Відео

Me funcionó a la primera

for the price of ink they should make these printers flawless. I hardly used mine before getting B200

So yummy!

This error happened to me as the 3 sheets of paper jammed in my printer. And Goodness gracious, you are an angel <3 The first step with resseting and moving the printer head worked as you show, but then again it hit with the error B200. So I again did the steps from the beginning and then I turned the printer off. Afterwards I just did the basic reset. Holding the stop button for 2s then the power button alongside with that. Then I pressed the stop button 5x as i was holding the power button. After that I started the printer and it is good as new. Thank you tons. I cannot thank you enough!

didnt work for me

I LOVE YOU!! Thank you so much, you saved my ass (and my printer)! Had to take out the print head and clean it, but after 3 hours drying it was perfect.

Thank you so much. It works.

Worked for me. After first reset, I tried to print and B200 came back. So I turned it off, unplugged , opened up, plugged in again turning it on and waited until the print head was center then unplugged, plugged in again, and closed it. B200 was gone and it took a print command from the computer and while loading the data it died! It went black, no power on even though plugged in! Can not get it to power on at all!

rien ne marche avec ma MG5250 mais si je l'allume avec le capot ouvert, et que je la ferme pendant qu'elle fait son cinéma, j'obtiens des impressions parfaites. Mais avant la première impression, je pense qu'elle fait un nettoyage, ce qui consomme de l'encre. merci ! Cela prouve qu'il s'agit bien d'une obsolescence programmée. ACHETEZ en FRANCE où l'obsolescence programmée est interdite. En Belgique, l'obsolescence programmée n'est pas découragée par l'Etat pour faire marcher le commerce. Et qu'en est-il en Hollande? Merci !

Thank you so very much! I needed to print important information and you saved me from buying a whole new printer last minute

Thank you! I thought I would have to replace the printer, and buy all that new ink. Bravo!

I followed your video. But the result is zero. After cleaning Black ink tank is not recognized by the printer. Its a new one. Hence I am getting a B200 error. Any other recommendations to overcome this error?

Goood

When you can't move the printer head (don't force it), you can try to close the lid when it start moving to the middle after turning on, it did the trick to remove the error. I also tried to clean the head and use blow drying (not too close) to speed up the process. I have MP560

Amazing! It worked on my first try. My printer is the Canon MG6150. B200 error. I just moved the cartridges/printhead in the middle. Had another error which is no grey ink. I just pressed the reset button, and it printed again. Thank you very much.

Thx so much from the UK

holy shit it worked, Thank you

you were lucky unlike me.didnt work for me

Okay, so I followed your instructions and the code came up again. 🙄🤨 I cleaned the heads not as carefully as you did...lol. 😄😄 By this point I was frustrated and this printer is over 10 years old. Kind of dried the heads off with a paper towel and the whole time avoiding the green plate at the back. Still damp I put it into the printer and changed out the low ink cartridges. Load and behold it prints! Yay! I'm still in the market for a new printer, waiting for a great sale. This old beast still had several cartridges to use up, so hopefully it lasts that long. 😊 Thank you so very much for posting this tutorial! God bless. 💖🥰

Thank you! this was so helpful! I was so stressed thought i need a new one.

Thanks brother, it worked!! I watched many video but only this worked

Nice printer u have here

And another win! Thanks for the advice. I'm guessing one of the issues with all 365 commentors are that we're letting the color cartridges dry out, thereby mucking up the head. Thanks again!

wooooo thank you so muchhhhhhhhhhhh..

Thanks a lot. it resolved my issue.

awsome many thanks covering the 4 fixed mine on cannon ip3600

Thank you !! Finally my printer is working again !!

Thank you worked a dream

It still didn't work. I check the ink, did the reset thing, clean the head still giving me the error.

Thanks!!! 😁

Thank you for your vidéo! it worked on my Canon MG5150 after step 2 but i have just used some special spray instead of the water bath and that took me about 15 mn. Good to save some money, time and..the biosphere. Thanks again S&C.

Merci beaucoup

Люди добрые подскажите, проделал все как показано, с 1 раза загрузилось в меню, но после команды копирования опять b200 выскакивает, как собственно и на видео, потом видео обрывается и уже печатается нормально, вопрос что было проделано чтобы печатало? Заклеиваю контакты, работает только черный цвет, хочется чтобы полностью функционировал.

I'll let you know in 10 hours if it worked

Thank you This worked on my cannon MG5420. 🙌🏽

.....excellent first method .....fixed my printer....thank you.

Like you cleaned the head - no joy. But your trick worked. Very many thanks. It's not so much the price of a new printer its a case of what you know!!!

Amazing...worked for my MG6120 on the first try...thanks so much!!!

B200 problem is solved, your technique has worked . Thank you

Thank you for a real solution

That’s work for my printer MG6120 too. Thank you very much.

Thanks so much..i had cleaned printer head previously but your tip of closing lid just as it moved to the left worked.

How often do you have to clean your print head to prevent error msg hassles? Well, I guess it depends how much you print with it.

This worked, but I had to do the reverse order; clean out the cartridge, THEN close the lid as the mechanism runs to the left. Otherwise it wouldn't work even after cleaning the cartridge, and B200 would continue. Also cleaning the cartage took 5 DAYS as ink seemed to endlessly leak out! Thank you!

You my friend are a lifesaver. Many thanks!

Thanks, you are amazing!!! its work!!!

It worked! So happy! Thanks 😃

So far So good using your first part my MG5150 now works..I was just about to tear it apart! .. Not joking!!! thank you so much 😊ª"˜¨¨¯¯¨¨˜ª¤.¸`*•.¸*•¸★Thanks!★¸•*¸.•*´¸.¤ª˜¨¨¯¯¨¨˜"ª😊

Hi so I cleaned it up but it still does the error when I try to print my model is MG5350

Does it work on mg5350