Відео

Nice

Ur video is only time wasting

That's right you are not responsible! You are a sweetheart for helping us all. Thank you for offering what worked for you. I am going to try it.😊

I have a 2005 Cadillac CTS 3.6 l crank no start I tried what you did with the wires one of the first things I tried I knew about that trick and also I bypassed the ECM and still no crank no start IDK if I'm getting fuel to the fuel rail from what I'm understanding is that the intake needs to come off or the coul underneath the windshield wipers also when I'm cranking the car over it continues to crank for about 2 to 3 seconds without me holding the key in the crank position I let go of the key and it cranks for a couple seconds by itself and then it comes back eventually after a few seconds but still does not start and also after trying to start the vehicle several times it smells flooded so I assume I'm getting fuel but not 100% I hear the fuel pump kick on when I turn the key but then again after cranking no start even with a jump no start the battery is brand new I also did a throttle relearn I change the purge valve I also change the crank sensor I also put a new ignition switch in and it remains to crank no start and continue cranking without me holding the key into the cranking position the car stops cranking by itself and returns turn on key position I feel I have tried everything I also use my scanner and it through no codes if anyone has a clue where I can go next that would be great I bought a fuel pressure tester to test the fuel rail

I have the same issue! 2004 Cadillac CTS. This is a great idea! I am going to do it!

what numbers were the two slots that you jumped. There is a 85, 86, 80, 87

That’s a kick-ass hack yo! Ima try it on my 04 CTS. 🤙🏽

If you not mechanical inclined don’t post it

Thank you sir much appreciated

Oh my god it worked,,, My bud has a 05 Cts and has changed everything,,,,, Thank you

Damn!, don't try this!!!!

Ive got the holden VZ Commodore 3.6L australian version anyone having this issue also try and plug a obd2 scanner into the obd2 port for me my ecu is basically catcus i have to keep a scan tool plugged into the obd2 port and it starts like nothings wrong and thats how i drive around just dont unplug it while driving haha

How did you get the cover off of the fuse box?

Ngl ur clipping the speaker ik it doesn’t sound good when u open the trunk it does when ur in the front but it’s gon blow faster if u keep it like that

Thank you Jake, bailed me out of a tow - worked great, thank you!

You have a bad chip in your key...get a new key from the dealer.Been there done it all...

I did a personal job like what you did and totally fix my cad . Used a fixed Obd port device to reset check engine lights 🤙smart kid

Whats the actual fix? What has failed?

I got the same problem!!, might give you a shot..

The battery cables are properly bad that’s why it won’t start, you would have to voltage drop the positive and negative cables

Hey buddy, thank you for that great advice, you make my day. 😊🎉 Regards from Switzerland.

Great info and Tips... It would be good to put an inline fuse in the mix just to be on the safe side

Bro really said 2006 Cadillac, nah this bih a 2024 with a push start 😭😭😭💀

Can I put a 2014 , 3.6 cts motor in a 2008 CTS that has a bad 3.6.

Thank you bro

Previous owner didn’t program the ECM to the cars vin that’s why it “didn’t work” either that or the key still needs programmed after changing it

Can you help me? I have a 2004 Cadillac deville and the key is stuck in the ignition. Will this possibly work on my car?

My buddy had one of these that the same exact thing would happen.

You are a real one

I bought my 05 cts $50 😮

Great job

Cómo sacar cilindro ignición de cadillac2003

Great video, i did not know about such a easy made push button in Amazon. Thanks, you 17 yet smarter than many so called mechanics in Atlanta at least.

I LEARN i lot with this car and i still have it

Thanks 👍 one day m'y car just shut down when i Drive and another Day the car dont stop the push button dont work i take out the battery and the car still running 😂

Did you try replacing the relay?

Thank you! The relay jumper got us running. You saved the day for my buddy. Seriously, thanks a lot.

Great video 📹 and illustration

😎👍🏽👍🏽

Do you know about not having heat in the car cause its blowing cold? And its a cts 05 170k-180k what maintenance do i do?? I want to give it the dealeship but its not gon b worth shi 😩 and then also i keep hearing a thump sound everytime i switch from park to drive.. its making the sound in the trunk area

Everyone around calls me mcgiver

Hey I like your approach I did the same on my 95 ford 150 fuel pump but I hook it up to a relay that was hot and boom been riding ever since I also put a Chevy radiator in my truck with a electric fan of a Toyota four runner and it runs cooler

That’s a fresh ass push start😂🔥🔥🔥🔥

The computer is bad. Low Battery caused that.

It’s crazy how hard these entry level skars hit and they can be hella overpowered and handle

Once you stick a wire into the two slots and the engine starts, do you just leave the wire in the slots and drive? Or do you take the wire out once the car has started? I have the exact same model and year car and it suddenly won't start or do anything when I try to start the car.

Got a 2007 cts 3.6 Car shut off while I was driving home from work, now doesn’t want to start at all, no power, and key is stuck in the ignition. Any pointers or tips appreciated, just wanna get my car back on the road. Starter relay has power, only when taken off and replaced with a hot wire.

Got a 2007 cts 3.6 Car shut off while I was driving home from work, now doesn’t want to start at all, no power, and key is stuck in the ignition. Any pointers or tips appreciated, just wanna get my car back on the road. Starter relay has power, only when taken off and replaced with a hot wire.

Kudos!!!!! That was a great video. I’m having that exact problem and can’t wait to get home to try your solution…To any extent your video was fantastic…Keep making more..

I have an 07, CTS 3.6 base model. I’ve never had this happen in all the years I’ve had this car!