Відео

Hi thanks I think the horn is the same as the one fitted on the black swan. Thanks Al

@AlFoxysNarrowboatLUNAR I think so, it looks the same

another AliExpress purchase 😂😂

Hi thanks for the comment. I have heard of it but never gave it much thought. The inverter does have a ac2 output so I will look into it thanks Al

@@AlFoxysNarrowboatLUNAR Somewhere in the Multiplus configuration it is possible to declare a condition rule that will energize AC2 when battery state of charge is greater than say 95% and solar is delivering charge. The relative benefit from this depends on how much time you will be off-grid and not clocking up daily cruising miles.

Hi Dave I have see you have put a video on just haven’t had time to watch it yet. Yes I have run all the Earth points to a buzz bar and when the weather gets a bit better i will continue the run to the main Earth point in the engine bay. How’s the boat all good I trust thanks Al & foxy

That sounds interesting where did you get that from

@ Amazon / eBay 10amp Wi-Fi relay low voltage in and will switch from 1 volt to 250v ac/dc out work very well 👌

@@johnaston6440thanks I will have a look at one

Hi the relays are 10a DC rated

@ impressive for something so small!

Thanks it’s been a task. But it’s a part of the build I have most been looking forward to 😀 but after about 60 hours of work i am glad it’s nearly finished 😃😃

You deserve a medal tackling all that yourself

Thanks mate for the info and glad you like the results it has taken me about 60 hours so far 😂

@@AlFoxysNarrowboatLUNAR Yeah but it's fun and now you know every inch of the wiring so if problem arises you know where to look :)

@@FlashGormlessthanks I am a big believer in diy only if you have a idea of what it do as you know some jobs you need to know what you are doing. But like you said any problems in the future I should be able to sort them quite easily 😊😊

Thanks mate it’s been months in planning 😂

Hi Lee & Ali thanks. It’s not really that difficult to fit. When are you back on with your boat. Thanks Al

Boat safety this weekend 😊

Good luck with it. Sure it will pass with no issues

@@AlFoxysNarrowboatLUNAR hopefully, we are hoping to vlog it. We shall see !!

⁠will look forward to seeing it

Thanks we are very happy how it’s working out. I will be wiring the control panel up in the next vlog. So I will be showing how it works. Thanks Al

Thank you! 😊

Hi iam using lifpo4 4x 304 amp packs. 48v is great in some cases. But charging it can become very expensive for the equipment and mods to the alternators. Thanks Al

Hi there is always a deal to be got when spending that much 😂

Thanks glad you enjoyed watching thanks Al

Hi yes there is a few quids worth but it’s quality stuff. Yes I will be putting a cupboard around it at some point. Just easier with out one for now. Thanks Al

Hi Stuart it definitely is 😊

Hi lee & Ali thanks we are really happy with how it’s looking now. It’s made of quartz thanks Al & foxy

Thanks, you too! Mate

Hi lee & Ali Thanks. The quality is top notch and a top company to work with. Thanks Al & foxy

Thanks for that I just couldn’t remember what they were Called 😊

Thank you! Will do!

Hi mate it’s got a stick on rubber seal on the back of it. But I have to take it back out to fit some switches so will probably put some on it when it’s finished. Have a great Christmas and new year thanks Al.

Hi the best way is to talk to titan about your requirements. And they will give you an estimate. Thanks Al & Foxy

Thanks for the comment I was thinking about putting a skin fitting in as the tank as loads of outlets on it. But I am going to see how it goes with just a small amount of water in it first.

Thanks Neil we are very happy with it 😊

Thanks mate. I will be finishing it with the danish oil like the rest of the oak trim. It’s easy to use and quick 😊

Hi yes I think so what you looking for I might know where to get something. Or maybe I have already got some thanks Al

Hi lee & Ali thanks we are very impressed with the quality and the price was ok 😂 too thanks Al & foxy

Hi thanks for the comment. I have sanded back the chrome but it didn’t make it into the Final Cut of video 😊 we are both very happy with how it’s coming together thanks Al & foxy

Hi thanks I have sanded back the chrome. The part that I mentioned it got cut out of the video. Thanks Al & foxy

Hi we got the radiators from the radiator outlet online thanks Al & foxy

Hi I did say that I had seen it on the net about sanding down the chrome first. And I have. The bit that I say that has ended up on on the cutting room floor as they say 😊

Hi yes they are oak 48mm x 8mm. Sorry but can’t say where I got them. But if you search for them they are oak door trims. I have seen them on fb marketplace thanks Al

Hi lee & Ali thanks yes they take I lot of cutting for all the different angles as you two know 😊 the weather is better this week. Titan are coming to measure up for the pram cover on Tuesday morning so hopefully it’s not raining 😊

@AlFoxysNarrowboatLUNAR oh wow good for you!!

Thanks mate

Hi Lee & Ali thanks it was a lot of work but happy with the results. Not sure about the handles yet I have some small black and chrome handles. Time is flying by only 18 weekends to the end of march 😮 thanks Al & foxy

Hi lee & Ali the paint work needs a good clean and some wax putting on but that can wait till next year 😊 hopefully the wall will come out good when finished. Thanks Al @ Foxy

It’s getting there now mate but still got 19 weekends till launch day 😂😂

Hi lee & Ali yes the engine bay is very cramped now. The boat was covered in bits of fireworks but no damage done so all good. 😂 early next year we will be on the cut for a meet up thanks Al & foxy

You got that right!

Hi Lee & Ali we are impressed with the led strip lights. Loads of small jobs to finish off now but it’s getting there 😊

@AlFoxysNarrowboatLUNAR they do look really nice. Yes it's all the small jobs that take the time. Are you going in in the spring?

yes we are looking at going in probably end of march. Can’t wait to get it finished 😊