Відео

Use the tools that came with the machine. The red dial can be set anywhere within the range steplessly. 12 o clock = 4mm 3 o clock = 3.5mm 6 o clock = 3mm The dial only moves half a turn on the right hand side like in the video, dont force anything. Make sure that the locking screw is loose before you adjust the dial or you might damage the slot with the screwdriver. You can find more detailed ...

Adjusting the give on the Cobra can be done with or without removing the grip. Make sure that the screwdriver is properly seated in the slot and centered in the grip before turning and dont appy more force than needed. Have the screwdriver sterilized before use. If you remove the grip it can also be adjusted with your fingers. The give hardness can be felt by pressing down on the plunger. Keep ...

If you have the Neo version you can convert it to use with regular cartridges, Cheyenne or Kwadron type. For more detailed descriptions view the manual: www.inkmachines.com/sites/default/files/Instruction manual_Cobra_rev.1_en.pdf

If you bought the Regular cartridge version and want to convert it to Neo-cartridges you need to get the No.270 Regular to Neo kit: www.inkmachines.com/products/spare-parts/scorpion-x2/no-270-regular-neo-kit?active_product=532 And a grip for Neo-cartridges: www.inkmachines.com/products/grips/cobra-grips If you bought the Neo version you should already have all the parts required. For more detai...

Pairing and some other basic functions. Make sure to install the latest version of the InkMachines app. The same functions applies for the Scorpion X2 powerpacks. For more detailed info view the manual. www.inkmachines.com/sites/default/files/Powerpack for Cobra

Beskrivning

Beskrivning

Here is a vid to show more how the RPS-600 works. Settings are stored and follow each Powerpack, just tilt the machine to make it active. Powerpacks weigh 65g / 2.3oz. Very small diff compared to a normal clipcord cable. Runs about 5 hours each without charging. The system also includes a Boost mode function that gives the machines about 30% more torque compared to other power suppy units when ...

The RPS-600 wireless power supply is a system designed for tattooing without cords attached to the tattoo machines or the foot switch. Powerpacks are made with leading edge battery technology weighing only 65 grams designed not to interfere with the hand more than the machine normally does. Once the machines are rigged with Powerpacks the main unit will sense which machine is picked up and reca...

How to change cam on a Stingray tattoo machine