Відео

Thank you so much. I had been living with this problem for 4 years.

Thank you. My valve assembly was a little different just a quarter turn and then pry out instead of unscrewing the whole white bit. But this got me there. Thanks for the no fluff fix video

Great Video, very well made. A big help!!!!! Thank you.

Thank you so much for your helpful videos. I subscribed because I love the title of your channel. “don’t be a chicken DIY”

This was extremely helpful for my 21 year old KitchenAid. Thank you VERY much!!!

God's work. Thank you.

I'm looking after my neighbors house while they're away and noticed their faucet wouldn't swivel when I went to water the plants. Thought I'd spend a few minutes surfing the net to see if there was a simple solution and found your excellent video with the identical faucet right out of the gate. In addition to soap and water, I used some vinegar to break down the calcium buildup that was present. Thank you for sharing

You're a genius! Thank you. Sep 11, 2024.

Great video, thank you for sharing this! I didn't have the exact faucet, but its a kohler and looks very similar. And it was JAMMED up, didnt want to turn. Took the handle off, and as i was unscrewing the top cap, water started to come out...not good. So, i went to plan B! I actually keep a dropper bottle full of water and baking soda, for when i need to clean electronic corrosion off batteries...decided to flood the rim with this solution, and to my utter amazement...it started to be able to turn a little! So, dropped more in, worked it more, and it loosened up more and more as i worked it back and fourth. Then i dribbled some 3-in-1 oil along the rim, and as i worked it back and forth more, it loosened up even more. Now it works pretty close to where it should be, just a touch stiffer than new but useable. Anyway, this is what worked for me...but, your video was invaluable in figuring out exactly what to do! Even though i took a slightly different approach. Thanks again!

where does the grease go? At the bottom?

Great video! To the point and shows how to do it, how it actually works, tells you what to watch for / watch out for . . . I'm going to be looking at a lot more of your channel!

Out Standing Job! Thank you!

Excellent video. Thanks for helping me.

I have a 2013 Flex. I cannot get the wiper off after I get that 15mm nut off

great video, I wasn't getting noise but a errorcode 4-3. (see other vids on how to get error code). so I cleaned out the disposal and found some hard plastic, that i think broke off from other parts of the dish rack :(. I manually spun the motor from above as well as the impeller cutter you showed. put it back to gether and it has at least started a test washing..... wish me luck. Thank you.

I suppose one has to remove the handle to be sure the plastic spline sleeve is broken, order a replacement kit and then install kit.

Worked for me. Thanks

Is the pcm located underneath it???

You are AMAZING! I had to watch the part about how the mechanism works several times to understand how to adjust your instructions to apply to my switch which is quite a bit different than yours. Same parts, they just look a lot different. I almost gave up, but I did it! Another success story for Ms. "Macgyver"!!! Thank you!

She is a socialism.

Thanks for this video! Worked as shown!

Thank you, super helpful

Thank you for the video and for taking the time to explain the process.

it's crazy just how much work it takes to remove all this when so many other brands are just a twist off canister style filter at the bottom. Just absurd

Thanks. I thought I needed to buy a replacement dish washer, but 4 hours of cleaning did the trick. The filter had never been maintained over the 15 years I have owned the machine. Who knew? There was slime in all the passageways. It was brutal getting it all out, best I could. I can't imagine many home owners doing what all is required here. Some, but not many.

Ok. I am back with my strap wrench and finally got the top threaded sleeve off. I still can’t get the shell under to pull off as she’s an in the video. I got to drop something something different to loosen it up. Any suggestions?

My cover sleeve won’t come off. Gone to get me a small strap wrench.

Good job!

Hi DYI, any idea where one can buy replacement button valve springs and/or spray nozzles of the one you have above? I have repaired 2 of these sprayers by stretching the springs but in our complex we have over 100 identical faucets that will need to be serviced going forward. Thank you in advance!

Thanks dude!

Damn, you get a sub just for being so helpful. Easy peasy, no B/S, straight to it. We ruin so many things just by taking them apart incorrectly. Except now, I have to take the pump apart because I can hear something inside there.

That is way too much trouble!

Be carefull. My driver side drain boit pushed through to places unknown. Still looking for it.

My Toster ( RUSSEL HOB ) didn't use for one year. Now, this won't go down stay in middle. Ps. help me.

My Toster ( RUSSEL HOB ) didn't use for one year. Now, this won't go down stay in middle. Ps. help me.

Thank you for posting it gave me the confidence to pull harder to remove the bottom cover. Of notee, some models you can remove the filter screen from the base by inserting gently prying all around the plastic on the screen edge. It comes off like a snug cottage cheese lid. There is only a slight lip..

Thanks for this clear and concise video!

Thank you!

Hi that was a really helpful video - very well done and easy to,follow! Thanks so much!

This video was very helpful and great. Thanks!

Solution for me was to use three screws instead of two at each joist.

thank bud 2 hour drive to no know what the heck i was looking at. saved me sir. thank you.

Thanks for a great video that saved my weekend! This was on my task list when my wife was out of town for the weekend, and we were fed up with the sprayer mode splashing water everywhere. I followed your steps, and they helped me get mine apart. The buttons on mine were a little different, and the little cartridge cylinder was a little trickier to remove and access the spring, but I never would have made it that far without your clear and detailed video!

So the part that screws into the sprayer head went back into the faucet after I took the sprayer off. Now it's stuck and I can't get it out to put the sprayer head back on. Any tips?

Thanks for the video i had a similar problem with the faucet ,the stream wasn't working i did exactly as per your video, and now both the stream and spray both are working Thanks

A genius indeed! I’ve been dealing with this issue for 6 months….coming home to a pool on a pool. Changed GFI, cleaned pump, etc. with no luck. Was getting ready to replace pump and tried this trick. Works like a charm. Can’t thank you enough for sharing!

Wonderful video and I'm in the middle of cleaning mine right now after it started making loud sounds. I have removed so many little pieces of broken plates, lemon and grapefruit seeds, chunks of plastic and straws, wads of lint, and other debris that was blocking the flow but I cannot for the life of me get the blade cover off. It's that very last cover that you are using the pick tool on to pull it up. For some reason mine just will not budge or lift up. Do you have any advice or tips? Edit: nevermind. I got my utility knife out and ran it down along the entire seal where that cover seats against the main housing. It was caked with detergent residue. I cut through it and then was able to remove it. It's unbelievable how much residue and debris was in here. Three blade gear was completely wound up with lint, too, which was preventing it from spinning. Now that it's all cleaned out I can't wait to reassemble everything and run it! It should be like brand new! 😅 LOL

Thank you for your instructions.

Those two ‘rubber boot’ (passenger and driver’s side) drains can be easily pulled out and cleaned. No need to vacuum or poke them clean. They slip right back in. Hope that saves time and helps.

Good directions! I was able to solve my issue. Thank you!,