Відео

Hello. Not sure about the servo as it uses a strange size and its five wire (from memory). Sometimes you can grind the stops on the steering to increase the angle.

@@carloshnunez yes I was thinking that.

@suvsteve so far so good. But my concern is there will be a reduced lifespan.

@theminiatureconstructionco4556 Yeah definitely I put them on a eazyrc bronco and killed the motor and then tried them on the V2 fms 1.18 k5 and thought actually no then on a mn111 and then that struggled to over a Lego brick I like the tyres and the design but I'm now thinking they are to heavy so might look into trying the lighten them .

@grrfy yes mate, I can't fault them.

@@Rc_Alex_76 what's an MB100?

@@shadyhazza OK that's good to know.

They do bounce well!

@@carloshnunez just some funny out takes. I have some wheel weights on order! 😀

Is the rock van the same chassis?

@@theminiatureconstructionco4556 Not the same it is better crawler, also the evo but the 2 speed gearbox reminds me all the modern cars with a lot of problems

@@carloshnunez problems? Your not selling it to me....🤣

@@theminiatureconstructionco4556 🤣😂😅😁😀🤣

let me know. 😀

@theminiatureconstructionco4556 i will do! I found larger propellers i could also swap in

@@RustyShakleford1 what in the pump housing?

@theminiatureconstructionco4556 yea there was one with a different pitch for the impeller. I also found a large 55mm propeller metal for direct drive propeller shaft motor

@RustyShakleford1 oh OK. 👍

Yeah they are normally a little more frugal.

I'm not sure. There is decent amount out of the back of one of these jet boats. No prop to foul in your net either?

@theminiatureconstructionco4556 yea thats what I was thinking the upside of no prop to foul but I'm not sure if I can get replacement impeller for the jet if I suck up sand and damage it. How much thrust would you estimate the jet to produce? 1lb or more?

@@RustyShakleford1 I think AliExpress may do spares. or buy the really cheap Tyxin version for a parts donor?

@@RustyShakleford1 not sure about the pull but its decent for that size boat.

That they are🤣. They can be improved massively though. So I get it.

Thanks 👍

Its a right little beast!

😅

The A was an intentional omission. 🤣

I was referring to the physical size and stated capacity. But I get your point with regards to connector type.

This version is noticeably better.

​@@theminiatureconstructionco4556Glad you noticed these improvements and made a video about it, MN and WPL upgrades their model but most people actually missed these small details.

@@aces6262 if I find out something new i do like to share it for the benefit of all. Appreciate you taking the time to comment.

You can defiantly fill them from the top.

I'm genuinely impressed with how good this little crawler is.

I've got some brass wheel weights on order. Was going to try those first. But yes it needs a lower COG.

Hello!! For the money its a belter. But yes it has the turning radius of a cargo ship!!

It was so wet out there. But the little truck is just brilliant.

Yes it sort of takes two pulls to go in reverse. I think its the brake function.

​​@@theminiatureconstructionco4556THX for reply. So its normal even its annoying...so I cant reverse instantly like on SG116max AKA 16101 etc.? What a shame because its perfect dor 110euros with extra 3S battery incl.price.

​​@@theminiatureconstructionco4556I thought that 14210 and 14209 have same electronics, but I cant turn on 3s mode (5 times ESC power switch). Is there 3S mode on 14209?

@@kultus26 I thought they were 3s compatible?

@@kultus26 I thought they werec3s compatible

There is a wiring diagram.

Thank you my friend!!!

If memory serves me correct 2S.

@andrejgubo1522 you can paint the board with a conformal coating. I've used silicon in the past but it's a bit messy.

It did!!!!

@933pilgrim not a clue, sorry.

@Majkel_G if you're feeling adventurous, what a boat sticking a 2 speed in?

@@theminiatureconstructionco4556 …I think 2 speed needs more modification in construction?

@@Majkel_G I did say if you are feeling adventurous. What about the new 280 from wpl?

I'm beginners…difficult to say…I bought 260 on the beginning….I’m waiting for delivery….is something on the market more powerful, professional without body modification ?

@…and without electronic modification ;)

@redflame_-ey9lh hello! If you're just starting out, then the MJX range is a good place to begin. Excellent performance, plenty of spares backup and loads of fun. If you are thinking of buying one off Banggood. Please do me a massive solid and use the link in the description. The commission is negligible, but it makes a big difference if there is traffic from my channel. 👍👍

@theminiatureconstructionco4556 yes im now looking at the maverik quantum2 xt brushless for 500 au but on top of that i need the 3s lipo batterys and a charger.

@@redflame_-ey9lh are you not going to ease yourself in? 😆

@@theminiatureconstructionco4556 nah

Sadly I think I may be coming down with it.🤣

I've seen parts advertised for the fire horse and the Thunderstorm together, but never actually seen one? I shall have to have a look now.

I'm going to have to have a look for that transmitter as well.

@@theminiatureconstructionco4556 It comes with the fms apache fire horse hobby plus rock van, rushmore and others

@carloshnunez I had a quick look for it last night. They look virtually identical. So now I know why it's referred to as an FMS EasyRC, as I was unable to find it in FMS's current lineup. 👍

@@carloshnunez what do the little red switches do on the old transmitter?

Its really nice to use. Feels like a decent quality piece of kit. And they do a few different bodies as well.

not the best choice, but what did they envision as the predominant use for the car. I bet they think no one will use it seriously off road?

Ill send some links :)

Metaphorically speaking :).

I think he just caught in the right place! Laugh about it now but not funny at the time!!! Well perhaps a little bit :).

@caseycastaway7850 Anything available on AliExpress.?

@@shadyhazza was that a MASH reference? 😃

@KPtain_RC Thank you very much, and welcome aboard! 😀

@theminiatureconstructionco4556 thanks 🙏 🤝 👋 👋 👋

@@carloshnunez yes the winch would make Al, the difference.

@WildCaptures yes that would be my choice, too. Appreciate you using the link. It goes a long way. 👍

@@grrfy hahaha haunted by the ghost of a dead GI 👻

@@theminiatureconstructionco4556 The Ghost Of Sgt Smith

@grrfy wooooooo

@@theminiatureconstructionco4556 😆👻

@@davidjhoffman9461 that's what they sell it as. Chinese scales have never been totally accurate.

@@theminiatureconstructionco4556 I seen the video yeah don't quite look like a 110 scale still pretty nice though I already found it I'll be getting it next week add to my collection thank you

@davidjhoffman9461 your welcome! 👍