- 39
- 52 976
DynaMike RC
Приєднався 19 лис 2012
All about RC cars and modifications! Tune in and get ready to rev your engines with these videos that are all about RC models.
Відео
Were they serious for Arrma Infraction?
Переглядів 3473 місяці тому
Were they serious for Arrma Infraction?
Speed test! Arrma Typhon Grom brushed to brushless
Переглядів 5 тис.5 місяців тому
Speed test! Arrma Typhon Grom brushed to brushless
Arrma banner , Arrma place mat and Grom shocks
Переглядів 1098 місяців тому
Arrma banner , Arrma place mat and Grom shocks
Spektrum 6500kv brushless going into RC
Переглядів 1,8 тис.Рік тому
Spektrum 6500kv brushless going into RC
boot n scoot n boogie. xD 16:50 😁
You almost broke the body 😂😂
Nice yard man, you need a few more ramps 😊
Put a battery strap around the battery 🔋 house 🏠😮
I've had my typhon grom for a while now and mine is broke in it does 25mph now 😮😎👍
I just picked this system up myself. What did you end up putting it in and how did it work?
It went in my Mojave Grom I may post up a video but first time had installed my pinion and spur wasn’t correct mesh , like loose So couple days later went in and fixed it So far runs great Thanks for asking
Great video! How has the diffs been holding up?
Diffs , so far so good I upgraded diffs on typhon grom , and of course Mojave has V2 diffs stock Granite Grom still runs V1 and doing fine
Awesome deal!!!! I love my Infraction. Happy RC'ing Y'all!!!!
Losi 😮😢
Yooo. Nice!!!
Wow bro u got an amazing deal! I have one is amazing! Enjoy.
The saltwater is not good for your rc car trust me it will kill your electronics 😮
22mph is awesome for stock brushed 1/18 scale.
Nice run I thought the Gorgon was going 65mph
It was pretty wild keepin her steady she’s bookin it
Nice job! What gps you are using?
GNSS with my Sky RC app
🔥🔥🔥🔥I got Infraction 4s
What wheels are those?
I think picked those up at local hobby store , just some 65mm tall 12mm hex street tires Paid around $15
Do you have an update video? I'm about to get mine
I installed this in my Arrma Gorgon With 100 amp Esc
@mikeshoup7122 was it fast on 2s
Oh and what size is? Is it comparable to a 2847
Yes that one is 2800
@@mikeshoup7122 hey thank you very much I just wanted to make sure it was that size because I'll be replacing the 2847 - 4000 KV with this one. How have you liked your setup and are you able to run 3s on it fine
So that's what I thought but just because it has the 2800 number on it it's actually a 3650 size. All the motor mounts fit a 3650 and also all the cooling fans I wish they would say that but the box it comes in it does now.
Ok. I also just ordered this for my 1/14. I did read people using 3s and 4s on this?
I don’t know about running 4s But Spektrum 85 or 100 amp ESC is perfect match with that on 3s
I think the perfect speed for that little guy is between 30-35. Great video bro
I thought above 4000kv on a 2440 size brushless can, can only do 2s because temps will burn it up… 4000kv and under on small rc is doable with three cell and ok temps….
Yea was curious about same thing So spoke with hobbywing They said it would be fine on 3s Considering brushless electronics I get around 8 mins of running time and I usually stop around then On 3s
Great video dynamike!
Thank you !
Your welcome
Maaan, I subscribed because of your DOPE Az Intro 🫡
I appreciate that 👍
👍
Just ordered this exact motor n esc on Amazon. does it get super hot running on just 2s too? I see you went with another combo for you typhoon is this kingsval still good?
My kingval is still good yes And 2s is great , just 3s if run hard It gets pretty hot I could gear down with like 16t pinion and deff would help
Nice setup and speed runs Bro. I went and run mine (typhon grom) today. doing a brushless system makes this car so Adorable!!! lol, thx for sharing...
What esc are you running
So I believe that went into my Gorgon And it has Spektrum 100amp esc
Is that the spektrum spkmx2800 motor?
Yes indeed 👍
Awesome 😎
nice vid, let us know how it goes with the quickrun hw motor that typhon.
Yes , just put up vid showing my speeds with 18t pinion Electronics get pretty toasty , maybe 10 mins running 3s
@@mikeshoup7122 brow, it was cool 47mph is more that enough in that little beast. I did see the vid. Thanks for sharing.
That 2435 is going to have your typhon moving out with that set up
Shouldn't it be faster on3S and 6000KV ??
Yea it’s pretty fast with what I have in it . Just added a arrma receiver box Little more protection to keep dry
Use a temp gun for best results
Tell em’ mike! Love the channel man, good clean running footage and your opinions as you run. Good stuff, almost like earl Moorhead Gorgon sounds like it could use a tighter slipper or new slipper pads maybe?
Hey , appreciate the feedback And you maybe on to something with Gorgon Good looking out bro Thanks for comment
This car is awesome, we convert to Brushless and it is a beast on 3s 💪😃
I put this motor into a 1/16 car and it went over 80 mph
Can you find me one like that for $85?
Cool stuff Mike! I wanted to see that Gorgon wheelie 😀 Like what you did with the makeover, I keep going back and forth on if I should get one.
Thanks for saying that, bro ! If you do decide to get one Let me know
@@mikeshoup7122 I did! I just ordered the blue one. And an orange body kit 😁 love the whole black and orange color scheme. You made it look good 👍
This lil thing is bonkers, nice work Sir😂👍
I like the vest! Where'd you get that you said a can cozy? I need to know!👍 I would like one for mine
Believe Amazon Military style can cooler
@@mikeshoup7122 awesome thank you so much dynamike
Good deal and video my friend as usual!!👍👍 Keep the great content coming! That's the brand new 6s 150amp firma also!!
Great deal!
You got a phenomenal deal on this rc . I have my eye on one up for sale right now
Bro , is it not a deal ?!?! I honestly didn’t care for a fireteam or never thought I’d own one But couldn’t pass it up for $85
That thing goes! 😎💯
new subscriber. great video. regarding that side of the cars body hitting the power button, my first thought is I would consider using a concave cap from a water bottle and mount on top of the power button to prevent it from being touched. I ordered this truck last year. Hope I attain it some day. I highly recommend that all avoid ordering from "tower Hobbies" I know I do regret having done so. thus far at least. Hope I receive what i ordered in the near future. Best wishes n happy trails.
Yea I’ve thought about either moving the power button or what could I use to protect it . And yes I’ve heard bad things about horizon/tower hobbies They are all over the place , ever since those 2 merged together it’s been hectic Anyways good luck to you and thanks for the sub 👍
Damn! I’d be cancelling my order and just going to my LHS! Show those little shops some love guys, they’re the ones who can make tracks pop up and keep parts in your area!
What spur and pinion did you use? I thought to change the spur you needed the blx slipper thing the red one
I changed the spur gear/assembly over to 0.8 mod 57t and used 21t pinion gear I think that’s correct , been a bit since i did it .
Cool stuff
I fried my esc already 😂
It’s a wonder mine hasn’t done same thing already .
I don’t mess with vehicles like that with the kind of motors I rather have a brushless motor that’s me
I’m with ya Ran it on 2s for few Now got brushless system it it Would bought the granite BLX But I like switching my own electronics Gonna post video here soon
Absolutely ! I found a BNIB granite 4x4 for $200 . Fb marketplace local
Can you share info on wheels really awesome build
Proline 1/10 scale 2.8” MT Badlands