Відео

Because it was stronger... they are still stronger. You call stud pilot what i call bud wheels which sucked because constantly the studs would come loose before the outter nut. But even just 20 years ago hub piolet rims would crack a lot under heavy loads... unless you bought quality rims (and no one buys quality over cost). And also most shops dont have a beer bottle around to help center the rim of a dayton wheel.... if otc makes a tool im sure its $1000 dollars.

Has it held up over time?

Just started working for a farm with one of these and couldn’t figure out why it wouldn’t shift in low. This makes perfect sense. Thank you!

Sell me dat tonka truck

Clicked on the video to get the answer. Only got the same question aired. Disliked.

She's a cool old truck ,

i use thyese all the time the only thing bad about this brand is the base cracks apart i have had to contact dial in dustries they sent me out 2 bases for free you can crush 16 ounce cans as well i dont use the part that holds the cans to slow for me i can put one in at a time it takes seconds to crush cans i can crush 100 in about 2 minutes

good mechanical crusher dude, V.quick

It so you don't need to fumble with tire irons or a large machine to get the bead over the rim. It seems obvious to me.

I'm sorry I do not remember commenting on this video, honestly I do not remember ever seeing this video, After watching it I see anything funny about this.

I really enjoy your video''s, I enjoy watching you love to fix up, work, and really enthusiastic about learning about your Mack. I wish you great luck and safely learning that Mack, top to bottom, or head to tail.😊

I have a metal shed in tried the glue it didn’t work foil tape was a disaster too

You shouldnt be talking about driving or shifting

I'm going to be doing mine soon

123 in low slip to high then 45

hell man i had a 2 stick and drove the hell out of it loved that old mack not only i drove it one armed for 3yrs i miss my old mack the mack truck is a great truck

Super cruiser...great sounds.

check out southland trailers. i bought the SL714-16k which a far superior trailer to big wrecks(tex). better paint, better jack, 9 ton ram cylinder and aluminum ramps.

What. Is. Your. Top. End. Speed???

Oh yeah love that hard cranking and all that black smoke. I bet it smelled really good on that cold morning.

How much did it cost? Did I miss that?

The primary reason was because of the load bearing capabilities. Look at how the rim is supported by the hub. Look at the massive hub. Compare that whole setup to Budd rims. Relatively speaking, the Budd rims are flimsy.

I drove many of these as redi mix trucks. They worked great off road in muddy or sandy job sites.

I've seen guys take off all the nuts, struggle to pull the wheel off only to have a cleat or the whole wheel come off with an explosive impact and wipe them out and I mean legs broken beyond just a cast and set back in place. We call them spiders or widow makers in Australia because they've literally killed people who weren't careful. I always leave the nuts on the end of the threads, stand to the side and give them a little tap with a hammer or rubber mallet. Even then they still pop 😂

I drove them loaded as 1-2-3-4 in low, next gear change was low to direct, then 4th to 5th

Cab view would be more interesting

They had their advantages, the weight was on the hub instead of the rim and if off-road in and subject to lots of mud they did not fill up full of mud like bud wheels do .

""IF YOUWERE HIGH ON THEJOB BACK BEFORE 1980 WHETHER IT WAS-STREETDRUGS OR SOMETYPE OF A 🧠 BRAINSTIMULANT OR A SUBSTANCE- LIKE-COCAINE, ""DIDN'T NO BODY CAREABOUT NOTHIN BACKTHEN, ""THEREWAS NO DRUGTEST TO TERMINATE-YOU OR ORDER-YOU TO PAY A PENALTY IF YOUHAD OR SUFFERED AND-ACCIDENT WHETHER ON THEJOB OR OFF THEJOB, ""DUI AND DWI DIDN'T EXIST BEFORE 1980, ""PEOPLE WEREHAVING ALL TYPES OF CAR-ACCIDENTS BACKTHEN DURING THE-40's, ""50's AND 1960's, ""DRIVING WHILE DRUNK, ""NO PROBLEM, ""NO BIGDEAL, ""NO SUCHTHING AS DUI, ""DRIVING UNDER THE-INFLUENCE IF WHATEVER THEFUCK YOUWERE DRINKING BACKTHEN, ""NO ONECARED""!!!!!!!!!

""THEREWAS NO WORK-PLACE DRUGTESTING OR PRE-DRUG-SCREEN BEFORE 1980, ""IF YOU-LOOKBACK WAYBACK TO THE-EARLY-1900's, ""THEREWAS NO SUCHTHING AS A SAFETY-PROGRAM TO PARTICIPATE IN, ""PEOPLE DIDN'T GIVE A DAMN ABOUT SAFETY, ""FUCK A SAFETY-PROGRAM, ""PEOPLE WERE-DRINKING ON THEJOB IN THOSEDAYS, ""POLICE-OFFICERS WERE DRINKING ON THEJOB, ""NO BODY CARED ABOUT NOTHIN, ""ALOT OF MEN WERE-DYING ON THEJOB FROM ALCOHOL-ABUSE, ""MEN WEREDYING ON THE-JOB AT ALL OF THE-RAILROADS BACKTHEN BECAUSE THERE-WERE NO SAFETY-GUIDELINES ENFORCED, ""MOST OF THE-RILROAD WORKERS WERE-GETTING RUNOVER BY THE-BOXCARS ON THE-RAILROADS, ""YOU DIDN'T HAVE TWOWAY RADIOS BAVKTHEN, ""YOUHAD MOREMEN IN RAILROAD-CREWS IN THOSEDAYS, ""MAY 15 TO 20 MEN AS A RAILROAD CREW BACKTHEN, ""IN LATERYEARS THOSEJOBS HAVE DOWNSIZED, ""THE-RAILROAD WAS-IT THOSEDAYS, ""IF YOU GOTHIRED AT A RAILROAD YOUHAD A LIFETIME JOB BACKTHEN, ""MEN TOOKCARE THEIRFAMILIES AND KIDS BACKTHEN, ""AFTER 10-YEARS OF SERVICE AT A RAILROAD YOURMONEY WENT OVER INTO THE-RAILROAD RETIREMENT-FUND, ""BY THETIME YOU-RETIRED, ""YOUHAD A RAILROAD-PENSION, ""THEHUSBAND GOTPAID AND HISWIFE GOTPAID, ""HEY, ""RAILROAD-EXPRESS WASBIG IN THOSEDAYS, ""I HATED TO SEE THEM GO AFTER-A MANY 🌙 MOONS IN BUSINESS RAILROAD EXPRESS WAS A GREATCAREER BACKTHEN, ""UPS CAME-IN AFTER RAILROAD-EXPRESS CLOSED THEIRDOORS FORGOOD, ""EVERY AMERICAN RAILROAD HAD THEIROWN TRUCK-TRANSPORTATION -DIVISION TO MOVE THAT-FRIEGHT ALONG WHETHER BY RAIL OR IN BY HIGHWAY, ""I WILL NEVER-FORGET IT, ""EVERYBODY WAS DRINKING ON THEJOB BACKTHEN, ""FROMBEER TO WHISKEY EVERYDAY""!!!!!!!!!!!!!!!!!!!!!!!!!!!!

""YOUHEAR PEOPLE-ALWAYS YAPPINABOUT THE-1970's, ""THE-1970's WASN'T ALL OF THAT, ""MY FATHER WASDRIVING THOSE-OLDTRUCKS WAYBACK IN THE -1930's, ""SOLID-RUBBERTIRE NO SUCHTHING AS AN INTERTUBE NOT BACKTHEN, ""NO C.B. RADIO BACKTHEN, ""NO POWERSTEERING BACKTHEN IN THOSEOLD OUTDATED ""C""-CABTRUCKS, ""YOUWEŔE OPEN TO THE-ELEMENTS AND THEWEATHER BACKTHEN, ""NO AIR-RIDE SUSPENSION, ""NO HEAT TO KEEP THEDRIVER-WARM, ""IT WASDANGEROUS IN THOSEDAYS FROM 1900 TO THE-1920's, ""IT WAS DO OR DIE JUST TO KEEP A JOB, ""A MAN WAS A MAN IN THOSEDAYS, ""THATWAS-IT, ""NO ONE TO GO CRY-TO, ""IT WAS BE A MAN OR BE A MOUSE BACKTHEN, ""EVERYTHING WAS-MANUEL-LABOR IN THOSE-OLD-DAYS, ""YOUHAD TO WORK YOURASS-OFF BACKTHEN JUST-TO PAY THERENT ANDEAT""!!!!!!

""THE-DAYTON-RIM HASBEEN AROUND SINCE 1916 THE-PREHISTORIC-ERA, ""THEDAYTON RIM IS OLDERTHAN THETIMES, ""IT MAY-BE OUTDATED BUT RELIABLE, ""THIS IS BEFORE WW-1, ""THE-BUDD-RIM HASBEEN AROUND-SINCE 1947, ""I FEELTHAT THE-BUDD-RIM IS BETTER AND STRONGER-THAN THEDAYTON-RIM ON THE-STEER-AXLE, ""THE-BUDD-RIM IS MORE-STRONGER AND DURABLE THAN THEDAYTON-RIM, ""THAT-DAYTONRIM IS LETHAL IF YOU-DO NOT KNOW WHAT YOUARE-DOING""!!!!!!!!!!!!!!!

"They should be outlawed by the geneva convention in favor of T25 torx" amen

If you only had hand tools, they were a lot easier to do than stud pilot (budd) wheels. Mounted spares are lighter as well. Running an impact gun, it's a wash. And you can get tubless one-piece rims and tires to work on dayton hubs.

Awsome sound and look !!!! What's its engine?

Mack Attack! 👍😎

Mack Attack!😎👍

How is the old dog .. doing... and your self...

Thanks for the video man. I just took all that apart before seeing this video on my 04 247b. New joystick is $633.55!!! Will be here tmrw hopefully thats what my issue is hooked my new grapple up and it wouldnt open/close. Im not even putting the hvac plastics back in fuck it lol

that is made in China

I got an old mack that has an air direction that is not hydraulic. You could help me if you know where to fix it thanks antonio

do you have to change the seal every time you remove the dayton to change the breaks?

Any updates? Im looking to do this to my shop but I will wait to summer to do mine. Thanks for the information.

Theyre tough

I live in Cameroon in central Africa and i have a MARCK TRUCK MODEL R600 L with twins Stick but i now how many speed can you help me please

Turtle Beach

On the balance, are you still happy going this route instead of a pole barn with sectional doors?

Shut up and take my money!

How did you stop the air from coming in through the top of the doors? I had a seal on the outside but didn’t work so well . Now I’m thinking about putting a brush seal on upper header from outside.. what do you recommend? Thank you

My pops and I got an 14lp 16’ trailer and we love it!! Put it to work the first day we bought it!! But now we need a Dually! To haul more! 👍🏽

Do not follow his workmanship. Forks are not made to be reheated or welded on. If he bent one fork, it was because he was misusing the forklift fork in the first place. This fork is no longer factory safe.