falx or tac? Im liking the looks of the Falx. Only reason i ask, i cant bend my last knuckle on my trigger finger and a upgraded trigger may be my best bet. A 1911 shoet trigger has always been my go in 1911's, but my 2.0 compact is my edc and i hate the trigger.

Very cool trigger, it's possible to watch a video about the dynamic characteristics and specs of it, please??

Horrible! I don't understand why people would have instructional videos with music blasting throughout the whole video. It's very distracting and we don't need to hear all that music as loud as possible with an instruction to install the trigger. I hate that

Please, make another video without the music, with close-ups, and at a slower pace. I was so excited to finally get the trigger kit in the mail, but immediately stopped following your directions and put everything back in the safe when i realized that i was going to fuck something up on my new hellcat if i kept following this video.

👍

This rules.

I pride myself on being pretty mechanical and skilled with my hands, done a lot of homeschool "gunsmithing". Buuuut after giving that slide stop 3 good smacks with a 3lb hammer and her not even budging i gave up. For the first time ever gonna have to take it to an actual gunsmith. 😢

Just ordered mine.🤠

Very interesting trigger design choice to use NP3. I am considering the product, but for those who want more detail, watching the installation from Apex and M-Carbo will help with this one until you get to the disconnect portion.

I can tell you, this roll pin is one of the worst I’ve ever dealt with. It’s so stiff, and it’s barely holding the trigger safety spring and lever in place, that when you try to hammer it in, it deforms the aluminum trigger shoe and I lost the spring. It wasn’t even advanced far enough to allow for light taps progressing to the necessary force to make the roll pin move. I am very dissatisfied with this product, and I am no stranger to trigger installations or Overwatch Precision products. I have three of your triggers and easily installed them before. This one is a nightmare.

Need to send one off to a reviewer and get it out there.

Unwatchable with the music and angle.. sending mine back

Bent all punches trying to get slide stop out. No matter what size or brand. Using 3lbs hammer. Torch didnt help either.

I just installed one of these on my spec series it made a huge difference in smoothing and lightening the trigger over the factory junk !!

I can’t seem to find any install videos for the Beretta APX line to see if i want to buy this trigger shoe and install myself. seems there at a lot of other brand vids on you tube. don’t want to send it out to Overwatch or a smith! thanks

Just got mine and the hole doesn’t align properly with weapons frame. Followed advice install video but the gap is too big to just “apply pressure on a table” like the video says. Please post a fix

Just got mine and the hole for the screw doesn’t align properly with the body. Any ideas on how to fix it without having to sand away frame?