Відео

You just turned key. Ehen key is inserted keybeill not turn.. your videonis pointless

Thank you very much... This was very helpful.

Amazing and very timely that I found this. I was about to replace my brake switch when I went to look at the white wire you mentioned. Well it was cut and no longer connected. I replaced my turn stalk a few months ago and think I pinched this wire. I put an inline wire splicer on and connected both sides and I have brake lights again!! Thanks for the tip!

Thank you for this video, same me lots of time to know I don’t have to keep taking it apart 😅

I bought it on Amazon, just type in Toyota 4x4 overlay, plenty to choose from $6-$13 bucks, tires are 295 60r20 (34 inch)nitto ridge grapplers, currently running a 3/2 lift, 1 1/4 bora wheel spacers, half inch bumper spacer( see my video for the spacers) no rubbing or cutting any plastic in the wheel wells. I kept the original mud flaps and only removed that small mud flap in front of the front tire cause I thought it looked stupid

Where did you buy it from ? What size tires are those

This videos gets a like, a share, and a shout out. Can't believe it worked.

Could you describe what that yellow switch is and does? The one right at the end/under the ignition tumbler?

I’m glad it helped you. Thank you for the feedback

Great video! I'm a 70 year old woman. You've made it easy for me to do a DIY

So far so good, we use it about 4-5 days a week for about 4 to 6 hour, for the price I don’t expect it to last forever, but I’m happy with it so far

How has the bulb been working for you?

I haven’t had any issues with any of them and they get abused by teenagers, max psi on all those boards is 14psi, but honestly when you get to 9 or 10 psi the things are rock hard. I always stop at 12 psi but I’ve used them at 10 psi just fine

Have you had any issues with the Kohala seams bursting? I found a good deal and your video sold me. I read some people are having issues with blowouts though.

I'm going today to check out a 2017 seadoo spark that's been sitting for two years crank no start. Comes with trailer half off

Thanks this worked on my jeep

I had a similar issue with that white wire on my '98 Tahoe. But I found that that specifif wire is too short and, depending on the angle of the steering wheel, the wire gets stretched and shorts out when braking. Thats been my experience with mine.

Life saver thanks for the video

Great tip on opening the back body without pulling the whole tub

Helped out. Thank you

Thank you 🙏

My cover is hard AF to pull off! I feel like I’m gonna break it if I yank too hard. Jeep wrangler 2017

😊,,. .. .q

Glad it helped. I stay away from the dealer for repairs and do all the work myself. I would suggest everyone else does the same. These dealers will sell you a ski in 5 minutes after you walk in the door, but tell you it’ll be 5 weeks before they can get around to fixing it, and good luck if it’s even fixed when you get it back

Just scrolling videos as I just picked up a 2023 trixx exactly like this, old stock from our local dealer. No issues with that clamp as of yet (just hit 10 hrs this weekend) however, 2 hull bolts fell out on one side... so your thoughts about dealership techs is exactly on point! Looks like we have the same techron socket set also...weeeeeird. I'll be setting the torque as you did here when the bolts get delivered (I did call in a claim warranty, they are ordering the parts but I'm not letting them touch it).. thanks for the info!

Would this work if something is stuck in the ignition? I thought I would have to get it out to start it, but this video has me thinking otherwise...

wtf can you even plug up to it? It won’t even run 1/4 hp submersible pump. Useless dog chit gm

Had the no crank issue with mine over the past weekend as we were trying to get it in the water. So with the exhaust sensor supposed to be monitoring exhaust pressure and what not, were you seeing the pwc throw a "Limp Home Mode" code on the screen? It's currently at the dealer right now and at this point we've had the worst customer service dealing with their service department. If I can fix it myself I will if I don't have to deal with them.

Dude your a life saver! Thanks foe this video, it worked perfectly!

What screws did you use to mount the lights to the aluminum frames?

I'm having the issue with a 04 Jeep Wrangler 4.0 just put in a new motor when I press clutch in and start it motor wants to take off And peg out so I shut the key off what would cause that problem I cleaned throttle body That's still same issue

Great review, good job! Thanks

Worked for me, thanks

How in the absolute fuck did this shit just work for my car 😭

Thank you buddy, I was stuck and u saved me , Your a true life saver i used my shoue and a wrench,, i have a jeep grand cherokee ✨🌟😎🇲🇽💯🕺🏼

So hoping this fixes my no brakelights issue on my 1999 gmc suburban. Have replaced brakelight switch and turn signal. There is no power to back brakelights. All fuses are good.

I have been struggling with the same issue and try a lot of cleaning products with no good results. Finally I found your video! Thanks for sharing!

Thanks much

Where can i order a new invertor for my 2015 GMC sierra?

Thanks for the info

What is the spacing for the holes on the spinnerbait rack?

Nothings wrong with that, some has to lookout for the everyday working man weekend angler little guy like me. I appreciate guys like you. Thank you

WRONG!!!!

Thanks

Thank you for the reply. Yes I’m very thankful to have the wife that I have, unfortunately before I figured out I had this issue, I was offered a $400 credit for trading in my iPhone 11, if I had known that before hand I definitely would have kept it. I just hit 1000 subscribers so I will be giving this to one of them soon. I’ll be doing a raffle soon. Stay tuned and thanks again

1. You thank your wife a million times for being a sweetheart for getting you an iphone 15! 2. You USE the OLD phone as a TOOL, with JUST the camera... ..... Problem solved.....

where you get yours from mine was simple as pie

You saved my day thank you for sharing

It didn’t work!!!

Thanks man