- 5
- 16 846
rizdan777
United States
Приєднався 12 кві 2020
Sycamore tree misses lucky driver
This driver may have had to change their underwear as a windy day and this angry sycamore tree almost took them out.
Переглядів: 105
Відео
Ort clouds?
Переглядів 434 роки тому
These clouds were captured on my surveillance system. Look closely as the first cloud moves from center screen to top left. Second moves from center left all the way to top right. Third moves from top left and exits about lower left. My back yard is surrounded by trees and hedges so I have ruled out reflections. The second cloud moves between my garage and gutter, so I've ruled out something on...
Manatee at Crystal River & Kings Bay Florida
Переглядів 364 роки тому
Manatee at Crystal River & Kings Bay Florida
John Deere 2155, 5220, 5420 brakes locking up
Переглядів 17 тис.4 роки тому
JD 2155, 5220, 5420 and other JD tractors with similarly designed brakes lock up and cause the tractor to drag. This is a very simple fix to a design flaw. A gasket and two O-rings are all that need to be purchased provided there are no other issues.
Snorkeling with a manatee at Crystal River, FL.
Переглядів 384 роки тому
Did a guided tour to swim with manatee. Left out the music so you could appreciate the sounds of this beautiful mammal dining. The manatee seemed to be as curios as I was and didn't mind our company. Several times they swam right under us as if we weren't even there. Although the water was cloudy this day, it was still a wonderful experience.
I have a 5410 doing this now and it is getting the housing hot, so hot you can squirt water on it and will hiss, not boil but close. It dries the water fast and cant hold your hand on it.
What's the gap between piston and friction disc? Someone help please
I wonder if you can help me, I have a John Deere 210 le Skiploader when I try to stop my Tractor the brakes pedals get stuck and then I have to release them with my foot , they just don’t come out on their own.
Was it locking up or just dragging?
Severely dragging. Not saying that you can't have a bad re-tractor. It just doesn't matter how strong the spring is if the pin can't return to it's original position due to the oil behind it. After replacing them and having the same problem occur on the same tractor, I noticed the pin and couldn't push it back in. How could the piston release the brake if the pins are staying out? Liquid doesn't compress so I slightly grooved them and no longer had the problem. We had the same problem with 2 other tractors and I didn't replace the re-tractors, just the o-rings and gasket, grooved the pins and didn't have any more trouble with those tractors again. Of course check for any broken spring or loose fit where the re-tractor seats in the piston. There is also a build up of gunk that can settle at the bottom that can not allow a total return. Always clean properly. Didn't make it a long video of the entire process, figuring you probably have some knowledge if you're attempting it in the first place🙂Best of luck
U make it look simple! Thankz for the tips!
Thanks for checking out my video and the positive remark!🚜
lol the long stop and then back up xD
Hopefully I’ll get to see him one day and ask what was going through his mind lol!
Nice, but the brake in this video is NOT the same as the 5420. It's also not the problem. The problem IS the retractors and the fact that the spring pin slips in the hole in the axle housing. JD upgraded the retractor with a stronger spring and slightly larger spring pin but you may have to knurl the outside of the spring pin to get it to grip better. Bad design.
I always appreciate helpful information. I’ve worked on these tractors for years and found that replacing those retractors did nothing to solve the problem. After simply putting the grooves on the sides of the pins, it allowed them to stay seated and no longer had to replace any retractors. I’ve done this personally to 4 tractors and never again had a problem. There are other problems that do exist with that design I agree but this does solve the problem in this instance. Good luck with all of your work.
Way to go!!! Gave me great info and confidence. Thank you for videoing this and posting to all of us out here.
Well done
Thanks for the quick fix. Made my life a lot easier. And saved me a ton of money.
Happy to help. Good luck with your tractor!