Відео

I have a problem with “overdub to imported loop” ın rc600..I want to overdub with one touch to add imported loop” ..but rc 600 ı have to touch 2 times to overdub and its risky to missing loop s parts maseure.. 1)this video for that? 2)You use 1/2/3 button ? Camera show ys 2 button..rec/play and play/stop..but you stopped it with another button it was all stop button or 3.button? Thanks bro

Hi Rob, I Just saw your vidéo! Nice set up! Could you explain or make a video about "how to set up all these effects"? Cause I'm stuck with only A B and C on bank A and can't find the way to go further..! Very frustrating 😅. Thanks again!

Where do you get those add on knobs?

Super good settings. You helped me a lot now!!!!! Thank You!

Ive got the FS 7 but wish I would of bought the 6. I think side buy side is easier to target when you are live and in the moment. I made my 7 with less important commands like all stop but I don't use it for recording anymore. Its too easy to miss the switch you are going for and accidently hit b when you are going for a. In my opinion side by side is less chance for error and a miss when in a live situation. Thanks for the video. This was a quick start guide for me to get through the menu diving a bit faster than the manual

What a shit video speak more clearly next time

Is there any command in ctr fnc or assigns in Rc 600 to activate certain input bank on a push of a pedal? I could not find one. If there was such command life would have been not so disfunctional. I could just assign the corresponding "activate input fx bank x" command to the play track pedal and the pedal would play the track and activate corresponding input fx bank at the same time. There are only input bank on/off, and inc/dec commands. They dont help. Do you know anything about coding the system for these pedals. Is making a command to activate certain input fx bank on press of a pedal so difficult? If it can be done when using external fx pedal, can you suggest any video link on how to do that?

is it possible to assign two fx bank to two inputs and use them simultaneously. I play guitar and sing at the same time. Both my guitar input and mic inputs need fx. I can make only one fx bank active at a time which is assigned to one input; another input does not receive fx. How am i suppose to get two fx banks for two inputs at the same time

I wish certain track could be assigned certain input fx bank. So that if i play certain track, corresponding fx bank in applied to input only without affecting the playback. Is there a way to do that?

Can I turn my acoustic guitar into a bass sound with the octivate effect on this pedal.

can i make 6 rigs/patches, attach them with 6 loop tracks, and turn them on with the respective 6 loop tracks when I am looping?

so many new ideas in this! thank you... this is very unique for using the RC600!

nice video! the bounce function on track 6 towards the end of the video....are you using that to bounce tracks 1-5 to track 6? so that then u have tracks 1-5 which u can erase and record new music to? and can this all be done on the fly? thanks!

Interesting setup, I'm still learning how to use this thing so I can make tutorials for my channel. Those FS5s that connect together look at interesting.

Hey Rob, is there a way to hear more than 4 effects simultaneously ?

can you turn all that 16 effects at the same time??? i thought you can only use 4 effects at the same time :D

This is really helpful, man.

Can it do Wah Wah Fx?

Excellent video. Do you know how to use an external pedal to turn on the the effects view (mode 3) on the RC 600? Thanks

Very helpful! I have a boss volume pedal and was wondering if there was a way for me to control loop levels with this volume pedal? I'm currently missing the fader features on my boss RC300 but was hoping there was a way to do this with my volume pedal and perhaps switching between loops with custom buttons.

Hi.. is it possible to control memory tempo with expression pedal?

Great video , thx for the great info. Just starting to set mine up . This is do helpful

that was confusing.

Whenever I enable Distortion effect the volume is like 3 times higher than no effect or a different effect. For example I am playing my electric guitar and I have the chorus effect enabled and the guitar is at an appropriate volume coming through my PA system. Then I enabled Distortion on top of Chorus and it’s 3x the volume way too loud. Or even if I disable Chorus and enabled Distortion it’s 3x too loud. So I could just turn the volume knob down when I switch but that’s not very efficient if you’re switching in the middle of a performance. Can you tell me the appropriate way to lower the output volume ONLY of the Distortion effect?

How do you keep effects from bank A and B for example to affect mic and instrument at the same time? Without switching off

Hello Rob, I have the EV-30 expression pedal and I can't configure it to adjust the volume of the guitar only, can you explain how you do it?

Im totally confused🤔

Thank you for posting this it is very helpful for a beginners and your camera work is great! I noticed you have labels on your footswitches which show multiple controls, B =Trk Play Stop & Undo. My understanding was you could only control one thing per switch like Play Start & Stop or Undo unless you wanted to do Stop, Start & Undo all at the same time but why would you want to Undo at the same time with Start and Stop? I guess my question is...is there a way I am missing to set up the Boss footswitches to do more than one function say "Stop & Start" as one and "Undo" seprately on the same B switch. Kind of like "Banks"? Thank You Subscribed!

Not every expression pedal works properly with the RC600 If you’re buying one just buy a Boss one to be sure it will track correctly

Would be nice if you have connected the output to hear the changes of what you're doing!!

Hi, can you tell me how to configure Fs-5 to start and stop the rhythm while playing a loop. Thank you

appreciate your content. I'm struggling with this and can't find away around it unfortunately. I'm in mode 1. I want bank 1 to be receiving my drums from an external source. I want to be able to play that at a short loop say of 4 beats. I want that to be the bpm of the track so I set that first and it saves me looping drums for say 4 x 4 beats. I then want to go in to bank 2 and set a loop length say of 12 bars. now this is where it gets tricky and can't figure it out. say I've recorded guitar rhythm in bank two and now want to add other parts like harmonies or bass parts on the guitar. I want to add that to bank 3. for some reason they won't quantize together and the loop seems off. I know there's a global quantize but is there a way to set it so that when I set drums for 4 bars that banks two and three can be played longer but be quantized together? you can do this on the rc300 just by putting bank 1 in free mode and other two banks in auto mode. I bought this pedals for sound quality improvements, more inputs and outputs but it doesn't seem to do the one thing I want it to. I'll have to take it back otherwise.

Hi 👋 I can't seem to find a way to turn off the click/tap tempo/rhythm. On the rc300 it was on the outside next to the tap. I can't seem to find it anywhere which is really odd. Surely ppl like to free loop without a click or tapping in a tempo? Please help

Nice job, Rob...just got mine and am playing with the optimal configuration...

Very smart setup. I just got mine and might do something similar.

Hey there! Thanks so much for the helpful videos! I was wondering if you know if I can set up my fs7 to do 2 different things with the a and b buttons on the pedal. I can't seem to get it worked out. for example: I'm trying to set pedal "A" to mute and unmute the mic. I got that. But I'd like to set pedal "B" to turn on and off the octave effect. thanks!

Where did you get the colored button for your switches?

I love this video but man I'd love to be able to see your monitor. The light reflecting off has me a little lost. Keep up the great insightful videos!

Great videos, really helping and well done🙏🌻

Hi, Great video! Thank you, How about these knobs? Where are they from?

HELP !!! Almost everyone has either plastic or aluminum colored switch covers. Can't find them anywhere online. Thanx Muchly in advance.

Hello Rob. I'm Michael & am 72 y/o. It's easy to follow your how to's. Thanks for sharing your Rc600 knowledge. Keep em coming!! Would you consider your process of updating the unit? I have attempted to update mine but get a message that the update was unsuccessful (I'm using a macbook pro) but I don't know I t it's out of date or user-error michael

Hey, I loved this idea but pushed a little further. Instead, I kept my track select in toggle mode instead of advance, but I don't use the push for effects. I came from playing an RC 50 so I've only ever had 3 tracks and I hardly used the third one. I have a hard time thinking I will ever need 6 with the way I work. So, I sacrificed loop phrases 4, 5, and 6 and instead made Mode 2 my input effects. Buttons 1, 2, 3, and 4 are my effects on Bank A. Then button 5 is my bank select so I can get to all 4 input effects banks. Then, I switched button 6 to color toggle and used and assign to make button 6 my mode 3 button. Then, Mode 3 is my track effects and I made button 6 on mode three my mode 2 button. So, my Track Select button toggles from my 3 phrase looper to my input effects and then my button 6 works like a toggle between input effects and track effects where I have access to all the banks on each effects page with button 5. So, I guess this pedal for me is really a big effects processor with a 3 phrase looper built in instead of a big looper with some effects.

Video on how to set up track 3 stop as bank toggle

Thanx for your great videos Rob! I got the RC-600 for just 2 days now. I've got a simple question: How do you put this control options in your display? (Memory, Rhythm level, Bounce, Display mode)? And how do you make the cycle of the "track select"? I mean how to get quicker to the FX area. Thank you for helping me!

👍🏽

Nice video Rob. Where can I find those caps you have on the foot switches. Great idea

Great Video

Hi Rob..FS-7 pedal is the same as a FS-6 for functions..Doesn't need a battery to function.Needs a power plug for the LED's to work.I have 1 it takes up less space.On 1 of my Empty Memory Patchs..The FS-7 is set-up for Start/Stop and Fill for the Rythem.. I like you can adjust the Rythem Variations with a Control pedal.I'm going to make a patch that does that....On the RC-300 I used 2 Rythems using a temporary switch going to the Control plug-in on the back of the RC-300.To change the Rythems.And MIDI'd Out of the RC-300 to a Alesis SR-16 drum machine..That does 2 Fills per patch.Using a Temporary switch. Had 2 drummers going doing that.Haven't done that on the RC-600..YET..Liked the 12 step Transpose with a control pedal.Going to do that too.On the RC-300 I only had 2 Empty Template Patches..I'd Copy 1 of those to a empty patch.And All my setting were done and I was ready to loop.Think I'm going to have at least 4 or 5 Empty Patch Templates I can Copy to a empty patch slot..Using the RC-600..Love to see a rig rundown.If you or anyone else knows where to get a 5 pin MIDI controller with 8 or 16 potentiometers on it ..That's something I want for Volume control for all tracks and Rythem and main volume..Or USB,that can plug into the RC-600-without having to plug into a computer.16 pots would really be great..Have even more control.I've been looking but haven't had any luck.I know it's out there somewhere. I Picked up some Very usable information from your video..Thank You..Would like to see what you do with MIDI..👍👍

Just watched the Sweetwater Demo for the GX-100..Lot of Power there.I Love rotary and vibrato.That does it very well.Cool you can drag and drop effects,SO easy.Been using a Fractal AX-8 since they came out .Had the Fractal Ultra rack-mount before that.Have the SY-200 guitar synth..It has a Hold Function.You can play electric guitar while it holds a Synth note or chord.RC-600 has a Freeze function in the effects..That Does the same thing.Using a patch bay with the RC- 600..To and from a mixer..A buddy has a Katana 50,he Loves it.I think it sounds really good..I only play at home for the Most part too.Got in on the Early-Bird Ordering on the Spark amp..Looked at yours and the corner of mine..Same..Now I have a amp for somebody coming by to plug into..I plug a CD player or WMA Player into it in the garage..It sounds great doing that.It's great to see all the communication between everybody who has a RC-600..Sharing tips and how to's..I made a paper manual of the RC-600 Parameter Guide..My RC-300 manual had sticky notes and yellow marker where I'd need to look again,sooner or later.That has Really helped me get a better grasp of things with this..Best Regards👍