Відео

What you are seeing is Completely Normal. Once it becomes 100% full, keep driving @ moderate speed it will go into “Filter Cleaning”. You will see percentage go down gradually to 0%…

@@refrigeratedrentalvansllc9520 : Thank you Mr Refrigerated. God bless you for this help.

Use Google translate please.

Doesn’t come with any cover. It’s all open by design.

@@syedullah613 thank you so much. Very helpful

I hope it works for you!

@@syedullah613 Totally worked! Planning to do a chrome delete, so that should also solve it. Thanks for making this video!

@@alissarichardson4737 So happy it worked! Yes. Putting wrap on it will totally solve it.

Great 👍🏽 Cheers!!

Did you ever find this out

My Truck is 2014 F450 Lariat. The option I Enabled here is called “Force Regeneration Request”. which means that once a soot level reaches a criteria, it will send you a prompt if you want to perform a forced Regen or static Regen. Yes that’s all I did, Cycle the key it will prompt you, then the same screen where you see your engine trans running temperature will have another slide next to it.

Worked on my 2016 F450. I was able to do a forced regen at 48%.

If I enable this feature, will the truck still regen on its own automatically or will I have to initiate the regen every time?

I have a 2016 f350 6.7 Need to do a forced Regen and can not from the dash. I take it I can set this feature with the tool and a laptop? I also want some basic gauge cluster to give me real time monitoring Thanks

@@ronfox9842 It will still automatically do it, but when you see 95% you should keep driving till it’s back down to 0%. And this is the key to make your system last forever. Most of the problems arise when you are driving around with 100% and the truck needs to regenerate.

It means the vehicle is plugged into shore power & engine is running at the same time. Before starting the engine unplug the cable.

Did it resolve the wind noise issues?

@@Justin-ng6lt do you have a specific whistle noise, or a general loud wind noise at the rear mirror area?

@@mamu679 between 10-30 mph, coming from driver left or passenger right. Sometimes one side sometimes both!

Hold the Down & Equal Key 5 seconds that will take you to locked menu. Change the set point by Changing SPL screen.

Hold Down + double line together for 5 second. It will take you to backend don’t chang any other settings. Go to SPL and change it to your desired set point.

No there isn’t. What is showing on your display?

@@refrigeratedrentalvansllc9520 it displays the temp and the snowflake is illuminated but the compressor on the engine isn’t kicking on and the unit isn’t running. Last week I wiggled the ac compressor wire and the unit kicked on and worked all day. The next day nothing. (2016 transit 350)

@@RetroRidesChicago maybe bad compressor clutch wire connector.

@@syedullah613 that’s what I thought but I disconnected it no corrosion and I cleaned it still nothing

I need to figure out what fuse or relay controls the auxiliary compressor under the hood. Problem is I can’t seem to find any info because people install these things differently I’m seeing. Or maybe I’m low on refrigerant? If I put 12 volta directly to the compressor everything works just getting that compressor on seems to be the issue

Start up? Driving or Standby?

Yes, you are supposed to use 10 AWG cable no longer than 50 Feet, make sure you have a dedicated circuit & 30amp breaker.

You can either put your questions here or email me at syed24ullah@hotmail.com. Thanks

Costa Mesa Should be located on the side if the van is equipped with standby

Shawn Joseph same instructions when it’s on Standby operation. Please explain what you mean by compressor not working....

@@syedullah613 thanks for the quick reply. When the engine is off and I'm plugged into the house outlet the unit powers and the red indicating light is on, but it seems like only the intake fan is on. The main fan on the top is not working. And the air blowing in is not cold. ( It does blow cold when the engine is on, I got it to 44 degrees Fahrenheit)

Shawn Joseph the outside unit fan on/off automatically when it reaches certain threshold. I would take it to TK dealer, it should work and get cold with it plugged in also...

Pattay's Performance what is the code showing on your unit?

@@refrigeratedrentalvansllc9520 thanks for your response, I dont know bc I cant pull it up.

I have a Thermoking V 200 Max when I need to start it’s a showing 50F what is problem I don’t know please can help as 🙏🏻🙏🏻

How to turn off the alarm ,? Pls,ty

Alpay Şen I like to help but please describe in more detail. Is the compressor & Fans coming ON?

Anthony Grilli on the back of the control unit you will have to remove plastic cover that’s where it is. Be careful with the connectors.

syed ullah awesome!! Thank you!

FixItNick There could be a multitude of different things that can cause it not to blow. The Freon can be charged in the engine bay close to the compressor or at the top.